• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.33-39
• /
• 1997

The crystallization temperature of an amorphous silicon (a-Si) can be lowered down to 400.deg. C by a new method : Double-metal induced lateral crystallization (DMILC). The a-Si film was laterally crystallized from Ni and Pd deposited area, and its lateral crystallization rate reaches up to 0.2.mu.m/hour at that temperature and depends on the overlap length of Ni and Pd films; the shorter the overlap length, the faster the rate. Poly-Silicon thin film transistors (poly-Si TFT's) fabricated by DMILC at 400.deg. C show a field effect mobility of 38.5cm$^{3}$/Vs, a minimum leakage current of 1pA/.mu.m, and a slope of 1.4V/dec. The overlap length does not affect the characteristics of the poly-Si TFT's, but determines the lateral crystallization rate.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.31-37
• /
• 1988

A phase different method to evaluate the instrument error of roundness measuring instrument and the form error of specimens for the calibration of the instrument is used. An instrument with a rotary table supported by an air bearing was calibrated by using the standard balls as a standard. The calibration was carried out repeatedly by setting the same ball in 12 phase angles(per 30.deg.) on the table and by recording their roundness errors with a magnification of 100,000 times. As a result of data analysis of all the observations, readout at each of 144 orientations(per 2.5.deg.) from recorded data file, the error of performance of the instrument and the specimens are separated. In the particular instrument used in the present experiment, the error of the instrument was determined with the accuracy of 0.0164 (.mu.m) and the form error of the specimens was determined with the accuracy of 0.0264,0.0172(.mu.m), respectively. If the instrument was calibrated by using the above specimens, then the accuracy of the measurement of roundness error can be improved to about 0.017 (.mu.m).

• Journal of Welding and Joining
• /
• v.1 no.1
• /
• pp.47-55
• /
• 1983

The mechanical and microstructural properties in high heat input welds of home-made SM 50 high strength steels were investigated and compared with the manual shielded metal arc welds. Also, the fracture toughnesses of the simulated weld-bonds with various thermal cycles were quantatively examined in order to provide the basic data for further development of the high strength steels for high input welding. Main results obtained are as follows. (1) The embrittlement degree and the coarse grained region in high heat input welds appear to be extraordinarily large compared with the manual shielded metal arc welds, while the difference in change of nicrohardness is not so large in both welds. (2) The embrittleness in high heat input weld-bonds is mainly affected by the size of coarse grain rather than the microstructure. (3) The fracture toughness in high heat input weld-bonds can be improved by controlling the cooling rate from 800.deg.C to 500.deg.C rapidly.

• 전기의세계
• /
• v.25 no.2
• /
• pp.100-106
• /
• 1976

A comparative study on thermal, static mechanical and dielectric characteristics were made over a temperature range of ca.20.deg.C to 320.deg.C and a frequency range of KHZ to MHZ band on low density polyethylene specimens crosslinked, respectively, by radiation and chemical method. The thermal property of both specimens shows that softening point appears to unchange by crosslinking, however, melting and liquidizing temperatures attain rapid increase at the imitiation of crosslinking. Mechanical properties show little difference to both specimens crosslinked by different method, further the behaviors were discussed in connection with the relaxation of molecular segments in amorphous phase. Dose dependent dielectric characteristics observed at ambient temperature under several fixed frequencies exhibit extremities at ca. 20 Mrad and the behaviors also were interpreted qualitatively by taking into consideration of dipole concentration change in amorphous phase together with the role of specimen geometry to the depth of oxidative layer. Observing frequency dependent dielectric characteristics, it was also proved that ionic conduction loss is appreciably greater in the specimen prepared by chemical method than that by radiation.

• Electrical & Electronic Materials
• /
• v.6 no.4
• /
• pp.366-373
• /
• 1993

고체구조와 절연파괴의 관계를 확실하게 알아보기 위하여 온도 100[.deg.C]의 실리콘유 내에서 1시간 열처리한 시료에 대해서 직류(DC)와 임펄스 절연파괴특성을 검토했다. 시료의 결정화도는 적외선 흡수와 X선 회절실험 측정방법으로 평가했으며 그리고 시료의 결정립크기와 분상은 시차주사 열량측정을 이용하였다. 실험결과 결정화도의 크기는 서냉, 수냉, 원시료 그리고 급냉시료 순으로 적어짐을 확인하였고 각각 70.23[%], 61.6[%], 56.75[%] 및 34.7[%]를 얻었다. 온도 30, 50[.deg.C]에서 임펄스 절연파괴특성은 결정화도의 감소에 따라 높아지는데 이것은 전자열적파괴를 시사하고 있다. 그리고 온도의 증가에 따라 임펄스 절연파괴강도는 감소되는데 이것은 Frohlich-type의 파괴이론을 제시한다. 또한 직류절연파괴는 저온영역에서 결정화도에 거의 의존하지 않지만 그러나 고온영역에서는 약간 의존한다.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.96-102
• /
• 1985

Innovated utilization of Korean kaolins as pharmaceuticals is attempted, for which relevant properties including adsorptive behaviours are observed in connection with their mineralogical structures. In practice, physico-chemical properties are assessed by means of IR, XRD and thermal analysis including DTA, TG and DSC. Elemental analysis of the ore specimens under investigation is carried out in conventional manners. It is found that the chemical compositions are varied significantly with sampling sites and primary classifications. The clay ores thus analyzed are mainly composed of halloysite species. Proper benefication of the raw clays is necessary so that authentic requirements for medicinal use may be satisfied. White-colored premium grade halloysite could be utilized as therapeutics with relative ease after purification. Evidence indicates that gibbsite-like impurities are intercalated between the 1 : 1 layered moieties. Thermal behaviours may be characterized in such a fashion that loss of free water occurs near 100.deg. C and further heatings result in liberation of bound water near 500.deg. C, with subsequent transformation into amorphous metastable entities. Through thermal activation, enhanced pharmaceutical effects could be envisaged.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.179-182
• /
• 2005

We conducted an extremely wide field survey of z ${\~}$ 6 Lyman break galaxies (LBGs) to precisely derive their bright end surface density overcoming the bias due to cosmic variance. We selected out LBG candidates in the Subaru/ XMM-Newton Deep Survey Field (SXDS) over the total of ${\~}1.0\;deg^2$ sky area down to $z_{AB} = 26.0 ({\ge}3{\sigma},\;2'.0 aperture)$ using i' - z' > 1.5 color cut. This sample alone is likely to be contaminated by M/L/T dwarfs, low-z elliptical galaxies, and z ${\~}$ 6 quasars. To eliminate these interlopers, we estimated their numbers using an exponential disk star count model, catalogs of old ellipticals in the SXDS and other field, and a z${\~}$6 quasar luminosity function. The finally derived surface density of z ${\~}$ 6 LBGs was 165 $mag^{-1}\;deg^{-2}$ down to $z_{AB}$ = 26.0 and shows good agreement with previous results from the narrower field survey of HST GOODS.

• YAKHAK HOEJI
• /
• v.19 no.4
• /
• pp.219-226
• /
• 1975

Physical and chemical properties on the aging inhibition mechanism of hydrous aluminum oxide were studied by means of dehydration velocity, activation energy, DTA, TGA, IR spectra, X-ray diffraction and TMA. During aging, changes may occur in the hydrous aluminum oxide structure which results in a loss of acid reactivity and in crystal formation to the hydrated hydrous alumina. The results obtained from the X-ray diffraction pattern and DTA, TGA thermogram studies showed that the aging product stabilized with either sorbitol or mannitol was hydrous aluminum oxide ($Al_{2}O_{3}{\cdot}xH_{2}O$) but the aging product not stabilized with either sorbitol or mannitol product not stabilized was hydrated hydrous aluminum oxide $Al_{2}O_{3}{\cdot}xH_{2}O{\cdot}yH_{2}O$. The activation energy of dehydration of the hydrous almina was about 17 Kcal. mol$^{1}$ deg$^{-1}$ which was observed a little less than that of 22 kcal.mol.$^{-1}$ deg.$^{-1}$ of or mannitol, the inhibition mechanism in the aging process from oxide is assumed to prevent the formation of the hydrated hydrous aluminum oxide and the aging process is thought of as analogous to the polymorphic transformations which occur as a system converts to its most stable state.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.652-659
• /
• 1996

Sintering characteristics and electrical properties of xPb(Mg$_{1}$8/Te$_{1}$8/Mn$_{1}$4/Nb$_{1}$2/) $O_{3}$-(1-x) Pb (Zr$_{1}$2/ $Ti_{1}$2/) $O_{3}$ (x=0.075, 0.1, 0.125) ceramics are investigated. A sintering temperature of ceramics could be reduced to 950.deg. C by a reaction between PbO and B site compound material. The physical properties of 0.1Pb(Mg, Te, Mn, Nb) $O_{3}$ - 0.9Pb(Zr, Ti) $O_{3}$ bulk ceramic with 3wt% glass frit(0.857PbO-0.143W $O_{3}$) were following : den = 7.95 g/cm$^{3}$, T$_{c}$=340.deg. C, .epsilon.$_{33}$= 754, k$_{31}$=0.3 and Q.=1780. The 3-layer piezoelectric transformer by using a tape casting method showed a good monolithic structure, and its voltage setup ratio was 2.5 times higher than that of a single device by using bulk ceramics.s.s.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.335-346
• /
• 2010

Recently, ESA (European Space Agency) has launched CryoSAT-2 for polar ice observations. CryoSAT-2 is equipped with a SIRAL (SAR/interferometric radar altimeter), which is a high spatial resolution radar altimeter. Conventional altimeters cannot measure a precise three-dimensional ground position because of the large footprint diameter, while SIRAL altimeter system accomplishes a precise three-dimensional ground positioning by means of interferometric synthetic aperture radar technique. In this study, we developed an efficient SIRAL SARIn mode processing technique to measure a precise three-dimensional ground position. We first simulated SIRAL SARIn RAW data for the ideal target by assuming the flat Earth and linear flight track, and second accessed the precision of three-dimensional geopositioning achieved by the proposed algorithm. The proposed algorithm consists of 1) azimuth processing that determines the squint angle from Doppler centroid, and 2) range processing that estimates the look angle from interferometric phase. In the ideal case, the precisions of look and squint angles achieved by the proposed algorithm were about -2.0 ${\mu}deg$ and 98.0 ${\mu}deg$, respectively, and the three-dimensional geopositioning accuracy was about 1.23 m, -0.02 m, and -0.30 m in X, Y and Z directions, respectively. This means that the SIRAL SARIn mode processing technique enables to measure the three-dimensional ground position with the precision of several meters.