• IE interfaces
• /
• v.9 no.1
• /
• pp.41-52
• /
• 1996

As part of effort to reduce the process time from design to manufacture and delivery, the concept of CE(concurrent engineering) has been applied to design process. In this research, the drawing information management system (DIMS) was developed based on CE. The system can distribute electronic documents of drawing or work instruction parallel to all reviewers simultaneously and collect their annotations through network. Mark-up functions are used for annotations on the electronic documents. DIMS is a system which integrates drawing management, engineering BOM, CAD and raster drawings, etc. In this system, a SUN workstation is interfaced with PCs by LAN. CIMCAD-2D, Image Hunter, and ORACLE RDBMS are used for CAD drawings, raster drawings, and drawing information management, respectively. As an integration tool for all the information, LINKAGE is adopted.

• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.120-125
• /
• 2007

Magnesium alloy has low formability at room temperature and therefore, in many cases, forming at elevated temperatures is necessary to obtain the required material flow without failure. Tn the present study, square cup deep drawing tests using the magnesium alloy AE31 sheet were experimentally conducted using the porches and dies with different edge radius to evaluate the formability sensitivity to the die design variables. The experimental results showed that the fracture position over the cup wall moved from the punch nose to the flange as the die temperature increased, and that the drawing depth change was more affected by the punch radius than the die radius.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.628-634
• /
• 2005

The drawability of AZ31B magnesium sheet is estimated at various temperatures (200, 250, 300, 350, $400^{\circ}C$), forming speeds (20, 50, 100mm/min), thicknesses (0.8, 1.4mm) and blank holding forces (2.0, 2.8, 3.4kN). The deep drawing process (DDP) of circular cup is used in forming experiments. The results of deep drawing experiments show that the drawability is well at the range from 250 to $300^{\circ}C$, 50mm/min forming speed and 2.0kN blank holding force. The 0.8mm magnesium sheets were deformed better than 1.4 mm. Blank holding force was controlled in order to improve drawability and prevent the change of cup thickness. When blank holding force was controlled, tearing and thickness change were decreased and limit drawing ratio was improved from 2.1 to 3.0.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.3_4
• /
• pp.168-185
• /
• 2003

This paper presents a progressive algorithm that not only can narrow down the search domain in the course of face identification but also can fast reconstruct various 3D objects from a sketch drawing. The sketch drawing, edge-vertex graph without hidden line removal, which serves as input for reconstruction process, is obtained from an inaccurate freehand sketch of a 3D wireframe object. The algorithm is executed in two stages. In the face identification stage, we generate and classify potential faces into implausible, basis, and minimal faces by using geometrical and topological constraints to reduce search space. The proposed algorithm searches the space of minimal faces only to identify actual faces of an object fast. In the object reconstruction stage, we progressively calculate a 3D structure by optimizing the coordinates of vertices of an object according to the sketch order of faces. The progressive method reconstructs the most plausible 3D object quickly by applying 3D constraints that are derived from the relationship between the object and the sketch drawing in the optimization process. Furthermore, it allows the designer to change viewpoint during sketching. The progressive reconstruction algorithm is discussed, and examples from a working implementation are given.

• Transactions of Materials Processing
• /
• v.15 no.2 s.83
• /
• pp.153-157
• /
• 2006

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire have been investigated. Test pieces were fabricated using die series with different mean and final reduction ratios. Surface residual stresses in the axial direction were measured by X-ray diffraction, Bruker's 2-dimensional GADDS system. The results were compared with stress profiles that were calculated by 3D and 2D finite element simulations, ABAQUS 6.4 program in finite element analysis(FEA). By means of the FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.625-633
• /
• 2007

Recently human beings are enforcing marine investigations to extend their living environment from land to the sea. Therefore, this study grasped objects in the bottom of the sea and its topographical undulation and acquired topographic map with a sound detector. In result, This study acquired their images with a sound detector and can draw up a Drawing of Sea Mapping and a three-dimensional modeling map.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.38-47
• /
• 2000

Recently, finite element method has been used as an effective tool in the design process of sheet metal forming. In the present study, an implicit method and an explicit method have been developed for 2D analysis and 3D analysis, respectively, and applied to several processes including plane strain draw bending and TWB sqaure cup drawing. Also, commercial codes are used for geometrically complex problems, such as tube hydroforming, "L" cup deep drawing and side frame forming. In this paper, basic formulations used in the methods are introduced and results obtained from the applications are discussed.discussed.

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.226-229
• /
• 2000

A 2D comic model, a comic-style line drawing model having only eyebrows, eyes, nose and mouth, is much easier to generate facial expressions with small number of points than that of 3D model. In this paper we propose a 3D emotional editor using a 2D comic model, where emotional expressions are represented by using action units(AU) of FACS. Experiments show a possibility that the proposed method could be used efficiently for intelligent sign-language communications between avatars of different languages in the Internet cyberspace.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2004.05a
• /
• pp.246-247
• /
• 2004

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.2
• /
• pp.121-132
• /
• 2005

There have been several efforts for the investigation of the formal development team which was formed in the IAI to develop a common 2D standard specification between ISO/STEP and IAI/IFC since 2002. As a result, a drafting model has been included in the IFC2.x2 model. However, to be used actively in the construction practice for construction drawing exchange, the IFC model should be extended to the paper space for multiple views, drawing output, and delivery of drawings. Therefore, in this paper, the methodology of relating STEP and IFC has been investigated and schema extension of paper space(drawing sheet, presentation view, view pipeline), complex entity(leader), and dimension(associative) have been achieved. The resulting, IFC model will enable a basic harmonization with KOSDIC. SCADEC, and STEP-CDS by retaining the current IFC architecture. In addition, IT systems for the construction industry can be beneficial from the developed data model.