• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1673-1677
• /
• 2008

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.234-235
• /
• 2003

All solid-state UV lasers provide efficient, clean and semipermanent light sources for various applications, such as eye surgery, microchip lithography. $CsLiB_{6}O_{10}$ (CLBO) is one of the most suitable crystals for UV generation because of its small walk-off, large effective nonlinear susceptibility in UV region and high damage threshold. We produced fourth (266 nm) and fifth (213 nm) harmonic generation of an Nd：YAG laser (1064 nm) with $LiB_{3}O_{5}$ as a second harmonic generation medium and CLBO as a fourth harmonic and fifth harmonic mediums. (omitted)

• 한국레이저가공학회지
• /
• 제15권3호
• /
• pp.1-6
• /
• 2012

The friction force of patterned needle in elastomer have been investigated to verify the application for bio and plastic industry. The micro pattern on the needle surface were prepared by 266 nm, 20 ns laser and 800 nm, 220 fs laser, which were able to generate the different surface roughness. The friction force was measured by the load cell of 10 N capacity. As the results, the friction force of no patterned needle is almost constant during the needle penetrates the silicone rubber sample. However, the needle having asperities shows the variation of the friction force. The higher the surface roughness is, the smaller the friction force is until the surface roughness is very high. In our experiment conditions, the reduction of the friction force by 20 % compared to no pattern needle was achieved with straight and $50{\mu}m$ discrete line generated by 266 nm, 20 ns laser.

• 한국결정성장학회지
• /
• 제9권5호
• /
• pp.459-462
• /
• 1999

Recent advances in NLO Borate Crystals for UV Generation are reviewed with the particular emphasis on the technique to improve the life time of UV optics. The laser-damage resistance of CLBO and fused silica surfaces was successfully improved after removing polishing compound by ion beam etching. The polishing compound embedded in the CLBO and fused silica surfaces were to a depth of less than 100nm. We were able to remove polishing compound without degrading the surface condition when the applied ion beam voltage was less than 200 V. The laser-induced surface damage threshold of CLBO was improved up to 15J/$\textrm{cm}^2$(wavelength: 355 nm, pulse width: 0.85 ns)as compared with that of the as-polished surface (11 J/$\textrm{cm}^2$). The laser-induced surface damage of fused silica also increased from 7.5J/$\textrm{cm}^2$ to 15J/$\textrm{cm}^2$. For the irradiation of a 266 nm high-intensity and high-repetition laser light, the surface lifetime of CLBO and fused silica could be more doubled compared with that of the as-polished surface.

• 한국방사선학회논문지
• /
• 제14권6호
• /
• pp.833-839
• /
• 2020

전 세계적으로 중증 급성 호흡 증후군 코로나바이러스에 의해 감염예방 및 사회적 인식이 크게 변화되었으며, 그로 인해 의료 원내감염 노출이 높은 환자에 관한 감염관리 지침 및 과정을 더 강화하고 관리감시를 더 철저히 하고 있다. 감염예방을 위해서는 멸균이 최우선으로 시행이 되어야 하며, 저비용, 쉬운 설치와 조작이 쉬운 멸균법을 찾아 적절한 멸균효과를 제시하고자 한다. 본 연구에서는 충치균을 오염시켜 출력 4 W, 조사 시간 60, 150, 300 sec로 자외선 살균기를 이용하였으며, 레이저는 출력 0.8, 1.5 W로 각각 파장 266, 355 nm로 조사하였다. 자외선 살균기는 150 sec 이상에서 감염예방에 안전성을 나타내었으며, 레이저는 1.5 W와 0.8 W, 266 nm에서 예방의 안전성을 나타내었다. 결과에서 출력이 높고 253.7 nm에 가까운 파장일수록 멸균효과는 뛰어났다.

• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.695-703
• /
• 2020

의료기술 발전으로 인해 의료기기 사용이 증가하는 추세이다. 의료기기 중 이식 및 치료를 위해 인체 내에 사용되는 경우가 많다. 그러므로 의료기관에서는 감염 예방을 위해 의료기기 형태와 재질에 따른 멸균법들이 다양하게 적용되고 있다. 뼈 이식에서 수산화인화석 재료가 가장 많이 보급되어 있다. 소형 의료기기에 알맞은 비전리방사선 중 고출력에너지를 가진 Q-switch Nd:YAG 레이저를 이용한 멸균법을 제시하고자 한다. 대장균과 충치균을 수산화인화석 디스크에 오염시켜, 출력1.5 W, 파장은 각각 자외선(266, 355 nm), 가시광선(532 nm), 적외선(1,064 nm), 1과 10 펄스를 각각 조사하였다, 본 연구에서 자외선 파장인 1.5 W, 266 nm, 10 pulse에서 멸균력을 가장 이상적으로 보여주었다. 다른 파장대인 적외선, 가시광선은 소극적 멸균력을 보였으며, 자외선 A와 자외선 C는 펄스에 따라 멸균 차이를 보였다. 레이저 멸균에서 파장 및 펄스에 따라 멸균 차이를 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1992년도 제2회 학술발표회 논문개요집
• /
• pp.3-10
• /
• 1992

pphotostimulated desorpption of NO chemisorbed on ppt(001) at 80K has been studied by the (1+1)-resonance-enhanced multipphoton ionization((1+1)-REMppI) technique. A linearly ppolarized ArF excimer laser ( =193 nm, 6.41eV) is used as the ppumpp laser. A high adsorpption rate selectivity was found in the expposure deppendence of the NO desorpption yield. The NO desorpption yield increases drastically when the amount of NO expposure exceeds ~1.8 L. This result shows that the amount of NO sppecies with a large cross section for pphotostimulated desorpption increases drastically at higher NO coverages. Using scanning tunneling microscoppy, we have observed structural modifications of the chlorinated Si(111)-7$\times$7 surface induced by 266nm laser irradiation. At very low laser fluence of 0.7mJ/$\textrm{cm}^2$, at which thermal desorpption can be ignored, a pperiodic stripped ppattern of a single domain is imaged. This ppattern consists of flat terraces and narrow grooves of ~60 and ~10A in width, resppectively.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.462-487
• /
• 1996

We report on the fourth and fifth harmonics generations of Nd:YAG laser radiation realized in CsLiB6O10(CLBO). The values of 500 mJ and 230 mJ at 266 nm and 213 nm were obtained from 2200 mJ of fundamental energy. Doping of CLBO has been carried out and the Al doping was found to give rise to an enhancement of mechanical and chemical properties.

• 한국환경과학회지
• /
• 제8권6호
• /
• pp.699-704
• /
• 1999

The Photodegradation efficient of total organic compounds in the drinking water has been studied using the methods of photocatalytic reaction and laser beam irradation. The results are summarized as follows; 1. The photodegradation efficiency of total organic compounds shows as $50\%\;to\;80\%$ as within one hour and after this the efficiency is decreased slowly. 2. The photodegradation efficiency of total organic compounds shows as 65 to $90\%$ within 3.3min. when Nd : YAG beam is irradiated to the water layer. 3. An excellent observation of the organic compound removal efficiency gives revealed in that case of the longest wavelength of 532nm is irradiated among the three kinds of laser beam sources of 532nm, 355nm and 266nm. 4. The organic compound removal efficiency shows high in the case of UV beam irradiation in the thin layer of water. However the efficiency is not depended on the thickness of water layer severely. 5. The removal efficiency of the organic compounds in the direct irradiation shows higher than the indirect irradiation in the case of UV beam, but the efficiency is not depended on the direction of irradiation in the case of Nd : YAG beam irradiation.

• 한국대기환경학회지
• /
• 제17권5호
• /
• pp.385-393
• /
• 2001

We have developed a Differential Absortion LIDAR (DIAL) method for the measurement of lower tropospheric ozone concentration. We used two laser beams from quadrupled Nd:YAG (266 nm) for the resonance wavelength and dye lasers (299.5 nm) for non -resonance wavelength. Aerosol extinction coefficients in the lower troposphere was computed by both Klett and Slope methods. To correct the SIN (Signal -Induced Noise) effect caused by photo detector, we subtracted a new-fitted baseline on the background part of a LIDAR signal, after the subtraction of the DC level. This is because SIN can be treated as an exponentially decaying tail. Using theme results, ozone profiles were obtained approximately 2km at daytime and 3km at nighttime. We compared the results derided by the Slope method with those measured by UV spectrometer. The computed results are in mostly good agreement with experimental results. In the measurement of the vertical layer, we observed the variation of the ozone profiles around the top mixed layer.