• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.526-529
• /
• 2002

Various fluoride films on a glass substrate were prepared and characterized in order to determine the best seed layer for a microcrystalline silicon (${\mu}c$-Si) film growth. Among the various group-IIA-fluoride systems, the $CaF_2$films on glass substrates illustrated (220) preferential orientation and a lattice mismatch of less than 0.7% with Si. $CaF_2$ films exhibited a dielectric constant between $4.1{\sim}5.2$ and an interface trap density ($D_{it}$ as low as $1.8{\times}10^{11}\;cm^{-2}eV^1$. Using the $CaF_2$/glass structure, we were able to achieve an improved ${\mu}c$-Si film at a process temperature of 300 $^{\circ}C$. We have achieved the ${\mu}c$-Si films with a crystalline volume fraction of 65%, a grain size of 700 ${\AA}$, and an activation energy of 0.49 eV.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.6
• /
• pp.271-276
• /
• 2020

The relationship between the hardness and interlamellar spacing of discontinuous precipitates (DPs) formed by continuous cooling was studied for Mg-9%Al-1%Zn alloy. After solution treatment at 683 K for 24 h, the specimens were cooled to room temperature with different cooling rates ranging from 0.2 to 2 K·min^-1, in order to obtain DPs with various interlamellar spacings. It was found that cooling rate of 2 K·min^-1 yielded only small amount of nodular DPs at the grain boundaries, while cooling rates below 2 K·min^-1 yielded both DPs and continuous precipitates (CPs). The volume fraction of DPs increased with increasing cooling rate up to 0.5 K·min^-1, over which it abruptly decreased. The hardness of DPs was increased with an increase in the cooling rate, whereas the interlamellar spacing of the DPs was decreased with respect to cooling rate. The hardness of the DPs formed by continuous cooling was correlated with the interlamellar spacing and can follow a Hall-Petch type relation as in the case of pearlite with lamellar morphology.

• Preventive Nutrition and Food Science
• /
• v.2 no.4
• /
• pp.285-290
• /
• 1997

Previously, a 50% aqueous methanol extract of Galla rhois was shown to be the most potent tyrosinase inhibition activity with an {TEX}$IC_{50}${/TEX}(the concentration causing 50% inhibition of tyrosinase activity) of 0.2mg/ml of 205 crude drug extracts. To isolate tyrosinase inhibitors, the methanol extract was evaporated to a small volume in vacuo, and then partitioned stepwise with benzene and ethyl acetate(EtOAc). the EtOAc fraction was solubilized in 10% MeOH solution, and then fractionated successively by Diaion HP-20 and Sephadex LH-20 column chromatography, and preparative HPLC. Three phenolic compounds were isolated, and characterized as gallic acid(GA), methyl gallate(MG) and 1,2,3,4,6-penta-O-galloyl-$\beta$-D-glucose(PGG) by UV, IR, {TEX}${1}^H${/TEX}-&{TEX}${13}^C${/TEX}-NMR, and FAB-MS spectroscopy, PGG({TEX}$IC_{50}${/TEX}=50$\mu\textrm{g}$/ml) showed a considerable inhibitory effect against mushroom tyrosinase, while GA({TEX}$IC_{50}${/TEX}=1.6mg/ml) and MG({TEX}$IC_{50}${/TEX}=234$\mu\textrm{g}$/ml) did not show an appreciable effect. Meanwhile, MG inhibited greatly melanogenesis in a murine melanocyte cell line, Mel-Ab. MG and PGG showed typical noncompetitive inhibition patterns against mushroom tyrosinase. These results suggest that PGG and MG may be potentially useful as either anti-browning or anti-melanogenic agents in foods and cosmetics.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.361-374
• /
• 2020

This paper is concerned with the thermoelastic bending of FG beams resting on two-layer elastic foundations. One of these layers is Winkler springs with a variable modulus while the other is considered as a shear layer with a constant modulus. The beams are considered simply supported and subjected to thermo-mechanical loading. Temperature-dependent material properties are considered for the FG beams, which are assumed to be graded continuously across the panel thickness. The used theories contain undetermined integral terms which lead to a reduction of unknowns functions. Several micromechanical models are used to estimate the effective two-phase FG material properties as a function of the particles' volume fraction considering thermal effects. Analytical solutions for the thermo-mechanical bending analysis are obtained based on Navier's method that satisfies the boundary conditions. Finally, the numerical results are provided to reveal the effect of explicit micromechanical models, geometric parameters, temperature distribution and elastic foundation parameters on the thermoelastic response of FG beams.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2010.04a
• /
• pp.166-170
• /
• 2010

Six different size of torch-ignition device were applied in a constant volume combustion chamber for evaluating the effects of torch-ignition on combustion. The torch-ignition device was designed six different volumes and same orifice size. The combustion pressures were measured to calculate the mass burn fraction and combustion enhancement rate. In addition, the flame propagations were visualized by shadowgraph method for the qualitative comparison. The result showed that the combustion pressure and mass burn fraction were increased when using the torch ignition device. And the combustion duration were decreased. The combustion enhancement rates of torch-ignition cases were improved in comparison with conventional spark ignition. Finally, the visualization results showed that the torch-ignition device the torch-ignition induced faster burn than conventional spark ignition due to the earlier transition to turbulent flame and larger flame surface, during the initial stage. And the initial flame propagation was effected torch-ignition volume.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.282-289
• /
• 2017

The flexural behavior tests of UHPC segmental Box girder which has 160MPa compressive strength and 15.4m length were carried out. The test variables are area of prestressing wires, volume fraction of steel fibers and longitudinal reinforcing bars in upper flange and web. PS tendons which has 32 strands of 15.2mm diameter in lower flange, 24 strands and 14 strands in lower flange were arranged and volume fraction of 2%, 1.5% and 1.0% is used in box girder concrete. UHPFRC box girder which has 32 strands in lower flange showed the over reinforcement and brittle behavior. UHPFRC box girder which has 24 strands showed the similar peak load as 32 strands girder and ductile behavior as large deflection. UHPFRC box girder which has 14 strands showed half of the peak load of 24 strands box girder and ductile behavior. After the application of the formular for the reinforcement index to the behavior of the UHPFRC box girders, reinforcement index does not determine the characteristic of behavior of UHPFRC box girder exactly. So the index should consider the dimension precisely and modify the reference value corresponding to the 0.005 strain of the prestressing strands.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.405-409
• /
• 2003

The effect of substitution of Gd ions for Ca ions in the B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$(C $a_{1-x}$ G $d_{x}$)$_{2.03}$ C $u_{3.06}$ $O_{ 10+{\delta}}$/ (x=0.0~0.06) was investigated by measuring x-ray diffraction patterns, lattice constants, do resistivity and Hall effect. We found the solubility limit of Gd in the 110 K phase to be x < 0.015. Within the solubility limit, the c-axis seemed to decrease with increasing x. In the region of the 110 K single phase, the critical temperature $T_{c}$ gradually decreased with an increasing the Gd concentration x, corresponding to a small change of the carrier concentration.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.99-99
• /
• 2018

The major aim of this work is the research of secondary metabolites isolated from the aerial parts of Petasites japonicus. The plant material is extracted with a polar solvent, which is 95% by volume methanol at room temperature. The concentrated extract was partitioned as EtOAc, n-BuOH, and $H_2O$ fractions. From the EtOAC and n-BuOH fraction, two bakkenolides and two caffoylquinic acid were isolated using the Diaion HP-20, silica gel, ODS-A, and Sephadex LH-20 column chromatographies. According to the results of the results of physico-chemical and spectroscopic data including NMR, MS and UV. The chemical structures of the compounds were respectively determined as bakkenolide B (1), bakkenolide D (2), 1,5-dicaffeoylquinic acid (3), and 5-O-caffeoylquinic acid (4). These results suggest that the compounds isolated from the aerial parts of this plant were almost identical with known components of Petasites japonicus. However, it is necessary to investigate more about the difference of amounts of constituents according to harvest area and time.

• Journal of Welding and Joining
• /
• v.28 no.2
• /
• pp.79-83
• /
• 2010

In this study, newly developed welding consumables for EGW were welded in EH 36 TM steel plates and their welded joints were evaluated in point of mechanical properties and microstructures compared with imported consumables. Newly developed welding consumables were evaluated as good arc stability and slag fluidity, substantially the same with imported products. The tensile strength of all welded joints were sufficient to meet the requirements specified in a ship’s classification(490~640MPa) and all areas of fracture were heat affected zone(HAZ). Charpy absorbed energy values of all EG welded metals were sufficient to meet the requirements of classification(min. 34J) and those of newly developed wires were evaluated to be better than those of imported wires. As a result observing microstructures of single and tandem EG welded metals through optical and scanning electron microscope (OM&SEM), no grain boundary ferrite(PF(G)) were created in a prior austenite grain boundary and a volume fraction of a fine acicular ferrite were observed very high.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.2
• /
• pp.108-116
• /
• 1999

Gray cast iron with a high damping capacity has been used for controlling the vibration and noise in various mechanical structures. Nevertheless, its usage has been often restricted due to its poor tensile strength. Therefore, it is necessary to improve tensile strength at the expense of a loss in damping capacity. This study is aimed at finding the best combination of tensile strength and damping capacity by varying austempering time and temperature range from $320^{\circ}C$ to $380^{\circ}C$ after austenization at $900^{\circ}C$ for 1hr. The effect of austempering condition on hardness and the volume fraction of retained austenite is investigated as well. The results obtained are summarized as follows : (1) With an increase in austempering temperature, both tensile strength and hardness decrease while damping capacity improves. (2) Austempering at $350^{\circ}C$, resulting in a mixture of upper and lower bainite with partially retained austenite, exhibits the optimum combination of tensile strength and damping capacity.