• 제목/요약/키워드: 2nd generation

검색결과 348건 처리시간 0.028초

Technical Trends of Rare Metal Recycling in the Next Generation Automobile (차세대 자동차용 희소금속 리싸이클링 기술동향)

  • Hwang, Young-Gil;Kil, Sang-Cheol;Kim, Jong-Heon
    • Resources Recycling
    • /
    • 제23권2호
    • /
    • pp.3-16
    • /
    • 2014
  • Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

Spectrum Narrowing Characteristics of a Tunable Ti:sapphire Laser (파장가변 Ti:sapphire 레이저의 협대역 특성)

  • 이용우;이주희
    • Korean Journal of Optics and Photonics
    • /
    • 제6권1호
    • /
    • pp.16-20
    • /
    • 1995
  • We have studied the spectral narrowing characteristics of the tunable Ti:sapphire laser pumped by the second harmonic generation of Nd:YAG laser. Ti:sapphire laser has uniform excitation distribution by both-side end pumping. We have controlled the angle of grating linearly and achieved the continuous selection of wavelength in the broad range from 705 to 835 nm. The output energy of $380{\mu}J$ at 790 nm. the spectral linewidth of $0.13cm_{-1}$ and the beam divergence of 1.2 mrad have been obtained. The wavelength range with power more than 50% of maximum output was 730-825 nm.825 nm.

  • PDF

The Larval Development of Beet Armyworm,Spodoptera exigua (Hubner),(Lepidoptera:Noctuidae) by the Widths of the Head Capsule (파밤나방 유충의 영기별 생장율 비교)

  • 고현관;이상계;최귀문;김정화
    • Korean journal of applied entomology
    • /
    • 제30권1호
    • /
    • pp.54-57
    • /
    • 1991
  • The width of head capsule of the beet armyworm, Spodoptera exigua (Hubner), was measured on the 5th generation larvae reared with artificial diet. The mean widths of head capsule of each instar were: 1st, 0.246 mm; 2nd, 0.35 mm; 3rd, 0.546 mm; 4th, 0.809 mm; 5th, 1.242 mm; and 6th, 2.185 mm. The coefficient of variation (%) of each instar were: 1st, 8.6; 2nd, 9.5; 3rd, 15.1; 4th, 11.2; 5th, 12.0; and 6th, 12.9. The growth ratio of each instar were: 2nd, 1.43; 3rd, 1.55; 4th, 1.48; 5th, 1.54; and 6th, 1.76. The fitness(%) to Dyar's law of the measurement of head capsule width were: 1st, 94.7; 2nd, 98.3; 3rd, 98.7; 4th, 94.8; 5th, 94.6; and 6th, 92.2. When the logarithm of the width is plotted against the number of instars, the calculated regression line is highly significient (Log Y = -0.819 + 0.1872X, $r^2$ = $0.9977*{**}$) and Dyar's constant was 1.54.

  • PDF

ASO(Analogue Switch Off) 시대를 위한 차세대 지상파 TV 표준 DVB-T2 기술 소개

  • Seo, Jeong-Uk;Kim, Hyeon-Sik;Jeon, Won-Gi;Baek, Jong-Ho;Kim, Dong-Gu
    • Information and Communications Magazine
    • /
    • 제25권8호
    • /
    • pp.55-61
    • /
    • 2008
  • 본고에서는 차세대 디지털 지상파 TV표준으로 알려진 DVB-T2(Digital Video Broadcasting-the 2nd Generation Terrestrial)에 대해 소개한다. DVB-T2 기술은 ASO(Analogue Switch Off) 이후의 환경을 위해 DVB프로젝트에 의해 개발되었으며 최신의 변조 및 코딩 기술을 채택하고 있다. 기존 DVB-T에 비해 전송효율을 30% 이상 증가시킬 수 있으며 2010년경에 상용화 될 것으로 예상된다.

Crystal Growth and Second Harmonic Generation of YCa$_4$O$({BO_3})_3$ (YCa$_4$O$({BO_3})_3$ 단결정 성장 및 2차고조파 발생)

  • Yu, Young-Moon;A. Ageyev;Jeong, Suk-Jong
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 한국광학회 2000년도 하계학술발표회
    • /
    • pp.88-89
    • /
    • 2000
  • The properties for self-frequency doubling (SFD) is unique phenomena for a small number of special single crystals. It is known that there are serious limitations to vary the concentration of active ions, for example high doping of active ions from 1 to 50 atomic %, in nonlinear materials. Until now, the Nd:YAl$_3$(BO$_3$)$_4$ (YAB) and Nd:(Ce,Gd)Sc$_3$(BO$_3$)$_4$ (CSB) crystals with high doping rates are well studied for the application of SFD purpose. They have much useful SFD properties, but also have big problems in crystal growth. In case of YAB crystal, it can be grown by solution melt method with very low growth rates and easy occurrence of inclusions. In case of CSB crystal, it has optically heterogeneity problems because of disarrangement of ions in huntite structure [1]. These problems make above crystals not so attractive for optical applications. Some popular nonlinear materials, such as LiNbO$_3$(LN), KTiOPO$_4$(KTP), LiB$_3$O$_{5}$ (LBO) crystals, are impossible to substitute by Rare Earth activators because of their crystallo-chemical problems of structure. When we dope active ions with the requisite concentrations for laser generation, it results in decreasing of optical quality of crystals or destroying of acentrosymmetric structure. (omitted)d)

  • PDF

Changes in the Occurrence Pattern of the Striped Rice Borer, Chilo suppressalis Walker, in Korea (이화명나방의 발생양상 변동에 관한 연구)

  • 이승찬;박해준
    • Korean journal of applied entomology
    • /
    • 제30권4호
    • /
    • pp.249-257
    • /
    • 1991
  • Chronological changes in the occurrence pattern of the striped rice borer(SRB), Chilo suppressalis Walker, were investigated by analyzing the data collected by 33 light traps of the countrywide monitoring units during the period of 1968-1989. And also relation of incidences between larval and adult populations, emergence time and percent emergence of overwintered larvae were observed in relation to the time of different rice transplantations. Spring moths of SRB in 1985-'89 generally emerged earlier than in 1968-'72 : 30 days earlier at Kwangju, 20 -25 days earlier at Sangju and Naju, 10-15 days earlier at Uljin, Jinju, Goyang, Milyang, Kimhae, etc., 5 days earlier at Suweon, Jinchun, Daejeon, Namweon, Haenam, etc. There was no change in the time of spring moth emergance at Weonseong, Chungju, Seosan, Yongju, and Nonsan. Summer moths of SRB in 1985- '89 also emerged earlier than 1968- '72: 20 days earlier at Uljin, 15 days earlier at Chungju, Yeongdug, and Habchun, 5-10 days earlier at the other areas except Yeongju. There was an overall countrywide decrease in the population of the 1st generation of SRB during the last two decades. The population of the 2nd generation also decreased in 19 areas during the same period, but increased in 14 areas including over 3-fold increases in Kwangju, Naju and Daegu, and double increase in Jinju, Milyang and Gongju. The higher larval population density of 1st genration was taken place in the earlier transplanted fields, whereas the population of 2nd generation were higher at mid-season transplanted (May 30), followed by May 15, June 15, and April 30. The peak of larval population appeared generally 15 days after moth peak in 1st generation, and 10 days after moth-peak in 2nd generation. The earlier transplanted fields were the higher percent damage due to 1st off-springs of spring moths, whereas the fields transplanted in mid-season were higher damage due to 2nd off-springs of summer moths. Average body weights of SRB larvae before overwintering were 65.6 mg, 61.2 mg, and 55.5 mg in early, mid-season, and late transplantations, respectively. In field cage experiments, emergence rate of the overwintered larvae ranged from 28.3-39.8%. In other words, body weights of overwintering larvae were heavier in fields by earlier transplantation, and heavier larvae showed higher percentage of adult emergence. The period from overwintered larvae to adult emergence was longer in the fields of the later transplantations; namely, 44, 49, and 51 days for early, mid-season, and late transplantations, respectively.

  • PDF

Sm-Nd mineral ages of charnockites and ilmenite-bearing anorthositic rocks of Jirisan area and their genetic relationship (지리산 지역 차노카이트와 함티탄철석 회장암질암의 Sm-Nd 광물연대 및 성인적 관계)

  • 박계헌;김동연;송용선
    • The Journal of the Petrological Society of Korea
    • /
    • 제10권1호
    • /
    • pp.27-35
    • /
    • 2001
  • The charnockite of Jirisan area occurs within the Precambrian high grade metamorphic terrane associated with anorthosite body as many foreign examples. Sm-Nd ages were determined from whole rock-garnet pairs, which turned out $1827\pm$32($2\sigma$) Ma for the massive charnockite and $1820\pm$22(2$\sigma$) Ma for the foliated charnockite with $$\varepsilon$_{Nd}(T)$ of $-5.5\pm$0.2 and $-6.0\pm$0.5 respectively. $^{87}Sr/^{86}Sr$ initial ratios calculated with the these ages are 0.71319 and 0.71532 respectively. The fact that massive and foliated charnockites show identical age, identical Nd isotopic initial ratio, and similar Sr isotopic initial ratios suggest that they were generated at the same time from the same material even through their present textures are different. Initial ratios of Nd and Sr of the charnockites are quite distinct from the mantle values indicating the influence of continental crust. Sm-Nd age determined from the titanium bearing anorthositic rocks intruding the anorthosite body, using mineral separates of garnet, plagioclase, and mafic fraction, is $1792\pm$90(2$\sigma$) Ma with $$\varepsilon$_{Nd}(T)=-3.9$\pm$0.2$. The ^${87}Sr/^{86}Sr$ initial ratios calculated with this age are 0.70616~0.70619. The charnockites and the anorthositic rocks occurring in contact each other also reveal the same age within the error, which suggest a genetic relationship between them. However, chemical compositions of the charnockites and Hadong-Sancheong anorthosites cannot be explained by igneous differentiation. Their differences in Nd and Sr initial isotopic ratios indicate different source materials. Therefore, temporal association between them suggests the possibility of the anorthosite acting as a thermal source for the generation of the charnockite as other studies.

  • PDF

A Study on the Welding Characteristics of Hastelloy C-276 using a Continuous Wave Nd:YAG Laser (연속파형 Nd:YAG 레이저를 이용한 Hastelloy C-276의 용접특성에 관한 연구)

  • Na, Gee-Dae;Yoo, Young-Tae;Shin, Ho-Jun;Oh, Yong-Seok
    • Journal of Welding and Joining
    • /
    • 제26권5호
    • /
    • pp.49-59
    • /
    • 2008
  • Hastelloy C-276, corrosion resistant alloy at high temperature, is used in chemical plant and power generation industry. In this study, process parameter of laser welding for welding property in Hastelloy C-276 using a continuous wave Nd:YAG laser was studied. As the result of experiment, laser welding did not show segregation or crack at heat affected zone compared to conventional GTWA welding. The melting zone showed cell dendritic structure along with welding line. In addition, planer front solidification is occurred from welding structure, and it was progressed to cellular solidification. Optimal process parameter for butt welding was 1.2kW and 2.0 m/min for laser power and welding speed, respectively. While heat input, output density, tensile stress, and longitudinal strain was $441.98{\times}103$ J/cm2, $29.553{\times}103$ W/cm2, 768 MPa, and 0.689, respectively. Lap welding of the same material showed greater discrepancy in tensile property during 1 line and 2 line welding. For 1 line welding, tensile stress was about 320 MPa, and 2 line showed slightly larger tensile stress. However, strain was decreased by 20%. From this result, lap welding of the same material, Hastelloy C-276, with 2 line welding is considered to be more effective process than 1 line welding with consideration of mechanical property.

Study on Commercial speed up and Catenary System in Gyeongbu High Speed Line (경부고속철도 운행구간의 전차선로와 표정속도 향상에 대한 연구)

  • Ahn, Young-Hoon;Choi, Jong-Bok;Park, Hyung-Woong
    • Proceedings of the KSR Conference
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.2306-2309
    • /
    • 2011
  • With the opening of 1st phase and 2nd phase in Gyeongbu High Speed Line, KTX(The Korea Train Express) and Sancheon(2nd generation of High Speed Train) are operating commercially on entire line. Gyeongbu High Speed Line can be separated as several sections. In this entire line, a few types of train has operating by it's own pattern. However, commercial speed of the line compared with the maximum speed of Train is rather slow. Through this study, I found the reason of the slow speed on the Catenary system and suggested a solution.

  • PDF

The Design of a Device for the Generation of a Strong Magnetic Field in an Air Gap using Permanent Magnets

  • Zezulka, Vaclav;Straka, Pavel
    • Journal of Magnetics
    • /
    • 제22권2호
    • /
    • pp.250-256
    • /
    • 2017
  • The article presents the principle of a relatively small device that makes it possible to generate a strong magnetic field in an air gap without electrical energy consumption. It describes the implemented design of this device, the method of the assembly of opposing linear arrays from two NdFeB magnet layers, its advantages, the possible ways of increasing the parameters further and its application in various areas.