• Corrosion Science and Technology
• /
• v.22 no.6
• /
• pp.447-456
• /
• 2023

In this work, we performed a comparative study examining two coatings on Ti Gr.1 for use in fuel cell bipolar plates. The coatings consisted of carbon black as the conductor along with acrylic polymer and Ti Sol-Gel binder as the binder. Ti Sol-Gel that had precipitated as TiO₂ in areas impregnated between carbon black gaps, thereby acting as a binder for carbon black and serving as a polymer coating. Neither of the coatings peeled off during the 90° bend test to check formability. The contact resistance of the TiO₂ coating was found to be lower than that of the polymer binder coating. Moreover, due to coating shrinkage (denser) that occurred during the heat treatment process, the TiO₂ binder coating showed almost the same level of corrosion resistance, as measured by potentiostatic and EIS tests, despite being thinner than the polymer coating. However, both the polymer binder coating and the TiO₂ binder coating had many pores and irregularities internally (around 10 ~ 100 nm) and on the surface (0.1 ~ 2 ㎛). We considered that these pores and irregularities contributed to the lower corrosion resistance.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.164-172
• /
• 1989

The formation of galactooligosaccharides by transgalactosidation reactions during hydrolysis of lactose by the ${\beta}-galactosidase$ from Streptococcus thermophilus 510 was investigated. Three oligosaccharides were detected during hydrolysis. It was found that the optimum conditions for the production of oligosaccharides was 40% lactose treated with ${\beta}-galactosidase(50\;ONPG\;units/ml)$ at $37^{\circ}C$ for 4 hours. The oligosaccharides formed accounted for 30% of the total sugars when the lactose had been 94% hydrolysed. 69% of the oligosaccharides were identified as $6-o-{\beta}-D-galactopyranosyl-D-glucose(allolactose)$ and 23% as $6-o-{\beta}-D-galactopyranosyl-D-galactose(isogalactobiose)$. The separation of galactooligosaccharides by the use of Bio-Gel P-2 gel permeation chromatography was also studied.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1992.11a
• /
• pp.59-62
• /
• 1992

In this study, $TiO_2$ thin films are fabricated by Sol-Gel method and dielectric, electric and humidity sensing properties have been investigated. The structure of Sol can be changed by controlling for hydrolysis reaction condition. The uniformity of the surface on $TiO_2$ thin films is confirmed by SEM. The permittivity of $TiO_2$ thin films increases according to heat treatment temperature, whereas the conductivity of $TiO_2$ thin films decreases according to heat treatment temperature, As the results of measuring humidity sensing properties of $TiO_2$ thin films fabricated as humidity sensor, it is confirmed to have good humidity sensing properties in high humidity and low frequency.

• Genomics & Informatics
• /
• v.9 no.4
• /
• pp.197-199
• /
• 2011

The biological interpretation of two-dimensional (2D) gel electrophoresis experiments is a key step toward understanding the functions of biological systems. We here present a web-based integrated database, called 2DSpotDB, for the management of proteome data derived from several pathogens. The 2DSpotDB was established as a part of the management of a pathogen proteome project at the Korea National Institute of Health. The goals of the 2DSpotDB implementation are to store and define important pathogen genes, retrieve information obtained by 2D polyacrylamide gel electrophoresis and mass spectrometry, and create an integrated system to provide pathogen proteome information for biological scientists. This database currently contains 14 gels and information on 387 protein spots, among which 329 proteins were identified and annotated.

• Journal of Microbiology
• /
• v.44 no.4
• /
• pp.369-374
• /
• 2006

To investigate the mechanism of salt tolerance of gram-positive moderately halophilic bacteria, two-dimensional gel electrophoresis (2-D PAGE) was employed to achieve high resolution maps of proteins of Halobacillus dabanensis $D-8^T$. Approximately 700 spots of proteins were identified from these 2-D PAGE maps. The majority of these proteins had molecular weights between 17.5 and 66 kDa, and most of them were distributed between the isoelectric points (pI) 4.0 and 5.9. Some protein spots were distributed in the more acidic region of the 2-D gel (pI <4.0). This pattern indicated that a number of proteins in the strain $D-8^T$ are acidic. To understand the adaptation mechanisms of moderately halophilic bacteria in response to sudden environmental changes, differential protein profiles of this strain were investigated by 2-D PAGE and $Imagemaster^{TM}$ 2D Platinum software after the cells were subjected to salt shock of 1 to 25% salinity for 5 and 50 min. Analysis showed 59 proteins with an altered level of expression as the result of the exposure to salt shock. Eighteen proteins had increased expression, S proteins were induced, and the expression of 33 proteins was down-regulated. Eight of the up-regulated proteins were identified using MALDI-TOF/MS and MASCOT, and were similar to proteins involved in signal transduction, proteins participating in energy metabolism pathways and proteins involved in stress.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.425-433
• /
• 2014

In this study, microstructure and gel content (C-C) of polybutadiene rubber (PBR) were investigated using various techniques including ASTM D 3616, attenuated total reflectance Fourier transform infrared spectrometry (ATR FTIR), differential scanning calorimetry (DSC) and nuclear magnetic resonance spectroscopy (NMR). The ATR FTIR spectra of the samples were investigated to determine the cis, trans, 1, 2-vinyl and the C-C gel content in PBR. The absorbance ratios of specific peaks in different grades of PBR were correlated with the C-C gel content measured by the ATR FTIR techniques. Physico-mechanical and rheological properties of rubber compounds based on BR with various amounts of gel were determined. The results showed that there is an acceptable correlation between these properties and the C-C gel content of PBR.

• Journal of Applied Biological Chemistry
• /
• v.64 no.4
• /
• pp.343-349
• /
• 2021

The rhizomes of Cnidium officinalis were extracted in aqueous MeOH, and the concentrate was fractionated via systematic solvent fractionation to EtOAc, n-BuOH, and aqueous fractions. The repeated column chromatography of EtOAc and n-BuOH fractions using silica gel, octadecyl silica gel, and Sephadex LH-20 as stationary phase to afford five lipids. They were identified to be methyl linoleate (1), linoleic aicd (2) 6-linoleoyl-𝛼-D-glucopyranosyl 𝛽-D-fructofuranoside (3), 1-linolenoyl-3-(𝛼-D-galactopyranosyl (1→6)-𝛽-D-galactopyranosyl) glycerol (4), and 1-linoleoyl-3-(𝛼-D-galactopyranosyl (1→6)-𝛽-D-galactopyranosyl) glycerol (5) on the basis of spectroscopic data such as IR, MS, and Nuclear magnetic resonance (NMR). Compounds 1 and 3-5 were isolated for the first time from this plant in this study. The NMR data of fatty acids 1 and 2 reported in literatures are different each other. Authors identified the NMR data without ambiguity. Compound 3, a conjugate of sucrose and fatty acid, and compounds 4 and 5, digalactosyl monoglyceride, are very rarely occurred in natural source. Through the immune enhancement and anticancer activity of the reported lipid compounds, the potential as various pharmacologically active materials of Cnidium officinalis rhizome can be expected.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.36-40
• /
• 2003

We have grown D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ (x = 0.5,1.0, 1.5,2.0) magnetic garnet thin films upon $Al_2$O3i and GGG substrate using Pechini process. The annealing temperature to get single phase D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ garnet is dependent on substrate, i.e. the annealing temperature for GGG substrate il 5$0^{\circ}C$ lower than that for $Al_2$ $O_3$ substrate. The grains of garnet thin film grown on GGG (111) plane align along [111] direction, and in this case the hysteresis curve does not saturate up to H : 5000 Oe. We attribute this phenomenon to rotation magnetization process. The maximum amount of Bi substitution in polycrystalline D $y_{x}$B $i_{3-x}$F $e_{5}$ $O_{12}$ thin film prepared by Pechini process is restricted to 2.0 Bi atom/unit cell, and this value is less than that in single garnet crystall grown by LPE method.own by LPE method.ethod.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Journal of Life Science
• /
• v.12 no.2
• /
• pp.208-212
• /
• 2002

Human $\varepsilon$-globin DNA fragment was used to determine the thermal stabilities of base pairs at d(CXG) and d(GXC) by Temperature Gradient Gel Electrophoresis(TGGE). The base pair stability depends on the hydrogen bonding interaction and base stacking interaction of neighbor base sequence. The orders of base pair stabilities were T.AG.A = A.G>C.T>T.C>C.A>A.C for d(GXC).d(GYC).