• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.83-90
• /
• 2002

This paper describes the development of scientific payload system onboard the KSR-III. The ozone detector(UVR), Langmuir electron probe(LEP), airglow photometer(AGP), and magnetometer(MAG) constitute this system. The purpose of the ozone detector is to measure the ozone density profile and the LEP measures the electron density and temperature in the ionosphere over the Korean Peninsula. The AGP detects airglow in the mesosphere over the Korean Peninsular. The MAG provides rocket attitude and the magnetic fluctuation information during the flight. With the developed payloads, the ground calibration tests and the environmental tests have been performed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.7-7
• /
• 2000

과거 로켓엔진의 개발은 군사적, 혹은 국가 간 기술 선점을 목적으로 그 개발이 이루어져 왔으나, 최근에는 인공위성 발사, 대기관측 등 상업적 목적에 의한 개발이 두드러지고 있다. 이와 같은 상업적 로켓 개발에 있어서는 신뢰도와 경제성이 가장 중요한 요소이다. 한국항공우주연구소에서 개발중인 3단형 과학로켓(KSR-III)의 엔진은 상업적 목적의 인공위성 발사를 목표로 하여, 엔진 시스템의 단순화를 통한 신뢰도 향상과 엔진 제작비용 절감을 통한 경제성을 고려하여 개발되고 있다.(중략)

• Aerospace Engineering and Technology
• /
• v.1 no.2
• /
• pp.91-104
• /
• 2002

Jet noise of propulsion systems is major source of acoustic loads of launch vehicles and sounding rockets. The investigation of characteristics of jet noise is inevitable for successful missions. In this paper, the mechanism of generation of acoustic loads due to jet noise was investigated. The major parameters that change the characteristics of acoustic loads were also suggested so that effects of the parameters could be investigated. The temporal and spatial characteristics of acoustic loads of KSR-III was demonstrated. The results show that the maximum value of the acoustic loads is found in the octave bands whose center frequencies are 250 Hz and 500 Hz. Finally, the methods and the facilities for the further investigation of acoustic loads were proposed.

• Aerospace Engineering and Technology
• /
• v.1 no.1
• /
• pp.141-146
• /
• 2002

During dynamic flight by propulsion of rocket engine, in the atmosphere, the attitude control of flight vehicle can be accomplished by the aerodynamic fin actuator. But, in the outer space, the method of TVC(Thrust Vector Control) is only depend on for it. There are many systems which were developed for TVC. In our research, among them we adopted gimbal engine actuation system which could control the vector of thrust by swivelling rocket engine connected by gimbal. There are electro-hydraulic, electro-mechanical and pneumatic system which can be used as gimbal engine actuation system, but the electro-hydraulic system that has high ratio of output power to mass is preferred for the high power system. In this note, we made a mathematical model of the electro-hydraulic gimbal engine actuation system for the TVC of KSR-III in detail and on the base of this model we performed a simulation study. And then, we verified the model by making a comparison between the simulation and the experiments on the real system.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.26-26
• /
• 2000

KM(Kick Motor)는 항우연에서 주관하여 개발하고 있는 3단형 과학관측로켓(KSR-III)이다. 본 연구는 이 KM에 적용되는 추진제 개발로서 추진기관에서 요구하는 성능, 밀도, 연소특성, 기계적특성, 점화성, 추진제/라이너/EFDM 접착력을 달성하고, 장기저장시 추진제에 작용하는 온도, 중력등 하중에 대한 추진제의 내구성을 확인하는 수면예측시험을 통해 KM이 사용하는 기간중 요구성능을 발휘할 수 있는 추진제 개발을 목표로 하고 있다. 본 논문에서는 KM 추진제 개발중 1차적으로 추진기관 요구성능을 달성하기 위해서 추진제 성능분석을 통한 기본조성을 설정하고, 이 기간조성을 토대로 밀도, 연소특성, 기계적 특성, 추진제/라이너/EPDM 접착력 실험 결과등을 정리하였고, 추진제 성능을 확인하는데 일반적으로 널리 이용하는 있는 표준모타(ST-8)에 적용하여 이론적 성능분석 및 실제 연소시험을 실시하여 그 결과를 비교 분석하였다.