• 한국자기학회지
• /
• 제18권2호
• /
• pp.54-57
• /
• 2008

Magnetic torquer하는 인공위성의 초기 자세제어에 사용 되는 부품으로 지구자기장하에서 자기 쌍극자 모멘트가 받는 비틀림력을 이용하여 인공위성의 회전을 방지하고 특정 방향으로 인공위성의 자세가 안정되게 한다. 본 연구에서 개발 한 magnetic torque는 소형위성에 사용되는 것으로, magnetic torque거 자기적 특성뿐만 아니라 위성 발사 시 및 인공위성 궤도에서의 환경에서도 그 특성이 보장될 수 있게 환경시험을 하였다. 개발한 magnetic torquer는 포화 자기 쌍극자 모멘트가 $15Am^2$, 선형도 특성을 보이는 구간이 ${\pm}12Am^2$이고 선형도가 0.3% 미만이면서 질량이 0.46 kg이고 소비전력이 자기 쌍극자 모멘트가 $10Am^2$에 1 Watt 이였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.68-70
• /
• 2004

This paper deals with comparison of magnetic field distribution in LOA with slotless/slot stator. We derived magnetic field solutions in terms of vector potential and cylinderical coordinates. In particular this paper accounts for slotting effect due to stator slot opening by introducing a 2-D relative permeance function. The results of predictions from the analysis are compared with corresponding finite element analysis.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.68-73
• /
• 2009

Automotive inverters may require current sensors for motor torque control, especially, in applications of hybrid electric vehicles or fuel cell vehicles. In this paper, to achieve a compact, integrated and low cost current sensor, a hall current sensor without magnetic core is introduced for integrating an automotive inverter. The compactness of the current sensor is possible by using integrated magnetic concentrators based on the Hall effect. Magnetic fields caused by three-phase currents are analyzed and a magnetic shield design is proposed for decoupling the cross-coupled field. It offers galvanic isolation, wide bandwidth (>100kHz), and accuracy(< 1%). Using 2D FEM analysis, its performance is demonstrated with design parameters at a U-shaped magnetic shield. The proposed coreless current sensor is tested with rated current to validate the linearity and accuracy.

• 전기의세계
• /
• 제23권2호
• /
• pp.55-61
• /
• 1974

Nature of magnetic creep phenomena in low coercive force films(Ni 80%-Fe 20%) in form of narrow channels imbedded in high coercive force films is studied in this work. Aluminium is evaporated on the hot glass substrate and eched free in the shape of narrow channels by photoetoetching method. then, Permalloy(Ni 80%, Fe 20%) is deposited on these Aluminium substrate under the uniform field of 30(Oe) to introduce anisotropy. Permalloy film on Al has a high coercive force and one on the substrate devoid of Al has how coercive force. Magnetic revers domain which is introduced at the end of channel grows under the a.c field in hard axis direction, in spite of very weak d.c field in easy axis direction. This creeping is investigated as a function of external fields and channel widths. Permalloy film thickness is 500.angs.-900.angs. and channel widths are 40, 51, 65, 81, 115.mu. respectively. Creeping increases as external field increases while it decreases with channel width decrease. Creep velocity in channels depends on the a.c field along hard axis, d.c field along easy axis and channel widths and its range is 1-10cm/sec in this experiment. From study of dependence of creep velocity on channel width, it can be concluded that creep velocity is expressed in form of v=v$_{0}$ exp .alpha.(H-H$_{0}$) where .alpha. is a function of a.c field along hard axis and H is driving d.c field along easy axis, H$_{0}$ is not a coercive force of film as usuall expected but the d.c threshold field along easy axis which is a function of channel width. This characteristic is also confirmed by the study of dependence of creep velocity upon easy axis field strength. Value of .alpha. obtained is 1.3-2.3cm/sec We depending upon film charactor, hard axis field strength and frequency.uency.

• 전자공학회논문지C
• /
• 제35C권10호
• /
• pp.1-11
• /
• 1998

본 논문은 핵자기 공명신호를 검출하기 위하여 자석상자 내에 한 개의 코일을 가진 펄스방식의 핵자기 공명장치에 대한 새로운 구현방법에 관한 것이다. 수소 원자핵의 Larmor 주파수가 5MHz가 되도록 설계된 자석상자에 5MHz 고주파 자기장을 인가하여 자석상자 내에 투입된 글리세린 시료로부터 수소 원자핵의 공명신호를 얻었다. 자석상자 내의 정자기장은 자기장의 세기가 1168 gauss인 영구자석을 사용하여 만들었으며, 고주파 자기장은 5MHz의 주파수를 가지며 전류의 크기가 8A인 고주파 신호를 5.73μH의 코일에 인가하여 발생시켰다. 고주파 자기장의 발생시간을 2.8μsec로 하였을 때 핵자기 공명신호는 최대 크기로 나타났으며, 반복 검출을 하기 위하여 고주파 자기장의 발생주기를 100msec로 설계하였다. 시료에서 발산되어 자석상자 내의 코일에 감지되는 핵자기 공명신호는 Larmor 주파수와 같은 주파수를 가지는 신호가 진폭변조된 형태로 나타났다. 코일에 감지된 신호를 송수신 분리회로와 전치증폭기 및 중간증폭기에서 각각 20.7dB, 36dB 및 40dB로 증폭하고 동기검파회로에서 검파하여 핵자기 공명신호를 얻었다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권2호
• /
• pp.1-8
• /
• 2001

This paper deals with magnetic field analysis and computation of cogging torque using an analytical method in Interior Permanent Magnet Motor (IPMM). The magnetic field is analyzed by solving space harmonics field analysis due to magnetizing and the cogging torque is analyzed by combining field analysis with relative permeance. In reducing cogging torque, the inferences of various design variable and magnetizing distribution are investigated. It is shown that the slot and pole ratio (the pole-arc / pole-pitch ratio) combination has a significant effect on the cogging torque and presents a optimal flux barrier shape to reduce the cogging torque. The validity of the proposed technique is confirmed with 2-D Finite Element(FE) analysis.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권2호
• /
• pp.167-175
• /
• 2000

This paper describes the magnetic orientation of bull sperm separated into the head and the flagellum treated by DTT or heparin in a 5,400G static field. Semen samples collected from four bulls (Japanese Black) were mixed to the same sperm density. One percentage triton X-100 was used to extract the plasma membrane. The intact and demembranated sperm suspensions were treated with 20, 200, 2,000 mM DTT, 100, 1,000 or 10,000 units heparin solutions at $4^{\circ}C$ for 6 days. The decondensation of the sperm nuclei treated by DTT or heparin was examined by measuring the head area at 1, 3 and 6 days. After measuring the area, each sample was exposed to a 5,400G static magnetic field generated by Nd-Fe-B permanent magnets for 24 hours at room temperature. Results showed that the sperms were separated into the head and the flagellum through the DTT treatment. Almost of the separated heads showed that their long axis oriented perpendicularly to the magnetic lines of force, and most of the long axis perpendicularly oriented heads showed that their flat plane oriented perpendicularly in a 5,400G magnetic field. Also, the demembranation of the head tended to increase those perpendicular orientations, while those perpendicular orientations of the head declined with the decondensation of the sperm nuclei. These findings suggest that strong magnetic anisotropy for the perpendicular orientation of the long axis and the flat plane of the head occurs in the sperm nuclei in a 5,400G magnetic field. The separated flagellum showed lower parallel orientation, and the separated and demembranated flagellum showed parallel orientation to the magnetic lines of force in this magnetic field. These findings suggest that weak magnetic anisotropy of the parallel orientation of the flagellum occurs in the inside components in a 5,400G field.

• Journal of Astronomy and Space Sciences
• /
• 제14권2호
• /
• pp.286-296
• /
• 1997

EXOS-D(Akebono) 위성의 전기장 자료를 이용하여 자기유체 파동에 대해 조사하였다. EXOS-D 위성은 다른 위성들에 비해 비교 적 이심률이 큰 궤도를 돌고 있는데(근 지점 고도: 275km, 원지점 고도: 10,500km), 조사에서는 위성이 1989년 10월 원 지점 부근을 지나면서 측정한 자료(Magnetic Local Time이 9시에서 12시 사이, Magnetic Latitute는 $-30^{\circ}$에서 $0^{\circ}$사이에 해당)를 이용하였으며, 그 중에서도 특히 L값이 약 2에서 3사이에 있는 자료를 이용하여 지자기 적도 부근에서의 자기유체 파동 현상에 대해 조사하였다. 여기에서 사용된 EXOS-D 위성의 전기장 자료는 8초마다 평균한 값이며, 주파수 특성을 알아보기 위해 FFT를 수행하였다. 그 결과 플라즈마 구 내부에서의 자기력선 공명현상과 지구 자기 구의 cavity mode를 확인 할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.987-989
• /
• 2005

Axi-periodic analysis using magnetic vector potential is formulated in time harmonic field and applied to the field analysis for the end region of large turbo generator in this paper. By using axi-periodic analysis, the effect of flux shield, one of the structure placed in the end region of large turbo generator to prevent stator end from thermal damage, is studied, and eddy current loss in the flux shield is estimated for operation conditions. 3D FEA is used for the verification of presented analysis method. Because 3D flux distribution can be calculated with 2D modeling, magnetic field showing 3D distribution can be effectively calculated by axi-periodic analysis comparing with 3D FEA.