• 미생물학회지
• /
• 제5권2호
• /
• pp.86-92
• /
• 1967

By cylinder-plate method was the antibiosis of 15 strains of Aspergilli examined, which were isolated from Korean "Meju" collected through all over South-Korea. The results are as follows; 1) Only two strains of Aspergilli (strain 1 and 9) sellected in screening test have antibiosis for the several gram positive and negative bacteria. 2) The activity of antibiotic produced by strain I was excellent, having been cultured at 25.deg.C in the Malt-infusion Czapek's medium of pH 3.5 to 7.5 for 6 days. 3) The activity of antibiotic produced by strain 9 was excellent, having been cultured at 25.deg.C in the Czapek's medium of pH 4.5 to 6.5 for 6 days. 4) When Aspergilli were cultured under optimum conditions which resulted, by experiments, the activity of antibiotic produced by Aspergilli was stronger than activity of 10.gamma./ml. streptomycin.eptomycin.

• 미생물학회지
• /
• 제3권1호
• /
• pp.7-10
• /
• 1965

Higher number in colony counts in coliforms, total aerobes, and anerobes was obtained from marketable soy-bean mash than front that in fermented tank. The ratio between coliform contamination and total viable cells was higher in red pepper mash than in soy-bean mash. E. coli, contaminated in soy-bean mash persisted longer at low temperature ($0^{\circ}C$-$^5{\circ}C$) than at room temperature and they vanished after seven days of storage at room temperature. At 30.deg.C and 35.deg.C, these organisms were more effected than at room temperature. E. coli cells, inoculated in red pepper mash, were not recovered at room temperature after five days incubation. Soy-bean mash, completely fermented at normal conditions, were detected to contain $10^8$- $10^9$ organisms per gram of sample. On the contrary, marketable soy-bean mash were found to have more than 10$^{9}$ per gram samples. Since samples were found to have more than $10^9$ aerobes and anaerobes per gram, contamination of coliforms seemed to be apparent.

• 대한수학회지
• /
• 제56권3호
• /
• pp.645-667
• /
• 2019

It has been little known when an Artinian point quotient has the strong Lefschetz property. In this paper, we find the Artinian point star configuration quotient having the strong Lefschetz property. We prove that if ${\mathbb{X}}$ is a star configuration in ${\mathbb{P}}^2$ of type s defined by forms (a-quadratic forms and (s - a)-linear forms) and ${\mathbb{Y}}$ is a star configuration in ${\mathbb{P}}^2$ of type t defined by forms (b-quadratic forms and (t - b)-linear forms) for $b=deg({\mathbb{X}})$ or $deg({\mathbb{X}})-1$, then the Artinian ring $R/(I{\mathbb_{X}}+I{\mathbb_{Y}})$ has the strong Lefschetz property. We also show that if ${\mathbb{X}}$ is a set of (n+ 1)-general points in ${\mathbb{P}}^n$, then the Artinian quotient A of a coordinate ring of ${\mathbb{X}}$ has the strong Lefschetz property.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.36-44
• /
• 1996

Drilling tests were carried out austempered ductile cast iron(ADI) to clarify the factors influencing the drilling characteristics of ADI material. The machinability of material was evaluated using high speed steel drill and cobalt contained drill of 6mm diameter. The spheroidal graphite cast iron materials were austemized at 900 .deg. C for 1 hour and then wear was kept at 375 .deg. C for 2 hours. Austempered ductile cast iron contains a great deal of retained austenite which contribustes to an improvement of impact strength. In this paper, machinability of ADI was invastigated by drilling experimentation. The results obtained are as follows:a) Flank wear incresses logarithmically with the increases of cutting time and proportionally with the increases of cutting force. b) Drilling hole number of about 2 times can be educed more step feed than ordinary feed due to the high hardness of ADI material and hardness increasing ascribed to the martensite of retained austenite.

• 천문학논총
• /
• 제27권4호
• /
• pp.213-216
• /
• 2012

We have collected dozens of mid-infrared spectra showing UIR bands from diffuse Galactic emitting regions with the AKARI's Infrared Camera (IRC) onboard AKARI, as part of the ISMGN Mission Program. The datasets cover various directions in the inner Galactic Plane ($|l|$ < 70 deg), in the outer Galactic Plane ($|l|$ > 70 deg), and in the off-Plane ($|b|$ > 2 deg). The variations in the UIR band ratios are examined in terms of the radiation environments judged from the far-infrared ($50-170{\mu}m$) spectral energy distribution (SED) made with AKARI/FIS All Sky Survey data at each slit position where mid-IR spectra were obtained. We have found that the band ratios of $6.2{\mu}m/11.2{\mu}m$ and $7.7{\mu}m/11.2{\mu}m$ toward the inner Galaxy are systematically higher than those toward the outer Galaxy and off the Galactic plane. Likely causes of the variations in properties of UIR bands in diffuse emission on a Galactic scale are discussed in this paper.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.455-462
• /
• 1996

Automobile Fuel Shortage Detecting Sensor, in this paper, was fabricated by using heat dissipation coefficient difference between gasoline and air condition the NTC thermistor of Mn-Ni Co system with the composition ratio of Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt%. The condition of sensor operation is that, for turn-on characteristics, the time of arriving at 135mA must be less than 180 second when the DC voltage of 11V is applied in the air condition of -10.deg. C and that, for turn-off characteristics, the saturation current must be less than 60mA when the DC voltage of 15V is applied in the gasoline condition of 60.deg. C. It is known, from the experimental results, that the resistance range and B-constant for the Automobile Fuel Shortage Detecting Sensor with dimension of 5*3*0.9mm were 850-1150.ohm. and 1150-1250.deg. C, respectively and the resistance range and B-constant were agree with that of sensor operation condition. When Bi$_{2}$O$_{3}$ of 0-0.5wt% was added to Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt% composition, the resistivity and B-value were 380-430(.ohm.-cm) and 1930 - 2030, respectively. Particularly, for Bi$_{3}$O$_{3}$ of 0.25-0.5wt%, the sintering density of over 90% and the operation characteristics necessary to Automobile Fuel Shortage Detecting Sensor were obtained. The difference of heat dissipation coefficient gasoline and air condition was 15 times.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.140-149
• /
• 1985

본 연구는 오오스테나이트계 STS 316 스테인레스강에 대하여 온도 550.deg. C의 대 기중에서, 변형율제어에 의한 인장-압축에 크리이프 유지시간을 갖는 고온저사이클 피 로시험을 하여 변형율폭 및 크리이프 유지시간이 피로수명에 미치는 영향과 파단면을 주사형 전자현미경으로 관찰하여 크리이프-피로 상호작용이 피로파단면에 미치는 크리 이프 효과를 실험 고찰하였다.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.67-82
• /
• 2004

The purpose of this study was to evaluate the function and the safety of an additional weight shoe developed for the improvement of aerobic capacity, and to improve some problems found by subject's test for an additional weight shoe. The subjects employed for this study were 10 college students. 4 video cameras, AMTI force platform and Pedar insole pressure distribution measurement device were used to analyze foot motions. The results of the study were as follows: 1 The initial achilles tendon angle and initial rearfoot pronation angle of an additional weight shoe during walking were 183.7 deg and 2.33 deg, respectively, and smaller than a barefoot condition. Maximum achilles tendon angle and the angular displacement of achilles tendon angle were 185.35 deg and 4.21 deg respectively, and smaller than barefoot condition. Thus rearfoot stability variables were within the permission value for safety. 2. Maximal anterior posterior ground reaction force of additional weight shoe was appeared to be 1.01-1.2 B.W., and was bigger than a barefoot condition. The time to MAPGRF of an additional weight shoe was longer than a barefoot condition. Maximal vertical ground reaction force of additional weight shoe was appeared to be 2.3-2.7 B.W., and was bigger than a barefoot condition in propulsive force region. But A barefoot condition was bigger in braking force region. The time to MVGRF of an additional weight shoe was longer than a barefoot condition. 3. Regional peak pressure was bigger in medial region than in lateral region in contrast to conventional running shoes. The instant of regional peak pressure was M1-M2-M7-M4-M6-M5 -M3, and differed form conventional running shoes. Regional Impulse was shown to be abnormal patterns. There were no evidences that an additional weight shoe would have function and safety problems through the analysis of rearfoot control and ground reaction force during walking. However, There appeared to have small problem in pressure distribution. It was considered that it would be possible to redesign the inner geometry. This study could not find out safety on human body and exercise effects because of short term research period. Therefore long term study on subject's test would be necessary in the future study.

• 마이크로전자및패키징학회지
• /
• 제31권1호
• /
• pp.43-48
• /
• 2024

SrTiO₃ (STO) 기판 위에 성장된 LaAlO₃ (LAO) 계면에서의 이차원 전자 가스 (2DEG)의 발견은 복합 산화물 이종 구조를 기반으로 한 혁신적인 전자소자 연구의 장을 제공함으로써 많은 관심을 받아왔다. 하지만 LAO 박막을 형성하기 위하여, 일반적으로 물리기상증착법(PVD)을 기반으로 하는 펄스 레이저 증착 (PLD) 등의 기법이 주로 사용되어 왔으나, 공정 비용이 많이 들며 LAO 내 La와 Al의 정밀한 조성 제어가 어려운 단점이 있다. 본 연구에서는 PVD에 비해 경제적인 대안인 용액 기반 공정을 사용하여 LAO 박막을 제조하였고, 그 전기적 특성을 평가하였다. LAO 전구체 용액의 농도를 다르게 하여 LAO의 두께를 2에서 65 nm까지 변화시켰으며, 각 두께에 따른 면저항 및 캐리어 농도를 도출하였다. 진공 열처리 후 형성된 전도성 채널의 면저항 값은 0.015에서 0.020 Ω·sq^-1 범위로 나타났으며, 이러한 결과는 기존 문헌과 비교하였을 때 LAO와 STO 사이의 계면에서의 전자 이동뿐만 아니라 계면으로부터 떨어져 있는 STO bulk 영역으로의 전자 전도를 시사한다. 본 연구 결과는 용액 기반 공정을 통한 2DEG 형성 및 제어를 구현한 것으로, 공정 비용을 줄이고 전자 소자 제조에서 보다 광범위한 응용 가능성을 제시한다는 점에 그 의의가 있다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.158-164
• /
• 1995

Solid solutions Sr$_{2}$(Ta$_{1-x}$ Nb$_{x}$)$_{2}$O$_{7}$, (x=0.0-1.0), composed of strontium tantalate(Tc=-107.deg. C) and strontium-niobate(Tc=1342.deg. C) were prepared by the conventional mixed oxide method and the flux method(molten salt synthesis method). Phase relation, sintering temperature, grain-orientation and dielectric properties for sintered ceramic samples were investigated with different compositions. Both Curie temperature and dielectric constant at Curie temperature were increased, and sintering behavior and the degree of grain-orientation were improved with the increase of Nb content. The single phase Sr$_{2}$(Ta/sib 1-x/Nb$_{x}$)$_{2}$O$_{7}$ powder was synthesized by using the flux method at lower temperatures, and sintering temperature was also reduced by using the flux method-derived powder than using the mixed oxide-derived powder. Sintering characteristics and dielectric properties of the specimens prepared by the flux method were better than those derived through the conventional mixed oxide method.thod.hod.