• 생명과학회지
• /
• 제17권5호
• /
• pp.625-633
• /
• 2007

알긴산분해효소(EC 4. 2. 2. 3)를 균체외로 생산하는 새로운 방선균을 전라남도 완도의 연안토양으로부터 분리하고 이 균주를 Streptomyces sp. MET 0515라 명명하였다. 이 균주가 생산하는 균체외 알긴산분해효소를 아세톤 침전, 음이온 교환 크로마토그래피(Q-Sepharose and DEAE-Sepharose), 젤 크로마토그래피(Sephacryl S-200 HR gel filtration chromatography)를 이용하여 정제하였다. 이 효소의 최적 활성 온도과 pH는 각각 $70^{\circ}C$와 pH 7.5이고, 온도 안정성은 $0-50^{\circ}C$, pH 안정성은 pH 6.0-9.0였다. 이 효소는 $Mn^{2+}$ 이온 첨가시에는 활성이 증가하였으며 1mM $Fe^{3+}$, 1mM EDTA, 1mM $Zn^{2+}$ 이온 첨가시에는 활성이 억제되었다. 또한 이 효소는 poly-alpha 1,4-L-guluronate와 poly-beta 1,4-D-mannuronate두 종류의 기질에 대하여 활성을 나타냈다. 따라서 본 효소는 다른 미생물 기원의 효소와 비교해 볼 때 Streptomyces sp.가 생산하는 첫번째 효소로 인정되었다.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.279-286
• /
• 2014

목적: 임플란트가 식립되는 동적과정을 유한요소해석으로 모사하여, 임플란트 나사형상 차이가 변연골의 식립 응력발생에 미치는 영향을 조사하고자 한다. 재료 및 방법: 코어직경 3.5 mm, 매식부 길이 10 mm인 Straumann 임플란트 몸체 외형에 서로 다른 4종의 나사산이 부여된 가상의 임플란트 모델 4개를 CAD 프로그램을 이용하여 각각 제작하였다. 4종 나사산은 buttress 형, v-자 형, reverse buttress 형, square 형이며, 나사산의 높이와 피치는 0.3 mm와 1.0 mm로 모두 동일하다. 각 임플란트가 3.8 mm pilot hole을 갖는, 1.2 mm 두께 치밀골에 식립되는 과정을 $DEFORM^{TM}$ 3D (ver. 6, SFTC, Columbus, OH, USA) 프로그램을 사용하여 모사/해석하였으며, 식립이 진행되는 과정에 인접골에 생성/누적되는 응력(식립응력)을 비교 분석하였다. 결과: 임플란트 식립 초기, 그 하단부가 pilot hole 내로 진입하며 나사산이 골벽을 압박/변형시키는 단계에서 식립 토오크와 응력이 급격히 발생하였으며 그 이후에 토오크와 응력이 모두 감소하는 변화를 보였다. 식립 응력은 임플란트 나사산 형상에 따라 현저한 차이가 있었으며, v-자형 나사산 경우가 가장 낮았고, square 형의 경우가 가장 높았다. 나사산 차이가 인접골 응력에 미치는 영향은 나사산 첨부 보다는 기저부에 인접한 위치에서 더 현저하였다. 결론: 임플란트 식립응력을 낮추어 골융합에 유리한 환경을 조성하는데는 나사산 첨부가 상대적으로 날카로운 v-자형 나사산이 유리하다.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.780-806
• /
• 1995

The purpose of this study was to describe the application of 3D finite element analysis to determine resultant stresses on the bone anchored fixed prosthesis, implants and supporting bone of the mandible according to fixture numbers and load conditions. 4 or 6 fixtures and the bone anchored fixed prosthesis were placed in 3D finite element mandibular arch model which represents an actual mandibular skull. A $45^{\circ}$ diagonal load of 10㎏ was labiolingually applied in the center of the prosthesis(P1). A $45^{\circ}$ diagonal load of 20㎏ was buccolingually applied at the location of the 10mm or 20mm cantilever posterior to the most distal implant(P2 or P3). The vertical distribution loads were applied to the superior surfaces of both the right and the left 20mm cantilevers(P4). In order that the boundary conditions of the structure were located to the mandibular ramus and angle, the distal bone plane was to totally fixed to prevent rigid body motion of the entire model. 3D finite element analysis was perfomed for stress distribution and deflection on implants and supporting bone using commercial software(ABAQUS program. for Sun-SPARC Workstation. The results were as follows : 1. In all conditions of load, the hightest tensile stresses were observed at the metal lates of prostheses. 2. The higher tensile stresses were observed at the diagonal loads rather than the vertical loads 3. 6-implants cases were more stable than 4-implants cases for decreasing bending and torque under diagonal load on the anterior of prosthesis. 4. From a biomechanical perspective, high stress developed at the metal plate of cantilever-to-the most distal implant junctions as a consequence of loads applied to the cantilever extension. 5. Under diagonal load on cantilever extension, the 6-implants cases had a tendency to reduce displacement and to increase the reaction force of supporting point due to increasing the bendign stiffness of the prosthesis than 4-implants cases. 6. Under diagonal load on cantilever extension, the case of 10mm long cantilever was more stable than that of 20mm long cnatilever in respect of stress distribution and displacement. 7. When the ends of 10mm or 20mm long cantilever were loaded, the higher tensile stress was observed at the second most distal implant rather than the first most distal implant. 8. The 6-implants cases were more favorable about prevention of screw loosening under repeated loadings because 6-implants cases had smaller deformation and 4-implants cases had larger deformation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권6호
• /
• pp.453-457
• /
• 2016

발전 플랜트, 석유 화학 플랜트, 단위 공장과 같은 다양한 산업 플랜트에서, 사용 후 스팀이나 잉여 스팀을 이용하여 온수나 급탕수를 만드는 시스템의 수요가 증가하고 있다. 스팀을 사용하여 온수를 제조하는 장치인 컴팩트 스팀 유닛(Compact Steam Unit, 이하 CSU)가 에너지 재활용 측면에서 좋은 대안이 되고 있다. 본 연구에서는 고압 CSU 개발을 위한 기초 연구로서, CSU의 핵심 부품인 열교환기로 기존 판형 열교환기 대신 하이브리드 열교환기를 적용하여 위해, 실험적인 방법으로 하이브리드 열교환기의 전열 특성을 파악하고자 하였다. 실험 결과, 온수측과 냉수측 사이의 열 평형은 ${\pm}5%$ 이내를 만족하였다. 레이놀즈 수가 증가함에 따라, 총괄 열전달 계수는 선형적으로 증가하였으며, 채널 유속 0.5 m/s 이상에서 총괄 열전달 계수는 개발 목표치인 $5,524W/m^2K$를 초과하였다. 레이놀즈 수가 증가함에 따라, 압력 강하 또한 증가하였으며, 단위 길이당 압력 강하값은 유속 0.5 m/s에서 50 kPa/m 이하였다.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.1-9
• /
• 2006

Purpose: The purpose of this study was to evaluate the efficacy and substitute possibility of a newly developed flowable composite resins as a luting cement for translucent fiber post. Material & Method: Two kinds of 12 mm translucent fiber Post (D.T. Light-Post (Bisco, USA) and FRC Postec (Ivoclar vivadent, Liechtenstein) was inserted into the teflon mold (7 mm diameter, 9 mm long) and Filtek-Flow (3M ESPE. USA), a light activated flowable composite resin, was polymerized for 60 seconds through the post. Also, the post was cut from the tip to 9 mm, 6 mm, 3 mm, and Filtek-Flow was light cured according to each length. For comparison, 60 seconds light-cured and 24 hours self-cured two dual cured resin cement (Duo-cement (Bisco, USA) and 2 Panavia-F (Kuraray, Japan)) samples were prepared as control group. Also cavities (1 mm in width, 1 mm in depth and 12 mm in length) were prepared using acrylic plate and aluminum bar, and flowable composite resin was flied and light cured by the diffused light from the fiber post's side wall. The degree of polymerization was measured according to the distance from curing light using Vickers' hardness test. Result: Within the limitation of this study, the following conclusions were drawn: 1. Vickers' hardness of light cured dual cured resin cement and flowable composite resin decreased from Panavia-F, Filtek-Flow and Duo-cement accordingly (p<0.05). In the dual curing resin cement, light curing performed group showed higher surface hardness value than self cured only group (p<0.05). 2. Surface hardness ratio (light cured through fiber post /directly light cured) of D.T. Light-Post using Filtek-Flow showed about 70% in the 6 mm deep and about 50% in the 12 mm deep FRC Postec showed only 40% of surface hardness ratio. 3. Surface hardness ratio by diffused light from the post's side wall showed about 50% at 6 mm and 9 mm deep, and about 40% at 12 mm deep in D.T. Light-Post. However, FRC Postec showed about 40% at 6 mm deep, and almost no polymerization in 9 mm and 12 mm deep.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.249-266
• /
• 2016

The interest of this article lies in the proposition of using bionic method to develop a new sound absorber and analyze the efficient of this absorber in a ski cabin. Inspired by the coupling absorption structure of the skin and feather of a typical silent flying bird - owl, a bionic coupling multi-layer structure model is developed, which is composed of a micro-silt plate, porous fibrous material and a flexible micro-perforated membrane backed with airspace. The finite element simulation method with ACTRAN is applied to calculate the acoustic performance of the multi-layer absorber, the vibration modal of the ski cabin and the sound pressure level (SPL) near the skier's ears before and after pasting the absorber at the flour carpet and seats in the cabin. As expected, the SPL near the ears was significantly reduced after adding sound-absorbing material. Among them, the model 2 and model 5 showed the best sound absorption efficiency and the SPL almost reduced 5 dB. Moreover, it was most effctive for the SPL reduction with full admittance configuration at both the carpet and the seats, and the carpet contribution seems to be predominant.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2003년도 학술발표대회 발표논문초록집
• /
• pp.88-88
• /
• 2003

본 연구는 배란후 48시간째 회수된 난소로부터 황체세포를 체외배양 후 progesterone 분비에 대한 LH, IGF-1 및 TGF$\beta$첨가효과에 대해 검토하였다. 축산기술연구소에서 사육중인 돼지(체중 145$\pm$kg) 12두로부터 발정을 유도시켜 배란후 약 48시간째 도축하여 난소를 회수하였다. 회수된 난소로부터 황체를 분리하여 세절한 후 0.25% collagenase용액(0.025mg DNase, 50mM EDTA, 50mM Dithiothreitol)으로 37$^{\circ}C$의 진탕수조에서 30분간 배양하여 황체세포를 분리 회수하였다. 회수된 황체세포는 D-MEM 용액(GIBCO, 10% FCS와 antibiotics 첨가)으로 2회 세정하여 1$\times$$10^{6}$live cell/$m\ell$이 되도록 희석한 후 24 well culture plate(Coming, New Tork 14831)에 분주하여 $CO_2$ 배양기($CO_2$: 5%)에서 12시간 간격으로 배양액을 회수하였으며 48시간까지 배양하였다. 배양액 1$m\ell$당 LH, IGF-I 및 TGF$\beta$1을 단독 혹은 공배양하여 회수된 배양액내의 progesterone 농도를 RIA법으로 분석하였다. 돼지황체세포는 배양후 24시간째에 높은 농도의 progesterone이 측정되었으며 LH를 첨가한 대조구에 비해 유의적으로 높은 progesterone이 측정되었다. 또한 IGF-1 과 TGF$\beta$1을 첨가한 군에서도 높은 농도의 progesterone이 측정되었다 그러나 TGF$\beta$ 혹은 IGF-I 단독으로는 대조구의 결과와 큰 차이가 없었다 따라서 돼지 황체세포에서의 progesterone 분비는 TGF$\beta$ 및 IGF-I 그리고 LH의 황체세포의 progesterone 분비기능을 촉진하는 것으로 나타났다.

• Interaction and multiscale mechanics
• /
• 제2권3호
• /
• pp.321-332
• /
• 2009

Recent development in composites containing phase-transforming particles, such as vanadium dioxide or barium titanate, reveals the overall stiffness and viscoelastic damping of the composites may be unbounded (Lakes et al. 2001, Jaglinski et al. 2007). Negative stiffness is induced from phase transformation predicted by the Landau phase transformation theory. Although this unbounded phenomenon is theoretically supported with the composite homogenization theory, detailed stress analyses of the composites are still lacking. In this work, we analyze the stress distribution of the Hashin-Shtrikman (HS) composite and its two-dimensional variant, namely a circular inclusion in a square plate, under the assumption that the Young's modulus of the inclusion is negative. Assumption of negative stiffness is a priori in the present analysis. For stress analysis, a closed form solution for the HS model and finite element solutions for the 2D composite are presented. A static loading condition is adopted to estimate the effective modulus of the composites by the ratio of stress to average strain on the loading edges. It is found that the interfacial stresses between the circular inclusion and matrix increase dramatically when the negative stiffness is so tuned that overall stiffness is unbounded. Furthermore, it is found that stress distributions in the inclusion are not uniform, contrary to Eshelby's theorem, which states, for two-phase, infinite composites, the inclusion's stress distribution is uniform when the shape of the inclusion has higher symmetry than an ellipse. The stability of the composites is discussed from the viewpoint of deterioration of perfect interface conditions due to excessive interfacial stresses.

• 한국축산식품학회지
• /
• 제30권5호
• /
• pp.804-810
• /
• 2010

This study was performed to select protease-producing Bacillus sp. as a potential probiotic starter for fermented meat products. In order to isolate protease-producing bacterium from meju, measured the diameter of the clear zone on agar plate (TSA, 1% (w/v) skim milk) and analyzed for intracellular protease activity, then 10 Bacillus-like strains were isolated. Three Bacillus-like strains (P19, P27, and P33) among 10 strains were able to tolerate in acidic condition (TSB, pH 2.5, 2 h incubation). These 3 strains were showed antimicrobial activity against food-borne pathogenic bacteria. These vegetative cells of 3 strains were showed a survival rate of 0.04% to 0.08% under the artificial gastric acidic condition (TSB, pH 2.5 with 1% (w/v) pepsin), but spore-forming cells were 56.29% to 84.77%. Vegetative cells of 3 strains were the least bile-resistant, while spore-forming cells of 3 strains showed higher survival rate more than 76% under artificial bile condition (TSB, 0.1% (w/v) oxgall bile). In these strains, P27 strain was finally selected as a good probiotic strain. P27 strain was tentatively identified as Bacillus amyloliquefaciens by API CHB kit and 16S rDNA sequence analysis. The results of this study suggest that B. amyloliquefaciens P27 can be used as a potential probiotic starter for fermented meat product.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.893-904
• /
• 2013

NSGA-II와 함께 크리깅 메타모델기반 다목적최적설계 전략을 3차원 CFD 시뮬레이션을 통해 액셜 피스톤 펌프의 밸브 플레이트 형상을 최적화하는데 적용하였다. 펌프의 압력 변동을 저감하고 수력 효율을 최대화하기 위한 최적설계 과정은 두 단계, 즉 (1) 밸브 플레이트 상의 6개 형상 설계 변수를 선정하고 각 설계변수의 변화에 따른 CFD 해석을 수행하며, (2) CFD 데이터를 이용한 NSGA-II에 기반한 다목적최적설계 접근방식으로 최소 맥동 압력과 펌프 효율 설계에 대해 파레토 프론트를 평가하는 것으로 구성된다. 이들 결과로부터 최소 맥동 압력을 가지며 액셜 피스톤 펌프의 목표 효율에 도달하는 최적 절충해를 선택할 수 있었다.