• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.103-114
• /
• 2007

Gabbroic xenoliths in poikilitic and equigrnular textures and plagioclase megacrysts, up to 15 cm in size, are trapped in alkaline basalts from Sinsanri and Sangeumburi, Jeju island. Gabbroic xenoliths are gabbro norite in composition. Plagioclase is the most dominantly present $(42{\sim}94vol%)$, while olivine crystals are absent. Pokilitic xenoliths, interpreted as cumulates, include euhedral opx+cpx in oikocryst plagioclase. Equigranular xenoliths include subhedral to anhedral opx+cpx+pl. Based on the textural and geochemical natures, occurrence mode at the outcrops, poikiltic and equigranular xenoliths and plagioclase megacrysts were from rigid zone, mushy zone and crystal-suspended zone of the magma chamber, respectively. The gabbroic xenoliths in alkaline basalts of the Juju island represent crystallization products of relatively evolved basaltic magma at the Jeju magma reservoir beneath the Jeju Island. They are gabbro fragments that represent crystallization-isolation-capture processes associated with magma batches temporarily occupying reservoirs.

• Applied Microscopy
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2000

The wandering spider, Pardosa astrigera, had four pairs of ocelli that arranged in three rows on the cephalothorax. Along the anterior margin lay a pair of small anterior median (AM) eye flanked on each side by anterior lateral (AL) eye. Two large posterior median (PM) eye was situated on the clypeus behind the anterior row and still more posteriorly was a pair of posterior lateral (PL) eye. The visual cell of retina consisted of cell body, rhabdome, and intermediate segment. Bipolar neuron was found in anterior median eye (principal eye) and unipolar neuron in others (secondary eye). Rhabdome showed that arranged in PMeye and PLeye. But rhabdomes of AMeye and ALeye were irregular in retina. Except AMeye, incontinuous tapetum found in ALeye, PMeye, PLeye. Anterior median eye was similar to anterior lateral eye in length and posterior median eye similar to posterior lateral eye. Component size of eye were similar to 4 pairs eye in cornea. Size of lens, cell body, and rhabdome was similar not only anterior median eye and anterior lateral eye but also posterior median eye and posterior lateral eye. Vitreous body was large posterior median eye than others.

• The Mathematical Education
• /
• v.61 no.4
• /
• pp.613-629
• /
• 2022

This study explored the heterogeneous latent group on the influence of the learner's perceived math teaching method(instructor-centered, learner-centered) on math self-efficacy. In order to profile the characteristics of the detected latent group, the distribution of variables was confirmed, and multi-group analysis was conducted by SEM. According to the analysis results, two latent groups were detected, and the instructor-type group and the learner-type group were named. As a result of post-hoc analysis, the perception of instructor-centered classes and learner-centered classes, and the perception of math teaching ability were similar between the instructor-type and the learner-type group. But the instructor-type group had higher math self-efficacy, math interest, and math class engagement than the learner-type group. Also, in the instructor-type group, the effect of perception of math teaching ability on math self-efficacy and math class engagement was greater than that of the learner-type group. Whereas, in the learner-type group, the effect of math interest on math self-efficacy and math class engagement was greater than that of the instructor-type group. This study presented a new research method on the influence of math teaching methods on learners by applying the REBUS-PLS method.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.3
• /
• pp.198-204
• /
• 2008

Purpose: The purpose of this study is to analyze the merits and demerits of double bundle reconstruction and achieve improvements hereafter, by comparing the results of double bundle and single bundle reconstruction using tibialis anterior allograft. Materials and Methods: Twenty seven patients were divided to undergo either double bundle(n=14) or single bundle(n=13) reconstruction with tibialis anterior allograft tendon. The evaluation methods were AP laxity with KT-2000 arthrometer, isokinetic knee strength measurements, pivot-shift test, IKDC subjective score, Lysholm knee score, Tegner activity score, radiographic evaluations with postoperative MRI, and second look arthroscopy. Results: Lysholm knee score and Tegner activity score were significantly better in double bundle reconstruction. In pivot-shift test, single bundle reconstruction was evaluated as grade 0 in 10 of the knees, grade 1 in 1, and grade 2 in 2. Double bundle reconstruction was evaluated as grade 0 in 13, and grade 2 in 1. In second look arthroscopy, single bundle was evaluated as excellent in 6 of the knees, fair in 7, anteromedial bundle of double bundle reconstruction was excellent in 13 and fair in 1, and posterolateral bundle was excellent in 4, fair in 9, and poor in 1. There were no significant differences in other evaluations. Conclusion: Favorable outcome may be expected with double bundle reconstruction of ACL. However there are still need for improvement in terms of reconstruction technique and rehabilitation protocol to reduce PL bundle injury.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.14 no.2
• /
• pp.79-87
• /
• 1978

This is an experimental study on friction welding and heat treatment of engine exhaust valve materials whose welding combination is SCr4 as stem to 21-4N as head and SUH3 to 21-4N. In this study, not only the experiments of friction welding under the selected optimum welding condition and the examination of the mechanical properties were carried out, but also the heat treatment of friction welded specimens under the two selected conditions was taken to obtain the better welding character, eliminating the latent stress and the hardness peak which appeared at the welded zones of heat resisting steel(21-4N, SUH3) and low alloyed steel ($SCr_4$) friction weldments. The results obtained by the experiments and consideration in this study are as follows: I) It was experimentally proved quite reasonable that 'speed=3,OOO rpm, heating pressure Pl=8 kg/ mm2, upsetting pressure p, = 20 kg/mm', heating time $t_1$ = 3 see, upsetting time TEX>$t_2$ = 2.5 sec' was selected as the optimum welding condition for friction-welding the engine exhaust valve materials $SCr_4$ to 21-4 Nand SUH 3 to 21-4 N. 2) The results of the previous study and this one on friction welding of such dissimilar materials as SUH 3-SUH 31, SCr 4-SUH 31, SCr 4-SUH 3, SUH 3-CRK 22, SCr4-21-4 Nand SUH3-21-4 N agreed with each other substantially in the friction welding characteristics at welded interface zones. 3) It was also certified quite satisfactory that '600\ulcornerCX30 min. Xroom air cooling' as an optimum heat treatment condition of the friction welded materials SCr 4-21-4 Nand SUH 3-21-4 N was experimentally determined to eliminate the latent stress and the hardness peak at welded zones. 4) About 20% of the tensile strength before heat treatment of friction welded specimens was decreased after heat treatment 600\ulcornerCX30 min. Xair cooling, but the location of fracture was moved from heat affected zone to parent $SCr_4$ & SUH3. 5) Microscopic examination of the weld joints friction-welded and heat-treated under the above mentioned conditions revealed that the weld zone is very narrow and has a fine grained intermixed structure without any welding defects. 6) The above mentioned conditions can be also utilized as friction welding parameters of the other dissimiar materials for engine valve production.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.4
• /
• pp.309-318
• /
• 2011

In this study, the antioxidative effect, antibacterial, inhibitory effects on tyrosinase, inhibitory effects on elastase and component analysis of Phellinus linteus (P. linteus) extracts were investigated. The ethyl acetate fraction of P. linteus extracts ($2.94\;{\mu}g/mL$) showed the highest free radical (1,1-diphenyl-2-picrylhydrazyl, DPPH) scavenging activity ($FSC_{50}$). Reactive oxygen species (ROS) scavenging activity ($OSC_{50}$) of P. linteus extracts on ROS generated in $Fe^{3+}$-EDTA/$H_2O_2$ system was investigated using the luminol-dependent chemiluminescence assay. The ethyl acetate fraction ($0.0072\;{\mu}g/mL$) showed the most prominent ROS scavenging activity. The protective effects of extract/fractions of P. linteus extracts on the rose-bengal sensitized photohemolysis of human erythrocytes were investigated. The P. linteus extracts showed cellular membrane protective effects in a concentration dependent manner ($5{\sim}50\;{\mu}g/mL$). The inhibitory effect ($IC_{50}$) on tyrosinase of P. linteus extract was the highest at 50 % ethanol extract ($6.34\;{\mu}g/mL$), and the inhibitory effect ($IC_{50}$) on elastase of P. linteus was the highest at ethyl acetate fraction ($14.08\;{\mu}g/mL$). TLC, HPLC chromatogram and LC/ESI-MS of the ethyl acetate fraction obtained from P. linteus extracts were identified interfungin A (PL RPT-1a). These results indicate that extract/fractions of P. linteus can function as antioxidants in biological systems, particularly skin exposed to UV radiation by scavenging ROS, and protect cellular membranes against ROS. Extract/fractions of P. linteus can be applicable to new cosmeceuticals for antioxidant, antiaging, antiwrinkle and whitening.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.697-709
• /
• 1997

This study was designed to investigate the stress intensity and distribution produced by 1mm activation of retraction archwire with $0^{\circ},\;7^{\circ},\;14^{\circ}$ torque and application of high polk J-hook headgear during retraction of four maxillary incisors using the photoelastic stress analysis. The photoelastic model was made with a PL-3 type epoxy resin which was substituted by alveolar bone portion. Each retraction archwire was fabricated from .020' X .025' stainless steel wire which had vertical loops in 7mm height and hooks for high pull J-hook headgear between central and lateral incisors. The high pull J-hook headgear was applied 35 degree backward and upward to occlusal plane with 200gm pet each side The findings of this study were as follows: 1. In case of $0^{\circ}$ torque, the stress was distributed from cervical 1/8 to apex of roots of central and lateral incisors which were the forms of arc mode. When the high pull J-hook headgear was applied, the stress distributed by arc mode was presented from cervical 1/2 to apex of roots of central and lateral incisors. And the stress distributed by following the root surface was presented from alveolar crest to cervical 1/2 of roots of central and lateral incisors. The stress between apecies of central and Lateral incisors was presented also. 2. In case of $7^{\circ}$ torque, the stress distributed by arc mode was presented from cervical 1/2 to apex of roots of central and lateral incisors. And the stress distributed by following the root surface was presented from alveolar crest to cervical 1/2 of roots of central and lateral incisors. When the high pull J-hook headgear was applied, the stress distributed by following the root surface was presented mote apically than without headgear. The stress between apecies of central and lateral incisors was presented also. 3. In case of $14^{\circ}$ torque, the stress distributed by following the root surface was Presented from alveolar crest to apex of roots of central and lateral incisors. When the high pull J-hook headgear was applied, the stress distributed by following the root surface was presented stronger than without headgear The stress between apecies of central and lateral incisors was presented also.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.134-142
• /
• 1991

Since IR8, the first high-yielding rice cultivar characterised by semidwarf and high-tillering, was released in 1966, rice yields during the last two decades have apparently reached a plateau and subsequent efforts to further improve yielding ability have not resulted in visible gains. At this point of time, a new ideotype of rice plant would be necessary to increase grain yield potential. This experiment was conducted to investigate the yield contribution of different tillers within a plant in relation to an ideo type of rice plant. A low-tillering, large panicled IR25588 was compared with a high-tillering, small panicled IR58. Based on spikelet number and grain weight per panicle, the top six panicles in both low- and high-tillering cultivarswere significantly bigger than those in the other panicles. The top six panicles were M, PI, P2, P3, P4 and S1P2 in both cultivars. Their tillers had 100% probability of occurring. The top six tillers were characterised by earlier initiation and heading, longer growth duration, greater leaf area. and heavier culm and total dry weight per tiller. The top six panicles, based on grain weight was mainly due to higher spikelet number per panicle with little differences in 1,000 grain weight and percent fertility. They had also a greater number of high -density grains. The top six panicles were significantly bigger than the rest of the panicles in both low- and high-tilliering types suggesting that a new rice ideotype having six or fewer potential tillers or panicles per paint with 200 to 250 spikelets per panicle (a low-tillering, paicle weight type) may help increase grain yield potential since they have been shown to be superior physio-morphologically to the rest of the tillers.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.17 no.1
• /
• pp.43-54
• /
• 1989

In recent years plants have increasingly become in inferior part of the interior designing of large buildings. In 28 large buildings selected at random in Seoul City have been subjected to studies on utilization status of fille interior landscape plants. The results obtained were as follows. 1. Plant class found in Interior of large buildings were 59 class, especially Dracaena were the most predominent plants among them, and then comes Monstera, Phiodendron, Schefflera, and Washingtonia in that order. 2. The most abundant ornamental plant cultivars were Monstera adansoii(Monstera perutusa cv.), and then comes Schefflera arboricora(Schefflera Hong Kong cv.), Washingionia rubusta (Washingtonia palm). Rhapis excelsa, and Diffenbachia(Hawaii Snow cv.) in that order. 3. Foliage plants among the interior landscape plants showed 99.5 percent and Woody plants and Bonsai plants showed each 0.4, 0.1 percent. 4. Climbing foliage plants found in 28 large building observed For the present study were 9 cultivar, and the most abundant plants were Hedera (pittsburgh cv.) and Epipremnum (Marble Queen cv.) pl anted to clustered planting. 5. A majority of plants used to plastic pot, and most of 71an1s place on the floor. 6. Height of plants ranging less then 50cm were more frequently found, but ranging from 50cm to 2.0m were 4.3 percent and the most predominent height of plants were Canariensis showed 4m in the large buildings. 7. Interior light intensity in large building were shortage, therefore artificial lamp for formal growing needed to be equipped. 8. Purpose growth of interior plants were to in order visitors. 9. 7he superintendents prefered to used pot-stand. 10. The most important environment factor for plant growing were light, humidity, and water.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.276-284
• /
• 2023

Nitrogen is a major and essential macronutrient for plant growth and development. However, excessive nitrogen application can lead to ecological pollution or greenhouse gas emissions, consequently resulting in climate change. In this study, we used 153 genetic resources of rice to evaluate the effects of the levels of nitrogen application on grain yield and yield-related traits. Significant differences were noted in the yield and yield-related traits of genetic resources between two nitrogen application levels, namely, 4.5 kg/10a (NN: normal nitrogen condition) and 9.0 kg/10a (LN: low-nitrogen condition). Among the tested traits, days to heading (DTH), clum length (CL), grain yield per plant (GYP), number of panicles per plant (NPP), and number of spikelets per panicle (NSP) decreased by 1.8 to 17.9% when the nitrogen application levels decreased from NN to LN. The 1,000-grain weight (TWG) and percentage of ripened grain (PRG) increased by 2.6 to 11.2% under these conditions. Based on nitrogen application levels, two-way analysis of variance (ANOVA) demonstrated significant differences in GYP, NPP, and PRG but not in NSP and TGW. NPP exhibited negative correlations with NSP (-0.44) and TGW (-0.44), and TGW displayed a negative correlation with PRG (-0.34), whereas, GYP exhibited a positive correlation with PRG (0.37) and NSP (0.38). A similar pattern was recorded under the LN condition. NPP, TGW, and PRG were clustered as PA (principle axis) 1 under the LN condition by factor analysis. NSP and GYP were clustered as PA (principle axis) 2. These results demonstrated NPP and NSP as the primary factors contributing to the decrease in grain yield under LN conditions. In conclusion, we selected eight genetic resources that exhibited higher GYP under both NN and LN conditions with higher NPP or NSP. These genetic resources can be considered valuable breeding materials for the adaptation of plants to nitrogen deficiency.