• Journal of the Korean Professional Engineers Association
• /
• v.31 no.2
• /
• pp.35-40
• /
• 1998

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1184-1191
• /
• 2013

Probability of ignition due to arc-fault and energy of the arc-fault for the case of applying serial arc-fault interruption time of 120 V defined in UL 1699 to the voltage of 220 V of domestic condition and also for the case of applying it to the HIV wire type are analyzed. It has been confirmed that when the arc-fault occurs under 5 A, 10 A, and 20 A. Probability of ignition for the three different current conditions is 0.74(74%), 0.48(48%), and 0.32(32%) respectively for respective interruption time within 1 sec, 0.4 sec, and 0.2 sec. We discover that when we apply the same arc interruption time for 120 V defined in UL 1699 to the domestic environment of 220 V. The probability of ignition increases from 1.5% for 120 V condition to as much as 74% for 220 V condition. Conclusively, if we apply the standard for the serial arc-fault interruption time defined in UL 1699 for 120 V to the domestic condition of 220 V, the fire prevention effect of electric fire due to arc-fault equal to that of UL standard of 120 V can not be achieved.

• Experimental Neurobiology
• /
• v.26 no.5
• /
• pp.241-251
• /
• 2017

Saturation mutagenesis was performed on a single position in the voltage-sensing domain (VSD) of a genetically encoded voltage indicator (GEVI). The VSD consists of four transmembrane helixes designated S1-S4. The V220 position located near the plasma membrane/extracellular interface had previously been shown to affect the voltage range of the optical signal. Introduction of polar amino acids at this position reduced the voltage-dependent optical signal of the GEVI. Negatively charged amino acids slightly reduced the optical signal by 33 percent while positively charge amino acids at this position reduced the optical signal by 80%. Surprisingly, the range of V220D was similar to that of V220K with shifted optical responses towards negative potentials. In contrast, the V220E mutant mirrored the responses of the V220R mutation suggesting that the length of the side chain plays in role in determining the voltage range of the GEVI. Charged mutations at the 219 position all behaved similarly slightly shifting the optical response to more negative potentials. Charged mutations to the 221 position behaved erratically suggesting interactions with the plasma membrane and/or other amino acids in the VSD. Introduction of bulky amino acids at the V220 position increased the range of the optical response to include hyperpolarizing signals. Combining The V220W mutant with the R217Q mutation resulted in a probe that reduced the depolarizing signal and enhanced the hyperpolarizing signal which may lead to GEVIs that only report neuronal inhibition.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.12 s.72
• /
• pp.14-17
• /
• 1982

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.58-59
• /
• 2013

본 과제에서는 3.3kV/220V, 6kVA 용량의 양방향 지능형 반도체 변압기의 새로운 회로 구성을 제안하고 그 동작과 성능을 분석하였다. 제안하는 3상 반도체변압기는 1.9kV/127V 단상 반도체 변압기 모듈 3대를 Y-결선으로 구성하였으며, 각 단상 반도체 변압기는 고압 고주파 AC-DC 정류기와 저압 양방향 DC-DC-AC 컨버터로 구성되어 있다. 제안하는 3.3kV/220V, 6kVA 3상 반도체변압기를 제작하고 실험을 통해 그 동작과 성능을 검증하였다. 먼저 1차적으로는 3상 반도체변압기의 정상동작에 대해 실험을 실시하고 그 후에는 3상 입력전압에 외란이 발생하였을 때 보상성능을 순방향 조류와 역방향 조류 2가지 경우로 나누어 실험을 실시하고 그 결과를 분석하였다. 분석한 결과 제안하는 반도체변압기는 양방향 전력흐름이 가능하고 입력전압에 Sag가 발생한 경우에도 이를 보상하여 수전단이나 부하에 전력공급이 가능함을 알 수 있었다.

• Electric Engineers Magazine
• /
• v.235 no.3
• /
• pp.35-41
• /
• 2002

The selection of voltage is one of the most significant factors in the design of power system for industrial plant. It is a major factor in determining over-all system cost, flexibility, and ease of future expansioin. This paper presents the study results on the selection of economic voltage for low voltage motors.

• 전기의세계
• /
• v.42 no.1
• /
• pp.12-20
• /
• 1993

본고에서는 언급한 바와 같이 각 나라의 전기방식은 단상 3선식과 4선식이 대부분임을 알 수 있으며, 우리나라의 경우 부하특성은 동력수용이 급증에 따른 부하의 고밀도화로 인한 3상 4선식 220/380-Y 공급이 증가 추세에 있다. 한편, 수요밀도가 높은 단상 2선식 공급지역도 부하가 증가됨에 따라 공급능력의 한계성 도달이 예상되고 단상 3선식 110/220V 지역 역시 공급능력의 한계성 도달이 예상되는 바, 단상3선식 220/440V(440V는 Floating) 승압의 필요성이 요구되고 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.176-183
• /
• 2000

In this paper, sixth order hannonic injected PWM for improving‘ input CWTent distortion of single switch t three phase boost converter is presented. Peliodic sixth order hmmonic ${\gamma}$oltage is inj<:ded in the control circuit t to var${\gamma}$ the duty ratio of the converter switch within one switching cycle. In the result, the input phase c currents are forced to track the input voltage and an 해most unity power factor is obtained. Expelimental r results are verified by converter operating at 400V /6kW with three phase 140V ~220V input and by C02 arc w welding machine which was nonlinear load with 3 $\phi$ 220V input.

• 전기의세계
• /
• v.46 no.7
• /
• pp.33-35
• /
• 1997

본 원고에서는 승압의 배경 및 외국의 승압현황과 경제적 이득, 높은 전압으로 승압에 따른 안전대책, 승압을 추진하면서 발생된 효과 등을 고찰하여 220V 승압사업이 성공적으로 마무리될 수 있는 방향을 제시해 보고자 한다.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.157-163
• /
• 2012

Internet Data Centers (IDCs), which are essential facilities in the modern IT industry, typically have scores of MW of concentrated electric loads. The provision of an Uninterruptible Power Supply (UPS) is necessary for the power feed system of IDCs owing to the need for stable power. Thus, conventional IDC AC power feed systems have three cascaded power conversion stages, (AC-DC), (DC-AC), and (AC-DC), resulting in a very low conversion efficiency. In comparison, DC power feed systems require only a single power conversion stage (AC-DC) to supply AC main power to DC server loads, resulting in comparatively high conversion efficiency and reliability [4-11]. This paper compares the efficiencies of a 220V AC power feed system with those of a 300V DC power feed system under equal load conditions, as established by the Mok-Dong IDC of Korea Telecom Co. Ltd. (KT). Experimental results show that the total operation efficiency of the 300V DC power feed system is approximately 15% higher than that of the 220V AC power feed system.