One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.
${\beta}-Glucan$의 점증제 및 겔화제로서의 이용성을 규명하기 위하여 메성 및 찰성보리 ${\beta}-glucan$ 용액의 리을로지 특성을 비교하였다. 메성 및 찰성보리 ${\beta}-glucan$ 용액 모두 의가소생 유체 특성을 나타내었으며, Power law mdel에 잘 적용되었다. Arrhenius 식에 의해 구한 층밀림 속도 $700s^{-1}$에서의 겉보기 점도의 활성화에 너지는 농도가 1%에서 4%로 .증가함에 따라 메성 ${\beta}-glucan$의 경우 20.01에서 16.78kj/mol로, 찰성 ${\beta}-glucan$의 경우 지수의 경우 27.18에서 17.82kj/mol로 감소하였으며, 지수함수식에 의해 구한 농도의존성 상수인 A는 온도가 $20^{circ}C$에서 $65^{circ}C$로 증가함에 따라 메성 ${\beta}-glucan$의 경우 $0.37%^{-1}$에서 $0.42%^{-1}$로, 찰성 ${\beta}-glucan$의 경우 $0.49%^{-1}$에서 $0.57%^{-1}$로 증가하였다. 찰성보리 ${\beta}-glucan$의 고유점도는 2.38dL/g으로 메성보리 ${\beta}-glucan$의 1.60dL/g보다 높게 나타났으며, 비점도와 환원농도의 관계에서 구한 critical coil overlap parameter($C^*[{\eta}]$)를 경계로 기울기가 달라져 $C[{\eta}] 영역에서는 메성 및 찰성보리 ${\beta}-glucan$ 간에 차이가 나지 않았지만 $C[{\eta}]>C^*[{\eta}]$ 영역에서는 각각 2.907과 3.757을 나타내었다. 동적점탄성 측청 결과 진동수 변환중 cross-over가 일어나고 이후의 진동수 영역에서는 저장탄성율이 손실탄성율보다 높은 값을 나타내었으며, 24시간 경과 후 겔을 형성하여 겔화제로서의 이용 가능성을 보여주었다.
법랑질의 주성분인 hydroxyapatite 분말을 성형하고 소결하여 착색을 유발한 다음 과산화수소의 농도와 적용 기간의 변화에 따라 나타나는 미세 조직과 기계적 성질의 변화 및 미백 효과 등에 관한 연구를 통해 다음과 같은 결론을 얻었다. 1. 과산화수소의 농도와 적용시간이 증가함에 따라 미백 효과가 증가되었다. 2. 표면조도는 15% 과산화수소 10일, 30% 과산화수소 7, 10일 적용 시 유의한 차이로 증가하였다(p<0.05). 3. X-선회절 분석결과 미백처리 전 후의 결정상의 변화는 관찰되지 않았으나, 주사전자현미경 관찰시 표면의 미세구조는 과산화수소 농도와 적용시간의 증가에 따라 미세기공이 증가하였다. 4. 2축 굽힘강도는 30%농도의 과산화수소로 7, 10일 적용하였을 때 유의한 차이로 감소되었다(p<0.05). 5. 미소 경도값은 15% 과산화수소 10일과 30% 과산화수소 3, 7, 10일 적용 후 유의한 차이로 감소되었다(p<0.05).
주조 포스트코아와 치질 계면에서 시멘트 종류에 따른 미세누출의 변화를 알아보기 위해 상악 전치부 및 하악 견치, 총 40개의 단근치를 백악-법랑 경계 2mm 상방에서 절단하고 백악-법랑 경계 1mm 상방에 chamfer 변연 형성 후, 통상적 근관 형성, 및 충전을 시행하고 주조용 Parapost를 이용하여 40개의 주조 포스트코아를 제작하였다. 각 군당 10개씩 4군으로 분배하여, 실험 I군에서는 인산아연 시멘트인 Fleck's를, 실험 II군에서는 글래스아이오노머 시멘트인 Fuji I을, 실험 III군에서는 4-META계 레진 시멘트인 Superbond C & B를, 실험 IV군에서는 인산 에스테르계 레진 시멘트인 Panavia 21로 각각 접착한 다음, 500회 thermocycling 및 1% basic fuchsin 염색액 침액을 거친 후 시편을 협설면으로 절단하고 광학 현미경상에서 포스트와 치질 계면사이의 미세누출정도를 지수로 산정하여 시편 협설면의 지수 평균을 계산한 후 각 군간의 비교 분석을 통해 다음과 같은 결론을 얻었다. 1. 모든 시편의 계면에서 미세누출이 관찰되었다. 2. 실험 I군에서 실험 II군, 실험 III군, 및 실험 IV군에 비해 유의성있게 가장 높은 미세누출지수를 보였고, 실험 II군에서 실험 III군, 및 실험 IV군에 비해 유의성있게 높은 미세누출지수를 보였다(p<0.05). 3. 실험 IV군에서 가장 낮은 미세누출지수를 보였으나 실험 III군과의 통계학적 차이는 없었다(p>0.05).
연구배경 : 국내의 지역사회획득 폐렴 원인균에 대한 연구가 부족하며, 특히 레지오넬라 폐렴균은 중증환자에서 중요한 원인균임을 고려할 때 이에 대한 연구가 시급하다. $NOW^{TM}$ Legionella Urinary Antigen Test는 Legionella 폐렴균의 90%를 차지하는 Legionella penumophila serogroup 1에 대해 90% 이상의 민감도를 갖는 검사법으로 이를 이용하였다. 방 법 : 1999년 7월부터 일년간 강원지역 일개 대학병원에 입원한 지역사회획득 폐렴환자를 대상으로 요즘 레지오넬라 항원 검사를 시행하였다. 결 과 : 총 54예중 요중 레지오넬라 항원이 양성으로 나온 예는 없었다. 환자의 59.3%는 중환자실에 입원한 중증의 지역사회획득 폐렴 환자였다. 결 론 : 국내에서 Legionella pneumophila에 의한 지역사회 획득 폐렴은 매우 드물 것으로 생각되어, 향후 치료지침을 만드는데 고려해야 할 요소로 생각된다.
연구목적 : 본 연구는 청소년기에 경험하게 되는 스트레스 생활사건과 건강문제의 빈도를 조사하고 이 두가지 사이의 상관관계를 비교분석하여 청소년기 스트레스 생활사건이 신체적증상 및 불안에 미치는 영향을 조사하기 위한 것이다. 방법 : 저자가 임의로 선정한 모 중학교 남녀 학생 475명을 대상으로 스트레스 생활사건과 건강 문제에 관한 설문지를 사용하여 스트레스 생활사건과 건강문제의 빈도를 조사하였고, 8개 요인으로 나눈 스트레스 생활사건 항목과 5개의 기능으로 나눈 건강문제 항목사이의 상관관계를 비교분석하였다. 결과 : 1) 대상자들이 지난 1년동안 경험했던 스트레스 생활사건 수는 평균 3개(7.7%) 이었고. 문항별로는 '죽음에 대해 생각을 했다'가 가장 많았다. 요인별로는 "괴로움"과 "자발성"에 관한 항목이 가장 많았다. 남녀별 비교에서 남학생은 "가족", "자발성"에 관한 항목, 여학생은 "괴로움"에 관한 항목이 더 많았다. 학년별 비교에서 저학년은 "학교폭력" "탈선"에 관한 항목이 가장 많았고 학년이 올라 갈수록 "성문제", "자발성"에 관한 항목이 더 많았다. 2) 대상자들이 가장 많이 호소한 건강문제는 '아주 피곤함을 느낀다'가 가장 많았다. 그러나 건강문제 항목별로는 "불안"에 관한 항목이 가장 많았다. 남녀별 비교에서 남학생보다 여학생이 현저하게 더 많은 건강문제를 호소하였고 톡히 "불안"에 관한 항목이 가장 많았다. 학년별 비교에서 학년이 올라갈수록 건강문제 호소가 더 많았다. 3) 8개의 스트레스 생활사건에 관한 요인중 "가족과 부모", "괴로움", "성문제", "탈선", "자발성"에 관한 항목은 5개의 건강문제 항목과 매우 유의한 상관관계가 있었다. "사고와 질병"에 관한 항목은 "신경계"를 제외한 4개의 건강문제 항목과 "기타항목"은 "일반상태"와 "신경계"를 제외한 3개의 건강문제 항목과 유의한 상관관계가 있었다. 그러나 "변화"에 관한 항목은 5개의 건강문제 항목과 상관관계가 없었다. 결론 : 청소년기는 부모로부터 분리, 독립하고자 하는 "자발성"과 "성문제", 이 시기에 초래되는 여러 변화에 대응하여 나타나는 "괴로움"에 관한 스트레스 생활사건을 많이 경험하게 되며, 이런 것들은 신체적 기능 저하 및 불안과 매우 밀접한 관련이 있음을 제시하고 있다.
Verfondern, Karl;Nabielek, Heinz;Kendall, James M.
Nuclear Engineering and Technology
/
제39권5호
/
pp.603-616
/
2007
Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.
명대 장경악은 기상 현상에 관하여 "오운육기를 토대로 기화를 추측하면 피차의 영허에 대해 십중칠팔은 들어맞는다"고 하였는데, 이를 착안하여 논자는 "황제내경"에 기재된 기상에 관하여 운기의 기후 특징을 한반도 서울을 중심으로 실제 기상관측 자료와 비교 분석하였다. 기상청 자료를 토대로 서울의 평균 풍속 평균 기온 강수량 평균 습도를 운기 이론 가운데 대운과 비교하였다. 또한 과거 1564년에서 1863년까지 한반도의 이상 기후 발생 빈도와 운기성쇠 운기동화 운기순역과 비교하였을 때 운기동화의 경우와 이상 기후 발생 빈도와 일치하였다. 다만 본 논문의 실제관측 자료와 통계는 한국의 서울을 중심한 분석이기에, 중국과의 어느 정도 오차를 고려하여야 할 것이다.
변화된 미래 기후조건에서 한반도의 식량수급전망에 긍정적 변수로 떠오르고 있는 가을보리의 안전재배지대 재설정 및 잠재 생산량 추정을 위해 한반도 지역 RCP8.5 기반 미래 기온전망을 현재 평년의 상세 전자 기후도와 결합하여 2011-2100 기간 중 보리 품종군별 재배안전지대의 지리적 변화를 10년 단위로 예측하였다. 먼저 1971-2000 기간 중 1월 최저기온과 평균기온 분포도를 30m 격자 해상도로 남북한 전역에 걸쳐 준비하고, 이 기준 기온분포도 위에 기상청의 RCP8.5 기반 한반도 12.5km 시나리오 기후자료에서 산출한 기준평년 기점의 10년 단위 기온상승폭을 중첩시켰다. 2100년까지 매 10년 단위 1월의 최저기온과 평균기온의 예상분포도상에 농촌진흥청에서 제시한 보리 추파재배 시 품종군별 안전월동기준에 따라 재배안전지대를 표현한 결과, 2020년대에는 강원도와 북한 남부 대부분 지역에서 겉보리 재배가 가능해지며 남한 전역에서는 쌀보리 재배가 가능해질 것이고, 2040년대에는 북한 평야지대 거의 모든 벼논에서 쌀보리 이모작이 가능해질 것으로 예상되었다. 현재 파악되고 있는 북한의 경지면적은 160만 ha 인데, 2040년대 이후 북한지방의 논에는 벼 수확 후 쌀보리를, 밭에는 옥수수, 감자 후작으로 겉보리를 재배한다면 연간 최대 400만 톤의 식량을 추가로 확보할 수 있을 것이다.
1999년 3월부터 2000년 3월까지 서해안 만경강 하구역의 심포리 지선 간석지에서 채집한 갯우렁이 (Lunatia fortuni)와 큰구슬우 렁이 (Neverita didyma)에서 Cercaria yamagutii Ito,1957를 검출하고, 실험실에서 이매패류인 동죽 (Mactra venerifomis)에 감염 시켜 피낭유충이 형성됨을 확인하였고, 동 실험에서 형성된 피낭 유충을 괭이갈매기 (Larus crassiostris)에 경구 감염시켜 10일 후 성충을 얻어 Acanthoparyphium tyosenense Yamaguti, 1939임을 확인하여 지금까지 밝혀지지 않았던 이 충의 전 생활사를 밝혀냈다. 제1중간숙주는 해산 복족류인 갯우렁이, 큰구슬우렁이, Tympanotonus microptera와 Cerithidea (Cerithidea) largillierti, Cerithidea (Cerideopsilloa) cingulata이고, 제 2중간숙주는 이매패인 동죽, 개량조개, 맛조개, 바지락이며, 종숙주는 괭이갈매기와 물오리의 일종인 Melaniua fusca stejnegeri이다. 갯우렁이와 큰구슬우렁에서 검출한 Cercaria yamagutii를 실온 $25^{\circ}C$ 전후에서 동죽이 들어있는 수조에 넣은 후 30분 이내에 입수는 피낭의 크기 $300\sim360{\mu}m$, 탈낭유충$790\sim800\times300\sim310{\mu}m$크기로 활발히 신축 운동하는 성숙한 유충으로 발육되었다. 자연산 이매패에서 Acanthopayphium tyosenense의 피낭유충 기생율은 동죽 $99.5\%$, 맛조개 $76.3\%$, 바지락 $37\%$이었고, 피낭유 충의 부위별 기생율은 동죽의 경우 검출된 피낭유충 총 18,064개중 족부 근육 $62.9\%$ (11,368개), 아가미 $23.6\%$ (4,258개), 내장낭$13.5\%$ (2,435개)의 기생율을 나타냈다. 피낭유충은 숙주 종이나 크기와 관계없이 나타났다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.