• 한국생활과학회지
• /
• 제21권5호
• /
• pp.975-988
• /
• 2012

Although the pattern development for tight-fitting clothing has been carried out using 3D data on humans, the pattern development using 3D scan data obtained for various postures still remains an interesting subject. In this study, we have developed the 2D pattern using the 3D human body reflecting standing and cycling postures. The 3D scan data of a subject was obtained using Cyberware. 2C-AN program(Triangle simplification and the Runge-Kutta method) was used in the system to reduce the 3D scan data points and to make segmented triangular patches in a plane from 3D data. As results, surface distance and area of each body part of standing and cycling postures were also provided for the future application of the functional clothing construction. The area of center piece on the front (c.front) decreased by $106.45cm^2$(-13.08%) and that of lateral piece(s.back) on the back increased by $144.96cm^2$(18.69%) in the patterns of cycling posture. The girth of neck and waist for the cycling posture increased by 0.88cm (3.92%) and 1.56cm(4.40%) respectively, and the that of thigh decreased by 1.01cm(-2.24%). The differences between the area in the 2D pattern obtained from the 3D scan data and that in the 3D scan surface data for standing and cycling postures were very small($-10.34cm^2$(-0.32%) and $-44.33cm^2$(-1.32%)).

• 한국BIM학회 논문집
• /
• 제9권2호
• /
• pp.21-28
• /
• 2019

Recently, many scan projects are gradually increasing for maintenance, construction. The scan data contains useful data, which can be generated in the target application from the facility, space. However, modeling the scan data required for the application requires a lot of cost. In example, the converting 3D point cloud obtained from scan data into 3D object is a time-consuming task, and the modeling task is still very manual. This research proposes Scan-to-Geometry Mapping Rule Definition (S2G-MD) which maps point cloud data to geometry for irregular building plane objects. The S2G-MD considers user use case variability. The method to define rules for mapping scan to geometry is proposed. This research supports the reverse engineering semi-automatic process for the building planar geometry from the user perspective.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.227-232
• /
• 2016

3D 인체형상자료는 인체 적합성이 우수한 제품과 생활공간을 만들기 위해 다양한 분야에서 활용되고 있다. 본 연구는 한국인 인체치수조사 보급사업에서 2013년에 수집한 청소년층 3차원 측정 자료를 기반으로 한국 청소년의 대표 인체치수를 산출하고 대표 인체치수와 가까운 3D 인체형상자료를 선별하는 방법을 제공한다. 먼저 여러 측정항목으로 이루어진 다차원 벡터공간을 요인분석을 통해 둘레성분과 길이성분의 2차원 벡터공간으로 투영하였다. 다음으로 2차원 성분공간에서 마할라노비스 거리를 이용하여 대표 인체치수와 이에 가까운 3D 인체형상자료를 선별하였다. 2차원 성분공간에 나타난 청소년기의 성장패턴을 고려하여 남자는 4개의 연령그룹으로 여자는 3개의 연령그룹으로 구분하였다. 성분점수 계수행렬의 열벡터에 대응하는 고유형상을 이용하여 남자는 13개 측정항목, 여자는 14개 측정항목에 대한 대표 인체치수를 연령그룹별로 계산하였다. 여기서 구한 대표 인체치수와 3D 인체형상자료는 3차원 대표 형상을 만드는 데에 매우 유용하다.

• 대한가정학회지
• /
• 제46권9호
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

• 한국의류학회지
• /
• 제30권1호
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• 대한인간공학회지
• /
• 제33권4호
• /
• pp.299-311
• /
• 2014

Objective: The aim of this study was to develop a method for measuring breast size from three-dimensional (3D) body scan image data. Background: Previous bra studies established reference points by directly contacting the subject's naked skin to determine the boundary of the breast. But some subjects were uncomfortable with these types of measurements. This study examined noncontact methods of extracting breast reference points from 3D body scan data that were collected while subjects were wearing standardized soft bras. Method: 3D body scan data of 32 Korean women were analyzed. The subjects were selected from the Size Korea 2010 study. The breast landmarks were identified by graphic analyses of slicing contour lines on 3D body scan data. Results: Three methods determining bra cup size were compared. The M1 and M2 methods determined cup size by calculating the difference between bust girth and under-bust girth. The M3 method determined bra cup size by measuring breast arc length. Conclusion: The researchers proposed an anthropometric bra cup sizing system with the breast arc length (M3 method). It was measured from the geometrically defined landmarks on the 3D body scan slicing contour lines. The new bra cup size was highly correlated with breast depth. Application: The noncontact measuring method used in this study can be applied to the ergonomic studies measuring sensitive body parts.

• 패션비즈니스
• /
• 제11권3호
• /
• pp.35-45
• /
• 2007

This study examined how to create 2D basic pattern of individuals by means of 3-D body figure, which is to develop a flat of individual basic pattern directly from the 3-D body scan data of each subject using that of the upper body of a male adult. In terms of methodology, this study adopted 3D body scan data on system and body to make examinations in the following steps: 1. Standard point and line were set on human body, along with 3-D definition points(feature points). 2. PB was created by modifying horizontal and longitudinal section of scan data. 3. Ways to set reserve were established in the findings of PB planar development. Respective developed flat patterns were compared with pattern findings in previous studies by means of sensory evaluation. As a result, it was found that both system and body model are basic pattern and belong to appropriate pattern as semi-tight-fit basic pattern with overall appropriate tolerances. Thus, this study came to a conclusion that it is feasible and valid to develop theories for flat development as considered herein.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.354-363
• /
• 2010

The purpose of this study was to provide some preliminary results on application of 3D scan data of head shapes to the hat design and pattern-making. This paper defined necessary measurement items and concepts in 3-dimensional images of head shapes. And also it presented the methodology to pattern-making of 6-piece crown hat based on 3D data. It used the data of Size Korea to pick up and choose a head shape model with the average head size of Korean women in their twenties. Main results were: 1. The 3D scan data of head shape was better than the 1 dimensional measurement data. Because I could establish a hat pattern-making theory by the 3D scan data of head. 2. The 3D scan data provided the basis for conceptualization of basic measurement points and items for a better fit of hats as well as the definition of the basic hat circumference. 3. This presented a methodology for analyzing out head shape by 3D scan data, and allowed the derivation of the basic hat circumference from the maximum head circumference. 4. As the 6-piece Crown cloche hat made by this method fitted the head shape model perfectly, this methodology could suggest potential applicability to various hat design.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.