• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.632-635
• /
• 2004

The purpose of this paper is to investigate the effect of arc current and contact velocity on the erosion of silver-based contact materials to be used in low voltage circuit breakers. The opening velocity during breaking, which is constant, ranges between 2m/s to 6m/s in the 415V $25kA_{rms}$. Contact erosion is evaluated by measuring the mass change of the cathode and anode. The results show that the increase in opening velocity from 2m/s to 6m/s leads to a decrease in the contact erosion. It is shown that the material transfer from one electrode to another depends on the transfer charge and the opening velocity of the contacts. The contact pairs of AgWC/AgCdO are superior to $AgWC/AgSnO_2In_2O_3$ or AgWC/AgC contact pairs in the contact erosion.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1071-1076
• /
• 2003

The nonlinear properties and their stability of ZPCCD- based varistors, which are composed of ZnO P $r_{6}$ $O_{ll}$ - CoO-C $r_2$ $O_3$-D $y_2$ $O_3$-based ceramics, were investigated in the D $y_2$ $O_3$ content range of 0.0∼2.0 mol%. The incorporation of D $y_2$ $O_3$ greatly affected the nonlinear properties and the best nonlinearity was obtained from 0.5 mol% D $y_2$ $O_3$ with nonlinear exponent of 66.6 and leakage current of 1.2 $\mu$A. Further addition of D $y_2$ $O_3$ deteriorated the nonlinear properties. In stability against DC accelerated aging stress state: 0.95 $V_{1mA}$/15$0^{\circ}C$/24 h, the 0.5 mol％ D $y_2$ $O_3$-doped varistor exhibited the highest stability, in which the variation rate of varistor voltage and nonlinear exponent are -1.9% and 10.5%, respectively. The remainder varistors resulted in thermal runaway due to low density of ceramics.s.s.

• Tribology and Lubricants
• /
• v.33 no.3
• /
• pp.106-111
• /
• 2017

Sapphire is an anisotropic material with excellent physical and chemical properties and is used as a substrate material in various fields such as LED (light emitting diode), power semiconductor, superconductor, sensor, and optical devices. Sapphire is processed into the final substrate through multi-wire saw, double-side lapping, heat treatment, diamond mechanical polishing, and chemical mechanical polishing. Among these, chemical mechanical polishing is the key process that determines the final surface quality of the substrate. Recent studies have reported that the material removal characteristics during chemical mechanical polishing changes according to the crystal orientations, however, detailed analysis of this phenomenon has not reported. In this work, we carried out chemical mechanical polishing of C(0001), R($1{\bar{1}}02$), and A($11{\bar{2}}0$) substrates with different sapphire crystal planes, and analyzed the effect of crystal orientation on the material removal characteristics and their correlations. We measured the material removal rate and frictional force to determine the material removal phenomenon, and performed nano-indentation to evaluate the material characteristics before and after the reaction. Our findings show that the material removal rate and frictional force depend on the crystal orientation, and the chemical reaction between the sapphire substrate and the slurry accelerates the material removal rate during chemical mechanical polishing.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.35-42
• /
• 2006

Although the conventional contour parallel tool path obtained from geometric information has been successful to make desirable shape, it seldom consider physical process concerns like cutting forces and chatters. In this paper, an optimized contour parallel path, which maintains constant MRR(material removal rates) at all time, is introduced and the result is verified. The optimized tool path is based on a conventional contour parallel tool path. Additional tool path segments are appended to the basic tool path in order to achieve constant cutting forces and to avoid chatter vibrations at the entire machining area. The algorithm has been implemented for two dimensional contiguous end milling operations with flat end mills, and cutting tests were conducted to verify the significance of the proposed method.

• Journal of Internet Computing and Services
• /
• v.17 no.3
• /
• pp.33-43
• /
• 2016

In this study, 3D-image based course material has been suggested as a potential pedagogical tool for laboratory courses for aviational maintenance in vocational high schools. With a special focus on assembly/disassembly of the combustion chamber, 3D contents described here are created by Soildworks 2014 based on the textbook widely used in aviational high schools. By analyzing several textbooks currently adopted at various schools, we have clearly shown that the current text-based teaching method is far from being effective regarding providing adequate learning environment for high school students who study aviational maintenance. From the analysis of the conventional textbooks, it is seen that it is urgent that we should come up with more effective and efficient way of teaching methods for these topics at vocational high schools. Using Solidworks, we have developed very vivid 3D image-based course material for topics related to a combustion chamber in the airplane. Newly developed 3D material is seen to clearly show step by step procedures of assembly and disassembly of the combustion chamber which has crucial importance in the aviational laboratory courses. Especially the transparent feature in Solidworks could make it possible to observe the parts covered by outer casing, which can not be seen even in any laboratory class with real objects. 3D animated views could provided unprecedented learning environment for students to acquire core knowledge with ease for the maintenance of a combustion chamber. In order to provide easy access for students to this 3D-based course material, the exclusive viewer is also developed using MS office powerpoint 2007. An example of a learning plan using 3d course material is suggested as well.

• Journal of the Korean Magnetic Resonance Society
• /
• v.11 no.2
• /
• pp.129-137
• /
• 2007

During the screening of material which has the antimicrobial activity against aminoglycoside-resistant bacteria, A new material ${\varepsilon}-(L-{\beta}-lysine)$ polypeptide from a culture medium of Streptomyces sp.(DWGS2) was isolated, and the structure and the physicochemical properties of the new material were elucidated. The new material was separated by column chromatography of the culture medium using Dowex $1{\times}2$, Silica gel, and Sephadex LH20 etc. The structure and molecular weight were determined with the data of NMR, MALDI mass, and ESI mass experiments. And the monomer obtained by hydrolysis of the new material with 6N-HCI was identified as a $L-{\beta}-lysine(T_2)$, which is a tail of bleomycin. As tail-region analogy, $T_2({\beta}-lysine$ derivatives from streptomyces) interactions with a self-complementary oligonucleotides, $d(CGCTTCGAAGCG)_2$, was investigated by NMR.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.96-101
• /
• 2017

In this article, pure $m-LaVO_4:Eu^{3+}$ and $t-LaVO_4:Eu^{3+}$ nanocrystals were prepared by an EG-assisted hydrothermal method with regular shapes. A series of controlled experiments showed that the pH value of a mixed solution, the volume ratio of $EG/H_2O$ and the dosage of the doped $Eu^{3+}$ all had an important effect on the sizes and shapes of the final products. Furthermore, the constitutional unit of the products changed from 0D to 2D with an increase in the EG dosage. The PL results showed that $t-LaVO_4$ doped with $Eu^{3+}$ ions had better luminescence properties than $m-LaVO_4$ due to its special structure. All of these results not only expand our understanding of the luminescence properties of lanthanide orthovanadates, but they also elucidate the principles of the crystal growth.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.2
• /
• pp.115-127
• /
• 2006

At the initial design stage, the generation process of the production material information of a building block and the simulation process of the block erection, which are required to perform the production planning and scheduling, have been manually performed by using 2D drawings, data of parent ships, and design experiences. To make these processes automatic, the accurate generation method of the production material information and the convenient simulation method of the block erection using the 3D CAD model, which was generated from the initial hull structural design system early developed by us, were proposed in this study. For this, a 3D CAD model for a whole hull structure was generated first, and the block division method for dividing the 3D CAD model into several building blocks was proposed. The generation method of the production material information for calculating the weight, center of gravity, painting area, joint length, etc. of a building block was proposed as well. Moreover, the simulation method of the block erection was proposed. Finally, to evaluate the efficiency of the proposed methods for the generation of the production material information and the simulation of the block erection, these methods were applied to corresponding processes of a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). As a result, it was shown that the production material information of a building block can be accurately generated and the block erection can be conveniently simulated in the initial design stage.

• Coupled systems mechanics
• /
• v.6 no.4
• /
• pp.399-415
• /
• 2017

This paper deals with the nonlinear static deflections of functionally graded (FG) porous under thermal effect. Material properties vary in both position-dependent and temperature-dependent. The considered nonlinear problem is solved by using Total Lagrangian finite element method within two-dimensional (2-D) continuum model in the Newton-Raphson iteration method. In numerical examples, the effects of material distribution, porosity parameters, temperature rising on the nonlinear large deflections of FG beams are presented and discussed with porosity effects. Also, the effects of the different porosity models on the FG beams are investigated in temperature rising.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.46-51
• /
• 2011

An extraction study of neodymium (Nd) was investigated with different individual and mixer of extractants such as PC88A, D2EHPA, Cyanex 272, Versatic acid 10 and D2EHPA+Alamine-304-1, D2EHPA+Alamine-308, D2EHPA+TBP, D2EHPA+TOPO, PC88A+Alamine-336 and PC88A+TBP respectively. In all cases, it was observed that the extraction percentage of Nd increased with increasing equilibrium pH and extractant concentration but rather opposite observation was found that the extraction percentage of Nd decreased with increasing TBP concentration along with D2EHPA. Adding TBP to PC88A had no favorable effect on the extraction of Nd, whereas use of a mixture of PC88A with Alamine336, increased the extraction percentage of Nd under the same condition. Based on our experimental studies, this paper reports the results on the basic approach and extraction of neodymium.