• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.2
• /
• pp.275-283
• /
• 2006

Experiment and three dimensional numerical investigations of incompressible turbulent flow through square channels with one- and two-sided ribbed walls are performed to determine pressure drop and heat transfer. The CFX(version 5.7) software package is used for the computation. The ribbed walls have a $45^{\circ}$ inclined square rib. Uniform heat flux is maintained on whole inner heat transfer channel area. The numerical results coincide with experimental data that obtained for $7,600{\le}Re{\le}24.900$, the pitch-to-rib height ratio (p/e) of 8.0. and the rib height-to-channel hydraulic diameter ratio ($e/D_h$) of 0.0667. The results show that values of local heat transfer coefficient and friction factor in the channel with two-sided ribbed wall are higher than those in the channel with one-sided ribbed walls.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.73-84
• /
• 2001

The purpose of this study is to apply fundamental data of impression formation research by analysing and observing the various facial image that can be effected from hair style as well as be helpful for choosing suitable hair style for T.P.O in modern society. This study targeted 305 college women in Daegu and Gyung-book area. Hair Style Image Scale(HSIS)was used the scale of seven point modified the S-D(Semantic Differential) method. The analysis of impression formation effect of hair style using SPSS WIN package have completed from the principal component analysis by Varimax perpendicular rotation method and ANOVA was used to recognize the difference in impression formation according to hair style change. In the case of statistical difference was appeared, LSD post-verification was applied for that. The conclusions of this study is as followed ; 1. The factors of impression formation effected by hair style were classified as goodwill factor, refinement factor, elegance factor and individuality factor. 2. In terms of goodwill factor, long hair style showed highest level and short cut hair, bobbed hair in an order. In refinement factor, there was no difference between short cut hair and bobbed hair and both of them was higher than long hair. In elegance factor, long hair was highest and bobbed hair was lowest. In individuality factor, short cut hair and bobbed hair higher than long hair and no difference between short cut hair and bobbed hair.

• Journal of Power System Engineering
• /
• v.10 no.1
• /
• pp.34-40
• /
• 2006

The snow melting system by electric heating wires which is adopted in this study is a part of road facilities to keep surface temperature of the road higher than freezing point of water for melting the snow accumulated on it. The system is designed to increase traffic safety and capacity. The electric heating wires are buried under paved road at a certain depth and operated automatically and manually. Design theory, amount of heating, and installation standard vary according to economic situation, weather condition, and installation place where the system applies. It is tried to figure out that the appropriate range of required heat capacity and installation depth and intervals for solving snowdrifts and freezing problems with the minimum electric power consumption. The most important factors to design the system are calculation of heating capacity depending on weather condition and depth and interval of the electric heating wires depending on air condition respectively. The study were performed under the range of the air temperatures($-2^{\circ}C,\;-5^{\circ}C,\;-8^{\circ}C$), the intervals of the electric heating wires(70mm, 100mm, 125mm), and the installation depths(50mm, 70mm, 100mm). The ready made commercial program package was used to verify the experimental results.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1813-1824
• /
• 2022

This paper shows the verification work of SARAX code system in the reactor core transient calculation based on the simplified EBR-II Benchmark. The SARAX code system is an analysis package developed by Xi'an Jiaotong University and aims at the advanced reactor R&D. In this work, a neutron-photon coupled power calculation model and a spatial-dependent reactivity feedback model were introduced. To verify the models used in SARAX, the EBR-II SHRT-45R test was simplified to an ULOF transient with an input flowrate change curve by fitting from reference. With the neutron-photon coupled power calculation model, SARAX gave close results in both power fraction and peak power prediction to the reference results. The location of the hottest assembly from SARAX and reference are the same and the relative power deviation of the hottest assembly is 2.6%. As for transient analysis, compared with experimental results and other calculated results, SARAX presents coincident results both in trend and absolute value. The minimum value of core net reactivity during the transient agreed well with the reported results, which ranged from -0.3$ to -0.35$. The results verify the models in SARAX, which are correct and able to simulate the in-core transient with reliable accuracy.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.2
• /
• pp.59-64
• /
• 2013

In-situ annealing tests of Cu/Ni/Au/Sn-Ag/Cu micro-bump for 3D IC package were performed in an scanning electron microscope chamber at $135-170^{\circ}C$ in order to investigate the growth kinetics of intermetallic compound (IMC). The IMC growth behaviors of both $Cu_3Sn$ and $(Cu,Ni,Au)_6Sn_5$ follow linear relationship with the square root of the annealing time, which could be understood by the dominant diffusion mechanism. Two IMC phases with slightly different compositions, that is, $(Cu,Au^a)_6Sn_5$ and $(Cu,Au^b)_6Sn_5$ formed at Cu/solder interface after bonding and grew with increased annealing time. By the way, $Cu_3Sn$ and $(Cu,Au^b)_6Sn_5$ phases formed at the interfaces between $(Cu,Ni,Au)_6Sn_5$ and Ni/Sn, respectively, and both grew with increased annealing time. The activation energies for $Cu_3Sn$ and $(Cu,Ni,Au)_6Sn_5$ IMC growths during annealing were 0.69 and 0.84 eV, respectively, where Ni layer seems to serve as diffusion barrier for extensive Cu-Sn IMC formation which is expected to contribute to the improvement of electrical reliability of micro-bump.

• Journal of Food Hygiene and Safety
• /
• v.29 no.1
• /
• pp.21-25
• /
• 2014

Formaldehyde and phenol used in the production of melamine-wares may be intended to come into foodstuffs. So this study investigated the migration of formaldehyde and phenol from 222 articles Articles were cups(14), bowls(75), plates(85), spoons(10), chopsticks(4), food trays(8), rice paddles(4), spatulas(9) and scoops(12). The food stimulants were 4% acetic acid, 20% ethanol, distilled water and n-heptane. Korea regulation (Standards and specifications for food utensils, containers and package) specifies migration limits for formaldehyde and phenol in food stimulants. Formaldehyde and phenol are restricted by 4 mg/L, 5 mg/L respectively. In all cases the migration of formaldehyde and phenol were below the limit set in Korea regulation. The level of formaldehyde and phenol migrated to food simulants were in the range of N.D~2.949 mg/L, N.D~0.078 mg/L respectively. These migration results of formaldehyde and phenol will provide a scientific basis for the safety management of melamine-wares.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.381-381
• /
• 2010

$(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films as gate dielectrics have been proposed to overcome the problems of tunneling current and degradation mobility inachieving a thin equivalent oxide thickness. An extremely thin $SiO_2$ layer is used in order to separate the carrier in MOSFET channel from the dielectric field fluctuation caused by phonons in the dielectric which decreases the carrier mobility. The electronic and optical properties influenced the device performance to a great extent. $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric films on p-Si (100) were grown by atomic layer deposition method, for which the conduction band offsets, valence band offsets and band gapswere obtained by using X-ray photoelectron spectroscopy and reflection electron energy loss spectroscopy. The band gap, valence and conduction band offset values for $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ dielectric thin film, grown on Si substrate were about 5.34, 2.35 and 1.87 eV respectively. This band alignment was similar to that of $ZrO_2$. In addition, The dielectric function (k, $\omega$), index of refraction n and the extinction coefficient k for the $(ZrO_2)_{0.66}(HfO_2)_{0.34}$ thin films were obtained from a quantitative analysis of REELS data by comparison to detailed dielectric response model calculations using the QUEELS-$\varepsilon$(k, $\omega$)-REELS software package. These optical properties are similar with $ZrO_2$ dielectric thin films.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.31-38
• /
• 2010

In this study, it is suggested that it has to reliability-based design methodology with respect to bridge structure-rail longitudinal interaction and bridge structure-vehicle interaction. For the structural analysis, commercial package, ABAQUS, are used for a three-dimensional finite element analysis. The optimization process utilizes a well-known optimizer, ADS(Automated Design Synthesis). Optimization technique is utilized the ALM-BFGS method for global area search and Golden Section Method for 1-D search. In general, ALM-BFGS method don't need the 1-D search, and that algorithm converge a 0.1~0.2 of Push-Off factor. But in this study, value of Push-Off factor is used 90, therefore 1-D search should be needed for effective convergency. That algorithm contains the "heuristic decision method". As a result of optimum design of 2-main steel girder birdge with 5${\times}$(1@50m), design methodology suggested in this study was demonstrated more economic and efficient than existing design and LCC optimization not considering bridge-rail longitudinal interaction and bridge-vehicle interaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.153-162
• /
• 2016

The aim of this study was to estimate the prevalence of the metabolic syndrome risk factors for adults in the general population, understand the relationship of each factor with the obesity indicators, and examine the relevance and validity for predicting the metabolic syndrome in obese indicators. The study subjects were 1,051 adults aged 20 years and over, who underwent a health package check-up at the Korea Association of Health Promotion, D-branch from Feb. to Nov. 2014. As a result, the prevalence rates of metabolic syndrome of the study subjects were 21.5%, and the prevalence rates of the metabolic risk factors were as follows: 31.8% of men and 41.6% of women for abdominal obesity; 35.6% of men and 17.3% of women for TG; 17.6% of men and 34.2% of women for HDL-C; 53.5% of men and 35.9% of women for blood pressure; and 14.9% of men and 6.8% of women for FBS. The prevalence rates of metabolic syndrome were significantly higher in the older age group, in the group with the higher BMI, and in the group of higher level of drinking frequency. In the predictive indicators of obesity on metabolic syndrome risk factors, the waist / height ratio was higher than other indicators. Conclusively, WHtR appeared to be a useful indicator to show abdominal obesity and is better in selecting metabolic syndrome patients compared to other obesity indicators.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.3
• /
• pp.45-50
• /
• 2005

A UV camera is being used in various application regions such as industry, medical science, military, and environment monitoring. A ROIC(ReadOut IC) is developed and can read the responses from UV photodiode sensors which are made with III-V nitride semiconductors of GaN series haying high resolution and high efficiency. To design FPA(Focal Plane Array) UV $8{\times}8$ ROIC, the photodiode type sensor devices are modeled as the capacitor type ones. The ROIC reads out signals from the detector at)d outputs sequentially pixel signals after amplifying and noise filtering of them. The ROIC is fabricated using the $0.5{\mu}m$ 2Poly 3Metal N-well CMOS process. And then, it and photodiode array are hybrid bonded by gold stud bumping process using ACP(Anisotropic Conductive Paste). After the packaging, UV images appearing on PC verified the operations of the ROIC.