• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.514-517
• /
• 2012

본 논문은 2D도면을 제작하는 모듈과 기본커널 기능을 이용한 2D판재 네스팅 기능을 구현한 시스템을 활용하여 2D도면으로 만들어진 부품의 형상을 구매된 원자재에 자동/수동으로 배치하면서 자재의 손실을 최소화 할 수 있으며, 절단 경로, DNC, 각종 자재 및 생산정보를 산출할 수 있는 모듈을 개발하여 구현한다. 이 시스템의 기대효과로는 좀 더 편하고 좀 더 정확하게 다양한 원자재를 생산할 수 있도록 하는 것과 오차가 크게 발생했을 시 재작업을 하는 경우를 방지하고, 보다 효율 높은 알고리즘을 응용 개발함으로써 또 다른 분야로 활용성을 높이기 위한 것이다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.205-211
• /
• 1999

In this study, we utilized 2D conformal transformation method to give coordinatesbased on GPS surveying data to NAHMIS (National Highway Management Information System) drawings which are lack of coordinates. To determine the best method which is comparable with GPS digital map, we compared a transformation result obtained by unique parameters applied to the whole region of about 20 km of the NAHMIS drawings and the similar result of the tile based transformations. As the result of map joining, the error was within 2 m for both cases. In this way, NAHMIS can be used for a systematic management of construction drawings. Moreover, NAHMIS can contribute the management of highway and the data exchange between other systems by a unification of coordinate system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.77-83
• /
• 2001

To product the map by terrestrial photogrammetry method, a few rather nuisance stereo image acquiring processing and plot using expensive analytical instruments have to be performed. In this study, plot was made by acquiring and rectification image using simple method rather than above it. For this, geometry rectification system was constructed for the generation of single ortho-image analysis. and these ortho-images of architecture were made and analysed by appling various warping methods. As a result, the performance of single image analysis could be estimated, and it is expected that the application of this is possible to various non-topographic photogrammetry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5716-5720
• /
• 2012

To expand the use of three dimensional(3D) product modelling in the army, we have analyzed military technical data management system, as well as the military guidelines for the unique format and content of technical data package. Because traditional munition sector is based on the machinery and equipment industry, they have usually applied two dimensional(2D) drawings to prepare a design and to make a product. For that reason, there is no provision for 3D product modelling as a technical data package in the military guideline. In this study, we proposed an improvement scheme for the vitalization of 3D product modelling in the army not only in terms of related guideline but also military technical data management system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1242-1244
• /
• 2012

최근 건설 산업의 패러다임으로 부각중인 BIM 기술은 기획 설계 시공 단계를 거쳐 유지관리 단계에서의 활용성을 넓히고 있으며 시설안전공단에서는 총 5만 6,450개 이르는 국내 사회간접자본(SOC)인 시설물 유지관리에 BIM 기술을 도입하기위한 연구를 진행중에 있다. 현재 국내에서는 웹 기반 시설물관리 시스템(FMS : Facility Management System)을 통해 국내 시설물의 기본정보와 점검 및 관리 정보를 서비스 중에 있으나 대상 시설물의 설계도면 및 유지관리 도면, 안전점검 실사 보고서 등이 2D 기반으로 유통되고 있어 BIM 적용을 위한 많은 체계마련이 시급한 실정이다. 이에 본 논문에서는 2D 기반의 시설물 유지관리 체계에 BIM을 활용하기위한 방안을 제안하고자 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.54-60
• /
• 2016

Building information modeling (BIM) has the advantage of having been utilized for various scenarios through a single model. Although extracting 2D drawings from BIM is one of the advantages, there are many difficulties when utilized in practical work. Architectural detail drawings are an important factor for expressing interior finishing materials and complicated construction methods, as well as for cost estimations. However, creating detail drawings does not have a standard, and each design company establishes its own detail drawings, so it is hard to share or exchange information in the construction industry. Therefore, this study suggests a systemized method for making detail drawings, and explains how it can be utilized as back data for quantity take-off and construction expenses linked with BIM libraries.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.343-349
• /
• 2007

This paper addressed a recognition method of land registration map based on fuzzy inference scheme, which is able to solve the time complexity problem of typical method [Fig. 2]. Not only line color, thickness but also number, character are used as a fuzzy input parameter. It concentrated on generation of fuzzy association map, and useful informations are extracted result from fuzzy inference. These results are precedent process for estimating the construction space and restoring 3D automatic modeling. It can also utilize to the internet service acceleration propulsion business such as u-Gov based land registration service.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.147-154
• /
• 2018

This paper focuses on the development of a support system that can rapidly generate the design data of a hot-form die with cooling channels, commonly known as hot stamping technology. We propose a new process for designing hot-form dies based on our (automated) system, whose main features are derived from the analysis of the design requirements and design process in the current industry. Our design support system consists of two modules, which allow for the generation of a 3D geometry model and its 2D drawings. The module for 3D modeling automation is implemented as a type of CATIA template model based on CATIA V5 Knowledgeware. This module automatically creates a 3D model of a hot-form die, including the cooling channels, that depends on the shape of the forming surface and the number of STEELs (subsets of die product) and cooling channels. It also allows for both the editing of the positions and orientations of the cooling channels and testing for the purpose of satisfying the constraints on the distance between the forming surface and cooling channels. Another module for the auto-generation of the 2D drawings is being developed as a plug-in using CAA (CATIA SDK) and Visual C++. Our system was evaluated using the S/W test based on a user defined scenario. As a result, it was shown that it can generate a 3D model of a hot form die and its 2D drawings with hole tables about 29 times faster than the conventional manual method without any design errors.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.6
• /
• pp.393-402
• /
• 2006

The purpose of this study is to develop mechanisms of nD model-based design by the combination of 2D drawing standards and 3D building models from the current 2D and text-based design. The aim of this study can be archived by defining the 2D model extension definitions for the IFC model development and harmonizing existing 2D standards. The paper examines 1) 3D Representation of Building Element and Building Services element, and 2D Model extension of IFC2X.2, 2) Basic development of additional 2D element that should be added to IFC model, and 3) mapping method between current 2D standard and IFC2.X2. Following this approach, the interoperability problem between 3D model and 2D drawing can be solved and finally an extended data model could be developed.