• 제목/요약/키워드: 2.5D mesh

검색결과 139건 처리시간 0.027초

측편형어류에 대한 트롤 끝자루의 망목선택성 (The Mesh Selectivity of Trawl Cod-end for the Compressed From Fishes)

  • 정순범;이주희;김삼곤
    • 수산해양기술연구
    • /
    • 제29권4호
    • /
    • pp.247-259
    • /
    • 1993
  • The fishing experiment was carried out by the training ship Saebada in order to analyse the mesh selectivity for trawl cod-end, in the Southern Korea Sea and the East China Sea from June. 1991 through August, 1992. The trawl cod-end used in this experiment has the trouser type of cod-end with cover net. and the mesh selectivity was examined for the five kinds of the opening of mesh in its cod-end part. A total of 163 hauls, of which having mesh size 51.2mm ; A 89, 70.2mm ; B 54, 77.6mm ; C 55, 88.0mm ; D 52 and 111.3mm ; E 20 were used respectively. Selection curves and selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b)) ). The mesh election master curves were estimated by S=1/(1+exp super(-[a(L/M)+$\beta$]) ). and the optimum mesh size were calculated with (L/M) sub(50) of master curve. In these cases 'a' and '$\alpha$' are slope, 'b' and '$\beta$' are intercept. 'L' is body length of the target species of fishes, 'M' is the mesh size, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and 'S' denotes mesh selectivity. In this report, the four species of compressed form fishes were taken analized according to fish shape, and the results obtained are summarized as follows: 1. Red seabream Pagrus major(Temminct et Schlegel) and yellow porgy Dentex tumifrons(Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 97.5%, 91.4%, 76.7% and 57.8% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 2.65 and -28.62, 4.40 and -77.73, 2.31 and -46.99, and their selection factors were 1.39, 2.10, 1.83 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.05 and -5.65 respectively, and (L/M) sub(50) was 1.85. The optimum mesh size of Red seabream was 141mm. 2. Filefish Thamnaconus modestus (Gunther) ; Selection rate in each mesh size of A, B, C, D and E were 99.6%, 98.3%, 91.2%, 80.0% and 48.6% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 5.82 and -55.10, 2.92 and -36.90, 3.91 and -63.09, and their selection factors were 1.35, 1.44, 1.45 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.02 and -4.32 respectively, and (L/M) sub(50) was 1.43. The optimum mesh size was 129mm. 3. Target dory Zeus faber Valenciennes ; Selection rate in each mesh size of A, B, C, D and E were 99.7%, 100%, 83.2%, 91.6% and 65.0% respectively. Selection parameters 'a' and 'b' of mesh sizes C, D and E were 3.85 and -32.46, 4.19 and -57.38, 2.45 and -40.03, and their selection factors were 1.09, 1.56, 1.47 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 2.64 and -3.53 respectively, and (L/M) sub(50) was 1.34. The optimum mesh size was 127mm. 4. Butterfish Psenopsis anomala (Temminct et Schlegel) ; Selection rate in each mesh size of A, B, C, D and E were 99.2%, 34.1%, 46.5%, 14.3% and 2.4% respectively. Selection parameters 'a' and 'b' of mesh sizes B, C and D were 5.35 and -71.70, 5.07 and -69.25, 3.31 and -62.06 and their selection factors were 1.91, 1.75, 2.13 respectively. Selection parameters of master curve '$\alpha$' and '$\beta$' were 3.16 and -6.24 respectively, and (L/M) sub(50) was 1.98. The optimum mesh size was 71mm.

  • PDF

Noise reduction for mesh smoothing of 3D mesh data

  • Hyeon, Dae-Hwan;WhangBo, Taeg-Keun
    • International Journal of Contents
    • /
    • 제5권4호
    • /
    • pp.1-6
    • /
    • 2009
  • In this paper, we propose a mesh smoothing method for mesh models with noise. The proposed method enables not only the removal of noise from the vertexes but the preservation and smoothing of shape recognized as edges and comers. The magnitude ratio of 2D area and 3D volume in mesh data is adopted for the smoothing of noise. Comparing with previous smoothing methods, this method does not need many iteration of the smoothing process and could preserve the shape of original model. Experimental results demonstrate improved performance of the proposed approach in 3D mesh smoothing.

사각형강목의 끝자루를 이용한 트롤어구의 어획선택성 연구 ( 2 ) - 다이아몬드형강목과 사각형강목의 선택성비교 - ( Studies on the Selectivity of the Trawl Net With the Square Mesh Cod-End ( 2 ) - Comparison of Diamond and Square Mesh Cod-End - )

  • 김삼곤;이주희;박정식
    • 수산해양기술연구
    • /
    • 제30권3호
    • /
    • pp.172-181
    • /
    • 1994
  • The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.

  • PDF

미세 사각홀을 갖는 플라스틱 부품의 정밀사출성형해석 (Precision Injection Molding Analysis of Plastic Part with Rectangular Micro-Holes)

  • 이성희;정태성;허영무
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.436-441
    • /
    • 2005
  • In this study, precision injection molding analysis for BGA connector fabrication was performed. A BGA connector model with rectangular micro-holes were introduced to investigate the effect of mirco patterns on the injection molding process. Dual domain(2.5D) mesh and full 3D mesh for BGA connector model were prepared to perform precision injection molding analysis. To verify the Present analysis, experiments of injection molding were performed based on the results of the analysis. It was shown that the type of mesh has a significant effect on the flow pattern of BGA connector

  • PDF

의복패턴을 위한 2.5D 맵핑 시스템의 설계 및 구현 (Design and Implementation of 2.5D Mapping System for Cloth Pattern)

  • 김주리;정석태;정성태
    • 한국정보통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.611-619
    • /
    • 2008
  • 본 논문에서 구현한 2.5D 맵핑(mapping) 시스템은 다양한 질감과 패턴에 따른 패션 의상의 모델 사진 이미지를 그대로 살려 외각선 영역 위에 드레이핑(draping)함으로써 새로운 디자인을 창출할 수 있고, 직접 샘플이나 시제품을 제작하지 않고도 시뮬레이션만으로 의상 작품을 확인할 수 있다. 또한 원단 디자인과 최종 제품의 상태를 정확하게 예측할 수 있는 기능을 제공하며, 원단과 모델 사진 이미지의 데이터베이스 구축으로 쉽고 빠르게 드레이핑함으로써 패션 업계의 경쟁력 향상과 비용 절감 효과를 가져 올 수 있다. 2.5D 맵핑 시스템은 보다 자연스러운 드레이핑을 위하여 메쉬 워프 알고리즘 모듈, 명암 추출과 적용 모듈, 맵핑 영역 추출 모듈, 메쉬 생성과 변형 모듈, 2.5D 맵핑 모듈로 구성하여 구현하였다. 향후 연구과제는 2.5D 맵핑 시스템의 구현 기술을 기반으로 하여 3D 의복 기술과 3D 인체 구현 기술을 접목한 3D 패션 디자인 시스템을 연구하여 2.5D 맵핑 기술의 표현 한계를 극복할 계획이다.

3차원 인체 형상을 이용한 20대 여성의 하반신 전개패턴에 관한 연구 (2D Lower Body Flat Pattern of the Women in Their Twenties Using 3D Scan Data)

  • 윤미경;남윤자;최경미
    • 한국의류학회지
    • /
    • 제31권5호
    • /
    • pp.692-704
    • /
    • 2007
  • Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

Interference Analysis in an Urban Mesh Network Operating in the 60-GHz Band

  • Rasekh, Maryam Eslami;Farzaneh, Forouhar
    • ETRI Journal
    • /
    • 제35권5호
    • /
    • pp.775-785
    • /
    • 2013
  • Because of their exclusive features, millimeter wave directive mesh networks can be considered for small cell backhaul support in urban environments. For this purpose, a network of closely spaced stations has been considered with very directive line-of-sight links operating in the 60-GHz band. An attempt is made to evaluate channel response and interference behavior in such a network, taking into account the effect of building blockage. A simple grid of building blocks is considered as the propagation environment, and wave propagation is simulated using 2.5-dimensional (2.5D) ray tracing (2D with ground effect) to calculate the received signal at different nodes in the network. The results are compared with free space predictions and used to evaluate interference at all nodes in the channel and describe certain characteristics of links, such as the delay profile and the correlation length.

헤어라인 교정 시술을 위한 웹기반 얼굴 3D 모델링 (Web-based 3D Face Modeling System for Hairline Modification Surgery)

  • 이상욱;장윤희;정은영
    • 한국콘텐츠학회논문지
    • /
    • 제11권11호
    • /
    • pp.91-101
    • /
    • 2011
  • 이 연구는 헤어라인 교정을 위한 웹 베이스의 3D 얼굴 모델링 구축을 목적으로 하고 있다. 미(美)에 대한 현대사회의 얼굴에 대한 관심은 광범위한 개인의 모바일 스마트 ICT 기기의 시대와 함께 의료 정보 시스템의 필요성 역시 급격하게 증가하고 있다. 이 연구는 기존의 기술의 독점과 배포 가능한 3D 모델링 라이브러리 구축을 시도하려 한다. 우리는 실험 결과를 통하여 새로운 웹 베이스 표준 개발을 위한 문제점 및 요구사항을 찾을 수 있었다. 우리는 우리의 실험과 관련 기술에 관한 문헌 검토에 따른 새로운 시스템을 제안하고자 한다. 우리가 제안하고자 하는 시스템의 주된 특징은 의과학, 미용학과 정보 기술을 기반으로 한 탈모 치료에 대한 연구이다. 이 시스템은 2D 정면 이미지를 3D mesh-data와 함께 얼굴 모델링을 진행한다. 이 mesh-data는 SVG를 포합한 웹 표준 기술과 HTML5에 의해 기본적으로 지원되는 Canvas Tag와 호환이 된다.

Quadrilateral Mesh Generation on Trimmed NURBS Surfaces

  • Chae, Soo-Won;Kwon, Ki-Youn
    • Journal of Mechanical Science and Technology
    • /
    • 제15권5호
    • /
    • pp.592-601
    • /
    • 2001
  • An automatic mesh generation scheme with unstructured quadrilateral elements on trimmed NURBS surfaces has been developed. In this paper NURBS surface geometries in the IGES format have been employed to represent geometric models. For unstructured mesh generation with quadrilateral elements, a domain decomposition algorithm employing loop operators has been modified. As for the surface meshing, an indirect 2D approach is proposed in which both quasi-expanded planes and projection planes are employed. Sampled meshes for complex models are presented to demonstrate the robustness of the algorithm.

  • PDF

음의 포아송비 거동 격자체로 보강한 시멘트 복합체의 인장특성 평가 (Evaluation of Tensile Characteristics of Cementitious Composites Reinforced by Auxetic Mesh)

  • 김원우;이장화;문재흠
    • 한국건설순환자원학회논문집
    • /
    • 제5권2호
    • /
    • pp.192-197
    • /
    • 2017
  • 콘크리트를 포함한 일반적인 재료는 외부 하중의 작용 시 양의 포아송비 거동을 가진다. 한편, 격자시스템에 있어서는 음의 포아송비 거동을 가지도록 제작할 수 있다. 이에 본 연구에서는 이중화살촉 형식의 2차원 음의 포아송비 격자체를 제작하여 역학적인 거동을 검토하였다. 또한 이러한 음의 포아송비 격자체로 보강한 시멘트 모르타르 복합체의 직접인장시험을 수행하였으며, 실험결과는 일반 격자체를 적용한 경우와 비교하였다. 연구 결과, 음의 포아송비 거동 격자체를 적용한 경우 복합체의 하중 직교방향의 변형을 구속하는 효과가 일반 격자체보다 더 효과적임을 보여주었다.