• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.440-443
• /
• 2007

In this paper, microstrip antenna is designed for industrial-scientific-medical(ISM)band of S-Band. We proposed that radiation element of antenna, which is rectangle patch shape. The feeding structure used L-shaped structure. Center frequency and -l0dB bandwidth are investigated by change of length and width in patch plane. And maximum gain, front to back ratio and 3dB beam width is presented by simulation radiation pattern of antenna in frequency ISM Band. The center frequency is 2.45GHz, band width is $2.314{\sim}2.577GHz$ with 263MHz(11%). And the antenna maximum gain is 9.3dBi, 3dB beam width E-plane is $52.5^{\circ}$, H-plane is $64.7^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.235-245
• /
• 2005

In this paper, a novel Ultra-Wideband(UWB) antenna fed by CPW is designed, fabricated, and measured for UWB communications. We have used the Microwave Studio of CST to simulate the proposed antenna. It is designed to work on a substrate TMM4 of thickness 0.762 mm and relative permittivity 4.5. The proposed antenna is satisfied with Ultra-Wideband communication band from 3.1 GHz to 11.5 GHz, for VSWR$\leq$2, and isolated IEEE 802.1la frequency band(5.15 GHz$\~$5.825 GHz) using a rectangular slot. Measured group delay variation is less than 1 ns, thus indicating the proposed antenna a good candidate for UWB applications.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.46-51
• /
• 2013

In this paper, a dual-band antenna is proposed for the RF power harvester system as well as RFID tag. The proposed antenna operates as the passive and active RFID tag antenna in the UHF and microwave band, respectively. In addition, to charge the battery of an active RFID tag in the microwave band, it harvest the RF signal for tagging from the passive RFID tag antenna in the UHF band. The proposed antenna operates in the UHF band (917~923.5 MHz) and microwave band (2.4~2.45 GHz). In order to obtain the dual-band operation, the dipole structure and meander parasitic elements are proposed as the ${\lambda}/2$ and $1{\lambda}$ dipole antenna, respectively. The radiating dipole structure in the microwave band acts as the coupled feed for the meander parasitic elements in the UHF band. The impedance bandwidth (VSWR < 2) of the proposed antenna covers 917~923.5 MHz (UHF band) and 2.4~2.45 GHz (Microwave band). Measured total efficiencies are over 45 % in the UHF band and over 70 % in the microwave band. Peak gains are over 0.18 dBi and 2.8 dBi in the UHF and microwave band with an omni-directional radiation pattern, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1839-1842
• /
• 2009

This paper describes a K-band microstrip patch antenna suitable for an adaptive cruise control(ACC) system. The presented transmitting and receiving patch antennas are designed with $1{\times}2$ array. The antennas are simulated using CST MWS and manufactured using RO-4003(h=0.5mm, ${\epsilon}r=3.38$). The antennas are installed on the backside of the sensor circuit and measured. The estimated gain and beamwidth are 8.5dBi and about $50^{\circ}$ respectively. The measured bandwidth is about 1GHz($VSWR{\le}2$) which satisfies the desired specification.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.7-16
• /
• 1999

Stoichiometric and nonstoichiometric $Y_{3-x}Fe_{5+x}O_{12})$ polycrystalline samples (x=0.00, 0.05, 0.10, 0.30, -0.05, -0.10, -0.30) were prepared by solid state reaction method. The magnetic properties of the sample were investigated by FMR (ferromagnetic resonance) technique at microwave frequency 5.11 GHz (G-band) and 23.39 GHz (K-band) respectively. The spectroscopic splitting factor g were estimated to be 2.04~2.35 from the derivative absorption lines. As the samples became yttrium $(Y^{3+})$ excess and iron $(Fe^{3+})$ excess, Magnetizations were decreased. But resonance linewidth were increased. To investigate the anisotropy, the angular dependence of resonance magnetic fields were measured. Angular dependence of effective magnetizations were measured by FMR from 77 K to 300 K at K-band microwave frequency (23.39 GHz) and the saturation magnetizations were measured by VSM. The Bloch coefficients B and C were determined by fitting. $M_{eff}(0)$ was obtained by the extrapolation from 80 K. From this result, the spin wave stiffness constant D $(about\; 162~206 \;eV{\AA}^2)$and average square range of exchange interaction $$$(about \;5.84~12.13\;{\AA}^2)$ were determined.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.761-768
• /
• 2017

In this paper, to implement the electromagnetic wave environment and solve electromagnetic compatibility(EMC) problem, miniaturization of ultra-wide band log periodic dipole antenna for measurement was investigated. In addition, in oder to improve the signal-to-noise ratio in high frequency band, balun was connected to the antenna to stabilize the operation of the differential mode antenna and the single mode coaxial cable. To minimize the total size and to increase bandwidth of the antenna, a fat dipole structure was used for the resonance frequency band below 4 GHz and a general dipole shape was used for that above 4 GHz. The bandwidth of the proposed antenna was represented from 0.6 GHz to 8.0 GHz with a ratio bandwidth of 12.3 : 1. Measured peak gain varies from 5.7 dBi to 9.1 dBi, and a half power beamwidth was presented from $29.4^{\circ}$ to $100.2^{\circ}$ in operating range.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.11
• /
• pp.1245-1250
• /
• 2015

In this paper, a compact CPW-fed antenna for 2.45 GHz band WLAN applications is presented. The proposed antenna which has a geometry of folded stub and slot is fabricated into an inexpensive FR-4 substrate that has a dielectric constant of 4.2 and a thickness of 1.0 mm with optimized parameters obtained by simulation, and then measured. From measured result, we confirmed available operation as antenna for WLAN applications by obtaining the return loss level of < -10 dB in the frequency band of 2.4-2.484 GHz.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.34-41
• /
• 2003

In this paper, 60GHz band transmitter and receiver for wireless LAN are designed and implemented using the broband amplifier and mixer fabricated by standard 0.1${\mu}{\textrm}{m}$ MIMIC process of MINT. Output power and gain of the RF transmitter are 0 ㏈m and 1.7㏈, respectively. Noise figure and gain of the receiver are 4.2㏈ and l5.7dB, respectively. Considering the sensitivity and LOS test, this system can communicate with BER of below than 10$^{-6}$ at a distance more than 35m. DSSS, which is strong for concealment and disturbance, is adopted.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.77-81
• /
• 2002

This paper demonstrates a CMOS downconversion mixer for 2.4GHz ISM band applications. The mixer, implemented in a 0.18um CMOS process, is based on the CMOS Gilbert Cell mixer, With a 2.5GHz local oscillator and a 2.45GHz RF input, the measurement results exhibit power conversion gam of -6dB, IIP3 of -6dBm, input $P_{-1dB}$ of -15 dBm, and power dissipation in mixer core of 2.7 mW with 0㏈m LO power and 1.8V supply voltage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.47-53
• /
• 2003

In this paper we proposed a novel dual-band compact folded patch antenna with the same linear polarizations and high isolation characteristic between the two frequency range. The antenna is loaded with a high permittivity dielectric material in order to reduce the antenna size and open circuit stubs are used in order to broaden the bandwidth. The fractional bandwidths of the optimized antenna with demensions 4 mm${\times}$3 mm${\times}$5 mm are 3.0 % at 5.6 GHz band and 2.8 % at 5.8 GHz band, respectively. The isolation characteristic between the two ports is less than -26 dB within the operating frequency range.