• 제목/요약/키워드: 220V

검색결과 607건 처리시간 0.027초

220 V 직렬 아크고장발생 시 점화 시간/전류 특성 및 에너지 분석 (Analysis of Ignition Time/Current Characteristics and Energy when Series Arc-Fault Occurs at Rated 220 V)

  • 고원식;문원식;방선배;김재철
    • 전기학회논문지
    • /
    • 제62권8호
    • /
    • pp.1184-1191
    • /
    • 2013
  • Probability of ignition due to arc-fault and energy of the arc-fault for the case of applying serial arc-fault interruption time of 120 V defined in UL 1699 to the voltage of 220 V of domestic condition and also for the case of applying it to the HIV wire type are analyzed. It has been confirmed that when the arc-fault occurs under 5 A, 10 A, and 20 A. Probability of ignition for the three different current conditions is 0.74(74%), 0.48(48%), and 0.32(32%) respectively for respective interruption time within 1 sec, 0.4 sec, and 0.2 sec. We discover that when we apply the same arc interruption time for 120 V defined in UL 1699 to the domestic environment of 220 V. The probability of ignition increases from 1.5% for 120 V condition to as much as 74% for 220 V condition. Conclusively, if we apply the standard for the serial arc-fault interruption time defined in UL 1699 for 120 V to the domestic condition of 220 V, the fire prevention effect of electric fire due to arc-fault equal to that of UL standard of 120 V can not be achieved.

Modulating the Voltage-sensitivity of a Genetically Encoded Voltage Indicator

  • Jung, Arong;Rajakumar, Dhanarajan;Yoon, Bong-June;Baker, Bradley J.
    • Experimental Neurobiology
    • /
    • 제26권5호
    • /
    • pp.241-251
    • /
    • 2017
  • Saturation mutagenesis was performed on a single position in the voltage-sensing domain (VSD) of a genetically encoded voltage indicator (GEVI). The VSD consists of four transmembrane helixes designated S1-S4. The V220 position located near the plasma membrane/extracellular interface had previously been shown to affect the voltage range of the optical signal. Introduction of polar amino acids at this position reduced the voltage-dependent optical signal of the GEVI. Negatively charged amino acids slightly reduced the optical signal by 33 percent while positively charge amino acids at this position reduced the optical signal by 80%. Surprisingly, the range of V220D was similar to that of V220K with shifted optical responses towards negative potentials. In contrast, the V220E mutant mirrored the responses of the V220R mutation suggesting that the length of the side chain plays in role in determining the voltage range of the GEVI. Charged mutations at the 219 position all behaved similarly slightly shifting the optical response to more negative potentials. Charged mutations to the 221 position behaved erratically suggesting interactions with the plasma membrane and/or other amino acids in the VSD. Introduction of bulky amino acids at the V220 position increased the range of the optical response to include hyperpolarizing signals. Combining The V220W mutant with the R217Q mutation resulted in a probe that reduced the depolarizing signal and enhanced the hyperpolarizing signal which may lead to GEVIs that only report neuronal inhibition.

3상 3300/220V 6kVA 양방향 지능형 반도체 변압기의 동작과 성능 분석 (Operation and Performance Analysis of 3-Phase 3300/220V 6kVA Bidirectional Intelligent Semiconductor Transformer)

  • 김도현;김재혁;한병문
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2013년도 추계학술대회 논문집
    • /
    • pp.58-59
    • /
    • 2013
  • 본 과제에서는 3.3kV/220V, 6kVA 용량의 양방향 지능형 반도체 변압기의 새로운 회로 구성을 제안하고 그 동작과 성능을 분석하였다. 제안하는 3상 반도체변압기는 1.9kV/127V 단상 반도체 변압기 모듈 3대를 Y-결선으로 구성하였으며, 각 단상 반도체 변압기는 고압 고주파 AC-DC 정류기와 저압 양방향 DC-DC-AC 컨버터로 구성되어 있다. 제안하는 3.3kV/220V, 6kVA 3상 반도체변압기를 제작하고 실험을 통해 그 동작과 성능을 검증하였다. 먼저 1차적으로는 3상 반도체변압기의 정상동작에 대해 실험을 실시하고 그 후에는 3상 입력전압에 외란이 발생하였을 때 보상성능을 순방향 조류와 역방향 조류 2가지 경우로 나누어 실험을 실시하고 그 결과를 분석하였다. 분석한 결과 제안하는 반도체변압기는 양방향 전력흐름이 가능하고 입력전압에 Sag가 발생한 경우에도 이를 보상하여 수전단이나 부하에 전력공급이 가능함을 알 수 있었다.

  • PDF

저압전동기 정격전압 선정기준 및 사례 연구 (A Guide to Selection of Voltages for Low Voltage Motors and Case Study)

  • 이민용;장중구;서상진
    • 전기기술인
    • /
    • 제235권3호
    • /
    • pp.35-41
    • /
    • 2002
  • 저압 동력설비는 사용하는 국내 수용가 혹은 산업플랜트에서는 주로 380V 전압을 채택하고 있다. 이는 전기사업법에서 저압의경우 표준 공급전압을 110V, 220V 및 380V로 정하여 놓고 있으며 3상 4선 방식에 의하여 동일 변압기를 이용 220V와 380V로 정하여 놓고 있으며 220V와 380V를 함께 공급할 수 있다는 장점이 있기 때문인 것으로 사료된다.

  • PDF

향후 우리나라의 2차 배전전압

  • 홍순학;장정태;송일근;김경화
    • 전기의세계
    • /
    • 제42권1호
    • /
    • pp.12-20
    • /
    • 1993
  • 본고에서는 언급한 바와 같이 각 나라의 전기방식은 단상 3선식과 4선식이 대부분임을 알 수 있으며, 우리나라의 경우 부하특성은 동력수용이 급증에 따른 부하의 고밀도화로 인한 3상 4선식 220/380-Y 공급이 증가 추세에 있다. 한편, 수요밀도가 높은 단상 2선식 공급지역도 부하가 증가됨에 따라 공급능력의 한계성 도달이 예상되고 단상 3선식 110/220V 지역 역시 공급능력의 한계성 도달이 예상되는 바, 단상3선식 220/440V(440V는 Floating) 승압의 필요성이 요구되고 있다.

  • PDF

6고조파 주입 PWM을 이용한 3상 승압형 컨버터 고조파저감 (Harmonic Reduction in Three-Phase Boost Converter with Sixth Order Harmonic Injected PWM)

  • 이정호;김재문;이정훈;원충연;김영석;최세완
    • 전력전자학회논문지
    • /
    • 제5권2호
    • /
    • pp.176-183
    • /
    • 2000
  • 본 논문에서는 단일 스위치 3상 승압형 컨버터 입력전류의 왜형을 개선하기 위한 6고조파 주입 PWM 방식이 제안디었다. 주기적인 6고조파 전압이 한 스위칭 사이클 내에 컨버터 스위치의 듀비티를 가변하도록 제어회로에 주입되었다. 그 결과 입력 상전류는 입력전압을 따라가고 거의 1에 가까운 역률을 얻었다. 실험결과는 3상 입력 AC 140∼220V, 400V∼6kW 저항부하와 3상 AC 220V, 비선형 부하인 CO2 아크 용접기에 의하여 입증하였다.

  • PDF

배전산업의 현대화:220V 송압사업

  • 허남칠
    • 전기의세계
    • /
    • 제46권7호
    • /
    • pp.33-35
    • /
    • 1997
  • 본 원고에서는 승압의 배경 및 외국의 승압현황과 경제적 이득, 높은 전압으로 승압에 따른 안전대책, 승압을 추진하면서 발생된 효과 등을 고찰하여 220V 승압사업이 성공적으로 마무리될 수 있는 방향을 제시해 보고자 한다.

  • PDF

Comparative Study on 220V AC Feed System and 300V DC Feed System for Internet Data Centers

  • Kim, Hyo-Sung
    • Journal of Power Electronics
    • /
    • 제12권1호
    • /
    • pp.157-163
    • /
    • 2012
  • Internet Data Centers (IDCs), which are essential facilities in the modern IT industry, typically have scores of MW of concentrated electric loads. The provision of an Uninterruptible Power Supply (UPS) is necessary for the power feed system of IDCs owing to the need for stable power. Thus, conventional IDC AC power feed systems have three cascaded power conversion stages, (AC-DC), (DC-AC), and (AC-DC), resulting in a very low conversion efficiency. In comparison, DC power feed systems require only a single power conversion stage (AC-DC) to supply AC main power to DC server loads, resulting in comparatively high conversion efficiency and reliability [4-11]. This paper compares the efficiencies of a 220V AC power feed system with those of a 300V DC power feed system under equal load conditions, as established by the Mok-Dong IDC of Korea Telecom Co. Ltd. (KT). Experimental results show that the total operation efficiency of the 300V DC power feed system is approximately 15% higher than that of the 220V AC power feed system.