• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.599-604
• /
• 2021

In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, efficiency and performance of 2.4 and 5GHz band which leads to saturation of the communication was significantly fall. In this paper, we studied the design and fabrication of slot patch antenna to be used in wireless communication systems operating at around 10GHz band. To obtain optimal antenna parameters such as patch size, inter patch space, sL, sW, feed L, feed w, slot patch antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, slot and patch antenna is fabricated using FR-4 substrate of dielectric constant 4.4. The characteristics of fabricated antenna were analyzed by network analyzer. The fabricated slot patch antenna showed a center frequency as 10.23GHz, the minimum return loss as -32dB, and -10dB bandwidth as 420MHz respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.505-513
• /
• 1996

In this paper the dual-mode bandpass filters with a Chebyshev response are designed and manufactured at Ku-band as well as K-band. Manufactured filters are resonated by two independent orthogonal $TE_{113}$ circular-cavity modes and characterized by 4-pole Chebyshev function. One is operating at a center frequency of 12.5GHz with a bandwidth of 100MHz and the other, a center frequency of 19.25GHz with 120MHz, respectively. The measureed experimental results of a 12.5GHZ dual-mode filter ahve a 1.2dB intertion loss in the passband and 65dB out-of-rejection, and a 19.25GHz filter has a 1.55dB insertion loss and 70dB out-of-rejection. These experimantal results shoults show good agreements with the design specifications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.183-187
• /
• 2004

An inverted-F antenna for wireless local area network(WLAN) is presented. The proposed design is based on the typical dual-band planar inverted-F antennas(PIFA), which have two tunable resonant modes. The low-profile antenna is built by stamping and designed to be mounted on the metal frame of the laptop LCD panel. The obtained antenna can perform in 2.4 GHz and 5 GHz bands and be adopted for other wireless applications. All the measurements are performed in the actual test fixture.

• Composites Research
• /
• v.15 no.2
• /
• pp.18-23
• /
• 2002

The absorption and the interference shielding of the problems thor both commercial and military purposes. In this study, the minimization of the electromagnetic wale reflections using composite layers with different dielectric properties was performed. Dielectric constants were measured for glass/epoxy composites containing conductive carbon blacks and carbon/epoxy fabric composites. Using the measured permittivities of the composites having various carbon black contents, the optimal electromagnetic wave absorbing structure in X-band(8.2GHz-12.4GHz) was determined. The optimal multi-layered composite plates have the thickness of 2.6mm. The maximum reflection loss is -30dB at 10GHz, and the bandwidth haying the absorptivity lower than -l0dB is about 2GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2018

In this paper, we propose a film-type dual-band frequency selective structure for improving the wireless communication environment in a building. The proposed frequency-selective structure is a miniaturized structure that can control the resonant frequencies of 2.4 GHz and 5 GHz dual band through simple design parameters. We fabricated the frequency-selective surface by screen printing using conductive ink on a thin transparent film and confirmed its performance by measurement. We analyzed the attenuation performance of the unnecessary signal from the outside when the frequency-selective structure designed using the software to analyze the propagation environment performance is applied to the building. To verify the analytical results, the signal strength of the indoor environment was measured by applying the frequency-selective film fabricated on the inner wall of the actual building. The measurement results show that the dual-band frequency-selective film has 29.4 dB and 15.94 dB attenuation performance in the 2.4 GHz and 5 GHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.333-341
• /
• 2015

In this paper, a 0.5~4 GHz frequency synthesizer having good phase noise performance is proposed. Wideband output frequencies of the synthesizer were synthesized using DDS(Direct Digital Synthesizer) and analog direct frequency synthesis technology in order to obtain fast settling time. Also in order to get good phase noise performance, 2.4 GHz DDS clock was generated by VCO(Voltage Controlled Oscillator) which was locked by the 100 MHz reference oscillator using SPD(Sample Phase Detector). The phase noise performance of wideband frequency synthesizer was estimated and the results were compared with the measured ones. The measured phase noise of the frequency synthesizer was less then -121 dBc @ 100 kHz at 4 GHz.

• Journal of electromagnetic engineering and science
• /
• v.15 no.4
• /
• pp.245-249
• /
• 2015

In this paper, a low-profile dipole array antenna with monopole-like radiation for on-body communications is proposed. The proposed antenna, operating in the industrial, scientific, and medical (ISM) band, is designed with consideration of the human body effect. By placing eight planar dipole antenna elements symmetrically around the z-axis, the proposed antenna achieves monopole-like radiation characteristics with a low profile. The antenna has overall dimensions of $0.44{\lambda}_0{\times}0.44{\lambda}_0{\times}0.013{\lambda}_0$ at 2.45 GHz in the ISM 2.45 GHz band (2.4-2.485 GHz) and a 10-dB return loss bandwidth of 4.9% ranging from 2.4 to 2.52 GHz.

• Journal of Advanced Navigation Technology
• /
• v.16 no.2
• /
• pp.227-233
• /
• 2012

This paper presents a bandpass fitler of GPS and WLAN band based on LTCC. The structure of bandpass fitler consists of a Butterworth lowpass fitler and highpass filter using CRLH (Composite Right/Left-Handed) transmission line. Using green sheet with dielectric constant 7.2, we fabricated the bandpass filter that satisfied GPS and WLAN band characteristics. We are implemented the bandpass filter at center frequency 1.5 GHz (GPS) and 2.4 GHz (WLAN). Its insertion loss are 1.66 dB at GPS and 3.20 dB at WLAN respectively.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.171-176
• /
• 2013

A microstrip-fed miniaturized folded-slot antenna that is cut at the finite ground plane edge for the size reduction is proposed as a ZigBee module operating in the 2.4 GHz frequency band, as specified by the IEEE standard 802.15.4. The antenna is fabricated within space limited to $35mm{\times}9mm$ on a $35mm{\times}35mm$ substrate, which is about the PCB size of a typical wireless ZigBee module. The measured impedance bandwidth and antenna gain are 2.37~2.49 GHz and 2.4 dBi respectively. The measured radiation patterns are similar to conventional folded-slot antennas and are also stable across the pass band. These properties and its compact structure help in making the antenna suitable for ZigBee module.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.4 s.33
• /
• pp.7-11
• /
• 2004

In this paper, a $\lambda$/4 hairpin resonator is applied to reduce the size of planar resonators for a 2.4 GHz Band LTCC MLC bandpass filter. The $\lambda$/4 hairpin resonator operates as stepped impedance resonator (SIR) without changing the width of the planar resonator. It is composed of two sections those are parallel coupled line and transmission line. The characteristic impedance of two sections is different each other. The design formulas of the bandpass filter using the coupling element at the arbitrary position are derived from even and odd-mode analysis. The formulas can take account of the arbitrary coupling of lumped and/or distributed resonators. The advantage of this filter is its abilities to change freely the coupling structure between two resonators. Experimental bandpass filters for 2.4 GHz Band are implemented and their performances are shown.