• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.3
• /
• pp.230-240
• /
• 2009

The ESCORT model is applied at Mokpo coastal zone to analyze the effect of fresh water discharge released from the gates of the Youngsan River sea-dyke. Applicability and validity of both 2-D and 3-D hydrodynamic modules could be guaranteed by simulating hydrodynamic feature with ebb dominance characteristics. Then, effects of the released discharge on the hydrodynamics are investigated. And analysis of the effects on diffusion phenomena show that 3-D model is essential for such diffusion modelling. Moreover, vertical salinity distributions near the gates are examined, and the influence range of fresh water is also estimated, which shows that dilution of fresh water is going on slowly because of poor flushing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.495-505
• /
• 2014

The retention basin is a river-facility for the flood mitigation by storing the river flow temporarily. The new 3 retention basins are installed in these regions YeoJu, NaJu, YoungWol by the Large River Management Project. In this study, 1D and 2D numerical flow simulation are conducted to evaluate the reduction effect of the peak flood stage for the YeoJu retention basin. HEC-RAS and FLDWAV models are used for 1D simulation with the option of retention basin. CCHE2D model is used for 2D simulation with the same hydrograph used in 1D simulation. It is verified that the peak flood stage is reduced very largely about 0.13 m near the overtopping section of the levee in 1D simulation. It is verified that the peak flood stage is reduced very largely about 0.20 m at the upstream-end of the simulated reach in 2D simulation. 2D simulation for the retention basin is more reasonable because physical characteristics of topography in the model, and also more advantageous for the evaluation of the flow characteristics of the in- and outside of the retention basin on the results of simulation of this study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.184-193
• /
• 2008

The gate expansion was planed to increase discharge capacity of gate structure at sea dike in Asan Bay. So it was estimated for changing of hydraulic states in Pyeongteak Harbor Zone caused by gate expansion, using Delft3D, FLOW-3D and hydraulic physical scale model testing. In result, the influence of gate expansion was indicated to be weak.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.69-77
• /
• 2022

The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.385-394
• /
• 2011

In this study, optimal parameters of diffusion-analogy GIUH were calculated by separating channel and hillslope from drainage structures in the basin. Parameters of the model were composed of channel and hillslope, each velocity($u_c$, $u_h$) and diffusion coefficient($D_c$, $D_h$). Tanbu subwatershed in Bocheong river basin as a target basin was classified as 4th rivers by Strahler's ordering scheme. The optimization technique was applied to the SCE-UA, the estimated optimal parameters are as follows. $u_c$ : 0.589 m/s, $u_h$ : 0.021 m/s, $D_c$ : $34.469m^2/s$, $D_h$ : $0.1333m^2/s$. As a verification for the estimated parameters, the error of average peak flow was about 11 % and the error of peaktime was 0.3 hr. By examining the variability of parameters, the channel diffusion coefficient didn't have significant effect on hydrological response function. by considering these results, the model is expected to be simplified in the future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.126-126
• /
• 2023

최근 대한민국에서는 기후변화로 전국 각지에서 돌발성 호우와 태풍의 강도 및 발생빈도가 높아지고 있다. 이에 따라 주요 국가시설이 위치한 해안 도시의 2차원 3차원 모형을 통해 극한 조건하 침수 분석을 수행하였다. 먼저 해양수산부 "2019년 전국 심해설계파 보고서"를 기반으로 극치분포 중 Weibull 분포를 이용하여 극한 조건, 1,000년부터 1,000,000년 빈도의 재현기간의 파도 높이와 풍속을 계산하였다. 계산 결과를 SWAN(Simulating WAves Nearshore)의 입력값으로 해상에서 100m 간격의 파고 높이를 계산하였다. 이때 100m 간격으로는 방파제 지형을 정확히 해석하지 못하였기에, 상세파고 계산을 위한 Nesting 기법을 이용하여 20m 간격의 파고 결과를 도출하였고, 해안 도시 인근 해상에서 10.916m의 파고를 예측하였다. 또한, 예측된 파고를 이용해 EurOtop(2018) 매뉴얼의 경험식을 기반으로 연구 유역으로 유입되는 월류량 계산에 사용하였다. 결과로 16방위 중 SSE 방향, 1,000,000년 빈도 재현기간 조건에서 0.0306cms/m의 월파량을 예측했다. 예측된 자료를 바탕으로 2차원 침수해석은 FLO-2D 모형, 3차원 침수해석은 FLOW-3D 모형을 이용하였다. 2차원 침수해석 결과 주요 지점에서 0.18~0.33m의 침수가 예상되었고 3차원 침수해석 결과 동일한 지점에서 0.240~0.333m의 침수가 예상되었다. 모의 결과 2차원과 3차원 모형 간 침수 예측 결과가 0.3cm에서 6.1cm의 차이를 나타내어 모형 구축이 합리적으로 이뤄졌다고 판단하였으며 연구 유역에서는 침수가 예상된다는 결과를 도출하였다. 본 연구를 통해 기후변화에 따른 해안에 위치한 주요 도시지역과 국가 주요 시설물에 대한 침수해석을 실시하였고 분석결과를 생명과 재산을 보호하기 위한 대피계획 등 재난예방대책 수립에 활용할 수 있음으로 예상된다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.337-344
• /
• 2007

In recent years, there has been rapid progress in different areas of vision science, such as refractive surgical procedures, contact lenses and spectacles, and near vision. This progress requires a highly accurate modeling of optical performance of the human eyes in different accommodation states. A new novel model-eye was designed using the Navarro accommodation-dependent finite model eye. For each of the vergence distances, ocular wavefront error, accommodative response, and visual acuity were calculated. Using the new model eye ocular wavefront error, accommodation dative response, and visual acuity are calculated for six vergence stimuli, -0.17D, 1D, 2D, 3D, 4D and -5D. Also, $3^{rd}\;and\;4^{th}$ order aberrations, modulation transfer function, and visual acuity of the accommodation-dependent model eye were analyzed. These results are well-matched to anatomical, biometric, and optical realities. Our corrected accommodation-dependent model-eye may provide a more accurate way to evaluate optical transfer functions and optical performances of the human eye.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.68-68
• /
• 2016

하천의 사행 및 합류 형상은 복잡한 나선 흐름을 발생시킨다. 그 중 이차류는 사행에 의한 편수위 형성과 횡단 압력의 불균형, 그리고 수심에 따라서 변화하는 원심력에 의하여 형성된다. 이러한 흐름은 주로 3차원 모형으로 재현할 수 있으며 이에 관련된 연구는 계속 이루어졌으나 3차원 모형의 구성과 사용에는 상당한 시간 및 노력이 요구된다. 본 연구에서는 이러한 이차류의 영향을 수심적분된 2차원 모형으로 구현하고자 하였으며 이를 위해 이차류 연직 분포에 대한 기존 연구를 확인하고, 이러한 연직 분포를 표현할 수 있는 경험식을 3차원 모형인 FLOW3D를 통해 모의하고 개발하였다. 3차원 모형을 다양한 사행반경을 갖는 실험 사행수로에 적용하여 사행도에 따른 민감도를 분석하고 경험식을 개발하였다. 개발된 식은 2차원 수리해석 모형인 RAMS(River Analysis and Modeling System)에 적용되었다. RAMS는 수심 적분된 2차원 천수 방정식을 지배방정식으로 사용하는 수리해석모형인 HDM-2D를 해석엔진으로 사용하며, 이차류의 영향을 반영하기 위하여 개발한 수직분포 경험식을 분산 응력항 형태로 적용하였다. 모형의 적용성 확인을 위하여 사행 실험수로 및 합류수로에 모의를 수행하였다. 사행수로 및 합류수로는 실험 경계조건과 동일한 상류 입력 유량과 하류 경계조건을 사용하여 결과를 비교하였다. 사행수로 모의 결과 유속분포의 거동이 실험수로의 사행으로 인하여 2차류 효과로 주 흐름이 바깥쪽으로 기울어짐을 일부 재현하였다. 합류수로의 경우 기존 모형에 비하여 분산 응력항이 포함된 본 모형이 실측값에 근접하였는데 이는 이차류가 발생하는 영향으로 하류에 유속편차가 줄어드는 영향을 더 정확히 묘사한 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.557-562
• /
• 2006

In order to predict the dispersion of suspended sediment arising from dredging operation in port and navigation channel, a hybrid model for dispersive transport of turbidity plume was developed using Lee's(1998) hybrid method. Using hybrid modeling scheme advection-diffusion equation was solved by the forward particle-tracking method for advection process and by the fixed Eulerian grid method for diffusion process. To examine numerical model simulation in accuracy, the simulated results for 1-D, 2-D, and 3-D cases were compared with the analytical solutions including Kuo, et al's (1985) 3-D mathematical model. The model results were in a good agreement with the analytical solutions and mathematical model for the dispersion of turbidity plume.

• Spatial Information Research
• /
• v.20 no.4
• /
• pp.1-16
• /
• 2012

There is no doubt that the urban heat island (UHI) is a mounting problem in built-up environments, due to energy retention by the surface materials of dense buildings, leading to increased temperatures, air pollution, and energy consumption. To investigate the UHI, three-dimensional (3-D) information is necessary to analyze complex sites, including dense building clusters. In this research, 3-D building geometry information is combined with two-dimensional (2-D) urban surface information to examine the relationship between urban characteristics and temperature. In addition, this research introduces spatial regression models to account for the spatial spillover effects of urban temperatures, and includes the following steps: (a) estimating urban temperatures, (b) developing a 3-D city model, (c) generating urban parameters, and (d) conducting statistical analyses using both Ordinary Least-Squares (OLS) and Spatial Regression Models. The results demonstrate that 3-D urban characteristics greatly affect temperatures and that neighborhood effects are critical in explaining temperature variations. Finally, the implications of the results are discussed, providing guidelines for policies to reduce the UHI.