• The KIPS Transactions:PartB
• /
• v.14B no.3 s.113
• /
• pp.163-170
• /
• 2007

In autonomous navigation of a mobile vehicle or a mobile robot, localization calculated from recognizing its environment is most important factor. Generally, we can determine position and pose of a camera equipped mobile vehicle or mobile robot using INS and GPS but, in this case, we must use enough known ground landmark for accurate localization. hi contrast with homography method to calculate position and pose of a camera by only using the relation of two dimensional feature point between two frames, in this paper, we propose a method to calculate the position and the pose of a camera using relation between the location to predict through perspective transform of 3D feature points obtained by overlaying 3D model with previous frame using GPS and INS input and the location of corresponding feature point calculated using KLT tracking method in current frame. For the purpose of the performance evaluation, we use wireless-controlled vehicle mounted CCD camera, GPS and INS, and performed the test to calculate the location and the rotation angle of the camera with the video sequence stream obtained at 15Hz frame rate.

• Current Optics and Photonics
• /
• v.6 no.2
• /
• pp.161-170
• /
• 2022

Three-dimensional (3D) geometric models are introduced to correct vignetting, and a downhill simplex search is applied to determine the coefficients of a 3D model used in digital microscopy. Vignetting is nonuniform illuminance with a geometric regularity on a two-dimensional (2D) image plane, which allows the illuminance distribution to be estimated using 3D models. The 3D models are defined using generalized polynomials and arbitrary coefficients. Because the 3D models are nonlinear, their coefficients are determined using a simplex search. The cost function of the simplex search is defined to minimize the error between the 3D model and the reference image of a standard white board. The conventional and proposed methods for correcting the vignetting are used in experiments on four inspection systems based on machine vision and microscopy. The methods are investigated using various performance indices, including the coefficient of determination, the mean absolute error, and the uniformity after correction. The proposed method is intuitive and shows performance similar to the conventional approach, using a smaller number of coefficients.

• Smart Structures and Systems
• /
• v.25 no.2
• /
• pp.135-153
• /
• 2020

There has been a sustained interest towards the non-contact structural displacement measurement by means of videogrammetric technique. On the way forward, one of the major concerns is the spurious image drift induced by temperature variation. This study therefore carries out an investigation into the temperature effect of videogrammetric technique, focusing on the exploration of the mechanism behind the temperature effect and the elimination of the temperature-caused measurement error. 2D videogrammetric measurement tests under monotonic or cyclic temperature variation are first performed. Features of measurement error and the casual relationship between temperature variation and measurement error are then studied. The variation of the temperature of digital camera is identified as the main cause of measurement error. An excellent linear relationship between them is revealed. After that, camera parameters are extracted from the mapping between world coordinates and pixels coordinates of the calibration targets. The coordinates of principle point and focal lengths show variations well correlated with temperature variation. The measurement error is thought to be an outcome mainly attributed to the variation of the coordinates of principle point. An approach for eliminating temperature-caused measurement error is finally proposed. Correlation models between camera parameters and temperature are formulated. Thereby, camera parameters under different temperature conditions can be predicted and the camera projective matrix can be updated accordingly. By reconstructing the world coordinates with the updated camera projective matrix, the temperature-caused measurement error is eliminated. A satisfactory performance has been achieved by the proposed approach in eliminating the temperature-caused measurement error.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1222-1227
• /
• 2006

본 연구의 목적은 객체의 형상정보(3D mesh)와 색/질감정보(image)를 이용하여 텍스쳐 맵핑된 고품질의 가상모델을 생성하는데 있다. 3 차원 형상정보에 대응하는 이미지 상의 텍스쳐 좌표 관계를 구하기 위해 오브젝트 좌표계와 카메라 좌표계 사이의 변환행렬, 카메라의 초점거리, 카메라 CCD 와 프레임상의 이미지 사이의 aspect ratio 를 파라미터로 하는 3D-2D 정합을 수행한다. 이러한 3D-2D 정합을 효율적으로 수행하기 위하여, 카메라 내부파라미터 검정단계, 신뢰도가 높은 초기해 설정단계, 비선형 최적화(Newton method) 단계로 접근한다. 또한, 색/질감정보로 이용되는 객체의 이미지는 촬영조건에 의해 스펙큘러(specular)나 이미지 픽셀값의 포화상태(saturation) 등의 결점을 포함한다. 영상내의 스펙큘러 좌표와 3D-2D 정합의 결과를 이용하여 촬영 당시의 광원을 추정하고, 근사화된 빛반사도 함수(BRDF)를 이용하여, 텍스쳐의 픽셀값 변조를 통해 이미지 촬영 당시의 광원효과가 제거된 디퓨즈 텍스쳐를 획득한다. 본 연구에서는 퐁(Phong)의 모델을 근사화한 빛 반사도 함수 모델로 사용하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.2
• /
• pp.29-36
• /
• 2008

In this paper we propose a real-time method to estimate a pointing region from two camera images. In general, a pointing target exists in the face direction when a human points to something. Therefore, we regard the direction of pointing as the straight line that connects the face position with the fingertip position. First, the method extracts two points in the face and the fingertips region by using detecting the skin color of human being. And we used the 3D geometric information to obtain a pointing detection and its region. In order to evaluate the performance, we have build up an ICIGS(Interactive Cinema Information Guiding System) with two camera and a beam project.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.05a
• /
• pp.298-300
• /
• 2023

자율주행 및 robot navigation 시스템에서 물체 인식 성능향상을 위해 대부분 MSF(Multi-Sensor Fusion) 기반 설계를 한다. 따라서 각 센서로부터 들어온 정보를 정합하는 것은 정확한 MSF 알고리즘을 위한 필요조건이다. 다양한 선행 연구에서 2D 데이터에 대한 공격을 진행했다. 자율주행에서는 3D 데이터를 다루어야 하므로 선행 연구에서 하지 않았던 3D 데이터 공격을 진행했다. 본 연구에서는 스케일링 공격 기반 카메라-라이다 센서 간 정합 모델의 정확도를 저하시키는 공격 방법을 제안한다. 제안 방법은 입력 라이다의 포인트 클라우드에 스케일링 공격을 적용하여 다운스케일링 단계에서 공격하고자 한다. 실험 결과, 입력 데이터에 공격하였을 때 공격 전보다 평균제곱 이동오류는 56% 이상, 평균 사원수 각도 오류는 98% 이상 증가했음을 보였다. 다운스케일링 크기 별, 알고리즘별 공격을 적용했을 때, 10×20 크기로 다운스케일링 하고 lanczos4 알고리즘을 적용했을 때 가장 효과적으로 공격할 수 있음을 확인했다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.2
• /
• pp.151-157
• /
• 2002

A 3-dimenstional automatic solder paste inspection system is described that can be used to find defects occurring in solder paste printing process. This system extracts height and volume information very fast as well as area of solder paste printed, using multiple slit ray projection and Galvano-mirror scanning. Methods are presented on calibration of camera and slit projector, real-time image processing of multiple slit images, determination of reference height, and extraction of paste height information are proposed. Performance of the system was successfully demonstrated through field tests.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.203-204
• /
• 2022

본 논문에서는 다수의 적외선 카메라의 2D 패시브마커 영상을 이용한 3차원 리지드 바디(Rigid Body) 자세추정 방법을 제안한다. 1차로 개별 카메라의 내부 변수를 구하기 위해 체스보드를 이용한 칼리브레이션 과정을 수행하고, 2차 보정 과정에서 3개의 적외선 마커가 있는 삼각형 구조물을 모든 카메라가 관찰 가능하도록 움직인 후 프레임별 누적된 데이터를 계산하여 카메라 간의 상대적인 위치정보의 보정 및 업데이트를 진행한다. 이 후 각 카메라의 좌표계를 3D월드 좌표계로 변환하는 과정을 통해 3개 마커의 3차원 좌표를 복원하여 각 마커간 거리를 계산하여 실제 거리와의 차이를 비교한 결과 1mm 내외의 오차를 측정하였다.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.393-400
• /
• 2021

Body weight of livestock is a crucial indicator for assessing feed requirements and nutritional status. This study was performed to estimate the body weight of Korean cattle (Hanwoo) using body volume determined from three-dimensional (3-D) image. A TOF camera with a resolution of 640×480 pixels, a frame rate of 44 fps and a field of view of 47°(H)×37°(V) was used to capture the 3-D images for Hanwoo. A grid image of the body was obtained through preprocessing such as separating the body from background and removing outliers from the obtained 3-D image. The body volume was determined by numerical integration using depth information to individual grid. The coefficient of determination for a linear regression model of body weight and body volume for calibration dataset was 0.8725. On the other hand, the coefficient of determination was 0.9083 in a multiple regression model for estimating body weight, in which the age of Hanwoo was added to the body volume as an explanatory variable. Mean absolute percentage error and root mean square error in the multiple regression model to estimate the body weight for validation dataset were 8.2% and 24.5kg, respectively. The performance of the regression model for weight estimation was improved and the effort required for estimating body weight could be reduced as the body volume of Hanwoo was used. From these results obtained, it was concluded that the body volume determined from 3-D of Hanwoo could be used as an effective variable for estimating body weight.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.20-32
• /
• 2010

Previous hardware devices to capture human motion have many limitations; expensive equipment, complexity of manipulation or constraints of human motion. In order to overcome these problems, real-time motion capture algorithms based on computer vision have been actively proposed. This paper presents an efficient analysis method of multiple view images for real-time motion capture. First, we detect the skin color regions of human being, and then correct the image coordinates of the regions by using camera calibration and epipolar geometry. Finally, we track the human body part and capture human motion using kalman filter. Experimental results show that the proposed algorithm can estimate a precise position of the human body.