• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.9
• /
• pp.991-999
• /
• 2013

Lower limbs deformity is a congenital disease and can also be occurred by an acquired factor. This paper suggests a new technique for surgical planning of Corrective Osteotomy for Lower Limbs (COLL) using 2D-3D medical image registration. Converting to a 3D modeling data of lower limb based on CT (computed tomography) scan, and divide it into femur, tibia and fibula; which composing the lower limb. By rearranging the model based on the biplane 2D images of X-ray data, a 3D upright bone structure was acquired. There are two ways to array the 3D data on the 2D image: Intensity-based registration and feature-based registration. Even though registering Intensity-based method takes more time, this method will provide more precise results, and will improve the accuracy of surgical planning.

• Journal of KIISE:Software and Applications
• /
• v.33 no.3
• /
• pp.335-343
• /
• 2006

This paper proposes a novel technique of marker-based 2D-3D registration to combine 3D information obtained from preoperative CT images into 2D image obtained from intraoperative x-ray fluoroscopy image. Our method is divided into preoperative and intraoperative procedures. In preoperative procedure, we generate CT-derived DRRs using graphics hardware and detect markers automatically. In intraoperative procedure, we propose a hierarchical two- step registration to reduce a degree of freedom from 6-DOP to 2-DOF which is composed of in-plane registration using principal axis method and out-plane registration using minimal error searching method in spherical coordinate. For experimentation, we use cardiac phantom datasets with confirmation markers and evaluate our method in the aspects of visual inspection, accuracy and processing time. As experimental results, our method keeps accuracy and aligns very fast by reducing real-time computations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.129-136
• /
• 2005

The usage of the land is enlarged with above-surface space and sub-surface space as well as surface, as the concern about the land use is increased because there are many factors like the recent development of the science technique, Rapid increase of the population, Rapid city's diffusion, industrialization. According to the cubicalness of the land usage such as these, We have the limit to register the right-objects in space like various buildings and facilities by present registration method of 2D cadastre registration because of 2D registration object. Thus, it is necessary for plan to register an ownership, other privilege relations and the physical objects like various buildings and facilities established on both surface and space. There are two steps in this study. First step is the necessity of 3D cadastre registration and object analysis of cadastre registration, second step is 3D cadastre division and its visualization. Finally, this study will present the realizable model for a 3D cadastre registration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1475-1476
• /
• 2011

• Journal of Digital Contents Society
• /
• v.15 no.4
• /
• pp.521-526
• /
• 2014

The purpose of this study is to propose the efficient method of 3D data registration. Three-dimensional data including the two-dimensional image acquisition apparatus and the position information are acquired at an arbitrary angle with each other. This paper proposes the more accurate and faster matching method by using this information. Four image points founded from 2D images match the volumetric size of the model and compute the homography of the axis for registration between two 3D data sets. The advantages of the proposed algorithm are the repeating process is unnecessary and the process time is faster than prvious method.

• Journal of Korea Multimedia Society
• /
• v.16 no.12
• /
• pp.1454-1464
• /
• 2013

In this paper, we propose a rapid rigid registration method for the fusion visualization of intra-operative 2D XA and pre-operative 3D CTA images. In this paper, we propose a global movement estimation based on a trilateration for the fast and robust initial registration. In addition, the principal axis of each image is generated and aligned, and the bounding box of the vascular shape is compared for more accurate initial registration. For the fine registration, two images are registered where the distance between two vascular structures is minimized by selective distance measure. In the experiment, we evaluate a speed, accuracy and robustness using five patients' data by comparing the previous registration method. Our proposed method shows that two volumes can be registered at optimal location rapidly, and robustly comparing with the previous method.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.285-292
• /
• 2000

A new method for the 3D automatic registration of the multiple range images has been developed for the 3D scanners(non-contact coordinates measurement systems). In the existing methods, the user usually has to input more than 3 pairs of corresponding points for the iterative registration process. The major difficulty of the existing systems lies in that the input corresponding points must be selected very carefully because the optimal searching process and the registration results mostly depend upon the accuracy of the selected points. In the proposed method, this kind of difficulty is greatly mitigated even though it needs only 2 pairs of the corresponding input points. Several registration examples on the 3D measured data have been presented and discussed with the introduction to the proposed algorithm.

• Journal of Computing Science and Engineering
• /
• v.4 no.4
• /
• pp.368-387
• /
• 2010

We propose a novel method for the registration of 3D CT scans to 2D endoscopic images during the image-guided medialization laryngoplasty. This study aims to allow the surgeon to find the precise configuration of the implant and place it into the desired location by employing accurate registration methods of the 3D CT data to intra-operative patient and interactive visualization tools for the registered images. In this study, the proposed registration methods enable the surgeon to compare the outcome of the procedure to the pre-planned shape by matching the vocal folds in the CT rendered images to the endoscopic images. The 3D image fusion provides an interactive and intuitive guidance for surgeon by visualizing a combined and correlated relationship of the multiple imaging modalities. The 3D Magic Lens helps to effectively visualize laryngeal anatomical structures by applying different transparencies and transfer functions to the region of interest. The preliminary results of the study demonstrated that the proposed method can be readily extended for image-guided surgery of real patients.

• Journal of KIBIM
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2021

Comparing to general scanning data, the 3D digital map for large construction sites and complex buildings consists of millions of points. The large construction site needs to be scanned multiple times by drone photogrammetry or terrestrial laser scanner (TLS) survey. The scanned point cloud data are required to be registrated with high resolution and high point density. Unlike the registration of 2D data, the matrix of translation and rotation are used for registration of 3D point cloud data. Archiving high accuracy with 3D point cloud data is not easy due to 3D Cartesian coordinate system. Therefore, in this study, iterative closest point (ICP) registration method for improve accuracy of 3D digital map was employed by different overlap ratio on 3D digital maps. This study conducted the accuracy test using different overlap ratios of two digital maps from 10% to 100%. The results of the accuracy test presented the optimal overlap ratios for an ICP registration method on digital maps.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.192-205
• /
• 2011

This study analyzed the registration of patent and utility models by fashion firms in Korea. A total of 2,291 registration cases of IPC A41B-H from the period of 1996 to 2009 were collected by KIPRIS of the Korean Intellectual Property Organization (KIPO). All cases were analyzed by year to review the longitudinal trend and 481 cases of IPC A41B (shirts, underwear, baby linen, and handkerchiefs) and 1088 cases of IPC A41D (outerwear, protective garments, and accessories) were analyzed by content (provided benefit type and developing method), by detailed product items and the characteristics of the applicant. The results of this study were as follows: 1) Registration of IPC 41 increased steeply by the year (especially since 2006) and the patent registrations increased more than those in the utility model. 2) Analyzing the application content of A41B on the basis of benefit showed that 75% were to provide new functions and the rest were for health. In terms of the developing method, 83% of benefit provided by the application were by design development, 11.2% were by material, and the rest was by process, In the cases of IPC A41D, 23.6% were for safety and protection. In terms of the developing method, the process and material development were more frequently adopted than in the cases of A41B. 3) The major product types of A41B were socks, underwear, and infant wear, whereas gloves and parts of clothing were major items in A41D. 4) In terms of the characteristics of the applicant, registration by firms was greater for patents than for utility models and registration by foreigners increased in 2006 due to the complete opening of the retail market. 5) Fifteen universities registered for a total 57 cases and major applications were for IT related clothing or high-tech protective items.