• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.6
• /
• pp.576-580
• /
• 2013

We investigate the enhanced effects of asymmetry ratio variations of the source and drain area in silicon (Si) field-effect transistor (FET). Photoresponse according to the variation of asymmetry difference between the width of source and drain are obtained by using the plasmonic terahertz (THz) wave detector simulation based on technology computer-aided design (TCAD) with the quasi-plasma 2DEG model. The simulation results demonstrate the potential of Si FETs with asymmetric source and drain structures as the promising plasmonic THz detectors.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.72.1-72.1
• /
• 2010

We present infrared and millimeter observations of the active star-forming complex W51. A $1.25\;deg\times1.00\;deg$ region that includes the W51 complex was covered in the J = 2 - 1 transition of the $^{12}CO$ and $^{13}CO$ molecules with the University of Arizona Heinrich Hertz Submillimeter Telescope. We use a statistical equilibrium code to estimate physical properties of the molecular gas. Using Spitzer data we identify young stellar objects (YSOs) and fit model spectral energy distributions to these sources and constrain their physical properties. We compare the molecular cloud morphology with the distribution of infrared and radio continuum sources and find associations between molecular clouds and YSOs. We estimate that about 1% of the cloud mass is currently in YSOs.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.391-399
• /
• 1992

The analysis of the evaporative heat transfer in the inclined porous layer (0.deg.<.theta.<90.deg.) is made by using capillary model. The length of the evaporation zone is obtained numerically by integrating the differential equation using a Runge-Kutta algorithm. As a result, the length of the evaporation zone is inverse proportional to the dimensionless number, E(=Re*.phi./cos.theta.) representing the evaporation intensity, and the relationship of these parameters shows linear in the log graph.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.680-688
• /
• 1996

In this paper, the unsteady state calculational model is proposed for the thermal stratification analysis in the feedwater line of the PWR plant. By defining dimensionless parameters in the two-dimensional polar coordinate system and applying SIMPLE algorithm, the temperature and flow profiles due to the thermal stratification are obtained. Base on the fact that the most significant condition occurs when the fluid temperature difference between the piping ends reaches as high as 166.deg. C, the present result shows that max. Dimensionless temperature difference of 0.6 (about l00.deg. C) obtained between hot and cold sections of pipe wall at dimensionless time 47.0.

• 전기의세계
• /
• v.26 no.1
• /
• pp.82-86
• /
• 1977

Semiconducting Barium Titanate shows resistivity anomaly near the transition temperature 120.deg. C. Its transition temperature decreases about 6-7.deg. C per 1 mole % SnO$_{2}$, which is likely to compose (BaSb) (TiSn) $O_{3}$ structure by making Sn$^{+4}$ ions occupy Ti$^{+4}$ ion sites. Grain boundories, whose existance is the cause of having high resistivity in Semiconducting BaTiO$_{3}$ disappear due to the spontaneous polarization below the transition temperature, and it is believed that the phase transition makes semiconducting BaTiO$_{3}$ have resistivity anomaly at certain temperature. Temperature and frequency dependencies of resistivity are also investigated for practical application.ion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.80-87
• /
• 1995

An experimental study of hot machining has performed to improve themachinability of Inconel 718. This experiment used plasma arc for heating materials and Whisker-reinforced aluminum oxide ceramic tool insert. An assembled plasma heating system are described and experimental results obtained from bothconventional and plasma hot machining of Iconel 718 are compared. Turning experiments with plasma heating demonstrated the following effectiveness. 1) The cutting force was reduced with increasing surface temperature of workpiece from 450 .deg. C up to 720 .deg. C as much as approximately from 20 to 40%. 2) Surface roughness(Ra) was improved by as much as a factor 2 in case of one pass cutting with new ceramic tool inserts. 3) The depth of cut notchwear at primarycutting tool was singificantly reduced.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.10
• /
• pp.821-827
• /
• 2003

Reduced-scale experimental study was carried out on the heat flow behavior which flows under the sloped ceiling in underground fire. Temperature and flow velocity were measured to characterize the ceiling jet along the sloped stairway ceiling. The methanol fuel was used as a model fire source giving 2.2 and 3.4 kW, with changing the slope angle of stairway adopting of 15, 25, 35, and 45 deg. Based on the experimental data, excess temperature and velocity along the sloped stairway ceiling were examined which are usefully applicable to estimate the activating conditions of heat detector and sprinkler head mounted on the sloped ceiling. Excess temperature in upper exit of the sloped stairway was also examined to analyze the soffit which delays the smoke diffusion. The result shows that the activating conditions of heat detector and sprinkler in the sloped stairway ceiling have to be considered differently in a point of about 30 deg.

• YAKHAK HOEJI
• /
• v.15 no.1
• /
• pp.24-31
• /
• 1971

Optimum reaction conditions for the preparation of extra-light magnesium carbonate from bittern by the reaction with sodium carbonate solution was found to be as follows: reaction temperature 33.deg. molar ratio(Mg$^{+2}/CO$^{2-}_{3}$)0.8, reaction time 14 minutes, drying temperature 99.deg. and bittern concentration 17%. While Korean pharmacopeia regulates the bulkiness above 12 mililiters per gm., our experimental result shows above 45 mililiters. Electron microscopic shapes were compared with products prepared under various reaction conditions, and it was found that there exists lighter the powder the more pillar crystalline, the heavier the powder the more amorphous and the intermediate was mixture of them.

• Cement
• /
• s.130
• /
• pp.26-34
• /
• 1993

For the purpose of increasing the quality of products and reducing the grinding cost of cement clinker, some aids were studied. Some of common grinding aids, such as Ethylene Glycol, Diethylene Glycol, Triethanolamine and so on, lead to the environmental

• YAKHAK HOEJI
• /
• v.2 no.1_2
• /
• pp.1-8
• /
• 1953

The leaves of prunus padus L. var. Seoulensis Nakai distributed widely in Korea, were extracted with boiling alcohol(95%) after being mixed with calcium carbonate. The aqueous solution distilled off alcohol from the above filtered extract under the reduced pressure was evaporated to the dryness. The residue was extracted with acetic ether on the water-bath and the acetic ether solution extract was allowed to stand for a weck after removing out of acetic ether almostly, then a colorless necdles were Crystalized out which has the following characteristics : $C_{14}$ $H_{17}$ $O_{6}$ N, began to melt at 138-139.deg. bitter taste [.alpha.]$_$ $D^{20}$ ]=-26.99.deg. soluble in water, alcohol acetone acetic ether etc. slightly soluble in chloroform. It was proved to be identical with prunasine due to above characteristics and determination of Benzal-dehyde HCN and glucose respectively which was obtained on hydrolysis of this glycoside with emulsine.