• 제목/요약/키워드: 2-universal

검색결과 2,012건 처리시간 0.023초

도시유역에 대한 토사유출량 모의기법 적용성 검토 (Application of Sediment Yield Estimation Methods for an Urbanized Basin)

  • 손광익;노진욱
    • 한국수자원학회논문집
    • /
    • 제42권9호
    • /
    • pp.737-745
    • /
    • 2009
  • 국내 도시화 시험유역에 대한 기존 토사유출공식의 적용 가능성을 검토하기 위해 도시 시험유역의 실측자료와 모의기법 적용결과를 비교.분석하였다. 적용된 토사유출량 산정 모의공식으로는 개정범용토양손실공식(RUSLE - Revised Universal Soil Loss Equation), 수정범용토양손실공식(MUSLE - Modified Universal Soil Loss Equation)을 활용하였다. 시험유역은 유역면적 약 3.81 $km^2$로 면적대비 56 % 정도가 도로 및 포장 등으로 도시화가 진행된 도시 시험유역을 선정하여 자동 강우 및 수위계측기를 이용하여 지난 3년간 연속적으로 수문자료를 축적하였다. 또한 계측지점에서의 유출량별 소류사 및 부유사 실측을 통하여 유량-유사량 관계곡선을 개발한 후 호우사상별 유역으로 부터의 토사유출량을 산정하였다. 실측된 강우 및 유량 자료를 활용하여 모의한 토사유출량과 실측한 토사유출량을 비교한 결과 RUSLE를 적용한 모의결과가 실측 토사유출량과 근접한 결과를 제시하였으나 상관계수가 낮아 적용에 세심한 주의가 요구됨을 알 수 있었다. 반면, 실제 유출수문곡선을 MUSLE기법에 적용하여 모의한 토사유출량과 실측 토사유출량의 상관관계는 우수한 예측결과를 보였으나 보정계수의 적용이 필요함을 확인하였다.

Comparison of bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and a universal adhesive

  • Lee, Ji-Yeon;Ahn, Jaechan;An, Sang In;Park, Jeong-won
    • Restorative Dentistry and Endodontics
    • /
    • 제43권1호
    • /
    • pp.7.1-7.7
    • /
    • 2018
  • Objectives: The aim of this study is to compare the shear bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and universal adhesive. Materials and Methods: Fifty zirconia blocks ($15{\times}15{\times}10mm$, Zpex, Tosoh Corporation) were polished with 1,000 grit sand paper and air-abraded with $50{\mu}m$ $Al_2O_3$ for 10 seconds (40 psi). They were divided into 5 groups: control (CO), Metal/Zirconia primer (MZ, Ivoclar Vivadent), Z-PRIME Plus (ZP, Bisco), Zirconia Liner (ZL, Sun Medical), and Scotchbond Universal adhesive (SU, 3M ESPE). Transbond XT Primer (used for CO, MZ, ZP, and ZL) and Transbond XT Paste was used for bracket bonding (Gemini clear ceramic brackets, 3M Unitek). After 24 hours at $37^{\circ}C$ storage, specimens underwent 2,000 thermocycles, and then, shear bond strengths were measured (1 mm/min). An adhesive remnant index (ARI) score was calculated. The data were analyzed using one-way analysis of variance and the Bonferroni test (p = 0.05). Results: Surface treatment with primers resulted in increased shear bond strength. The SU group showed the highest shear bond strength followed by the ZP, ZL, MZ, and CO groups, in that order. The median ARI scores were as follows: CO = 0, MZ = 0, ZP = 0, ZL = 0, and SU = 3 (p < 0.05). Conclusions: Within this experiment, zirconia primer can increase the shear bond strength of bracket bonding. The highest shear bond strength is observed in SU group, even when no primer is used.

Bonding of the silane containing multi-mode universal adhesive for lithium disilicate ceramics

  • Lee, Hyun-Young;Han, Geum-Jun;Chang, Juhea;Son, Ho-Hyun
    • Restorative Dentistry and Endodontics
    • /
    • 제42권2호
    • /
    • pp.95-104
    • /
    • 2017
  • Objectives: This study evaluated the influence of a multi-mode universal adhesive (MUA) containing silane (Single Bond Universal, 3M EPSE) on the bonding of resin cement to lithium disilicate. Materials and Methods: Thirty IPS e.max CAD specimens (Ivoclar Vivadent) were fabricated. The surfaces were treated as follows: Group A, adhesive that did not contain silane (ANS, Porcelain Bonding Resin, Bisco); Group B, silane (S) and ANS; Group C, hydrofluoric acid (HF), S, and ANS; Group D, MUA; Group E, HF and MUA. Dual-cure resin cement (NX3, Kerr) was applied and composite resin cylinders of 0.8 mm in diameter were placed on it before light polymerization. Bonded specimens were stored in water for 24 hours or underwent a 10,000 thermocycling process prior to microshear bond strength testing. The data were analyzed using multivariate analysis of variance (p < 0.05). Results: Bond strength varied significantly among the groups (p < 0.05), except for Groups A and D. Group C showed the highest initial bond strength ($27.1{\pm}6.9MPa$), followed by Group E, Group B, Group D, and Group A. Thermocycling significantly reduced bond strength in Groups B, C, and E (p < 0.05). Bond strength in Group C was the highest regardless of the storage conditions (p < 0.05). Conclusions: Surface treatment of lithium disilicate using HF and silane increased the bond strength of resin cement. However, after thermocycling, the silane in MUA did not help achieve durable bond strength between lithium disilicate and resin cement, even when HF was applied.

지방정부의 아동친화 도시 조성을 위한 아동권리 강화 방안 : 보편적 복지로서의 아동복지패러다임의 변환 (Plans to Strengthen Children's Rights for the Creation of Child Friendly Cities by Local Governments: The Conversion of Child Welfare Paradigms into Universal Welfare)

  • 최선경
    • 문화기술의 융합
    • /
    • 제5권2호
    • /
    • pp.313-319
    • /
    • 2019
  • 최근 아동친화 도시 조성을 위한 광역자치단체와 기초자치단체의 정책이 다양하게 전개되고 있다. 본 연구는 지역사회의 이슈로 떠오르고 있는 아동친화도시에 대한 논의가 보편적 복지로서의 아동복지 차원에서 어떠한 함의를 갖고 있으며, 이를 어떠한 방향으로 적용할 수 있는지에 관해 논의하고자한다. 이를 위해 본 연구는 크게 3가지 부분으로 구성된다. 첫째, 아동친화도시의 정신이자 기본토대를 이루고 있는 UN아동권리협약 내용을 살펴보고 이를 통해 보편적 복지로서의 아동복지 패러다임을 고찰한다. 둘째, 현대적 의미의 아동친화도시가 구성된 역사적 기원과 아동친화도시의 주요 특성을 살펴보고 셋째, 이상의 내용을 바탕으로 아동친화 도시 조성을 위한 아동권리 강화 방안을 모색해 보고자 한다.

일방향 도청 불가능한 채널만을 이용하여 전체검증과 매표방지를 제공하는 새로운 전자선거 기법 (A New Universally Verifiable and Receipt-free Electronic Voting Scheme Using Only One-way Untappable Channels)

  • 조진현;김상진;오희국
    • 정보보호학회논문지
    • /
    • 제13권2호
    • /
    • pp.49-61
    • /
    • 2003
  • 공정하고 투명한 전자선거를 이루기 위해서는 비밀성(Privacy), 선거권(eligibility) 등과 함께 전체검증(universal verifiability)과 매표방지(receipt-freeness) 속성이 반드시 제공되어야 한다. 그러나 매표방지와 전체검증은 상반되는 의미를 지니고 있어 두 가지 특성을 모두 만족시키는 것은 어렵다. 지금까지 제안된 전자선거 기법을 살펴보면 둘 중 한가지 특성만을 제공하거나 두가지 특성을 제공하는 경우 계산량이 많아 실용적이지 못하다. 이 논문에서는 매표방지와 전체검증을 제공하면서 효율적인 전자선거 기법을 제안한다. 이 기법은 최소한의 물리적 가정인 일방향 도청 불가능한 채널(one-way untappable channel)을 가정하고, 준동형 암호화(homorphic encryption) 기법을 이용한다. 유권자는 HR(Honest Randomizer)과 대화를 통해서 투표지를 구성하고, 이것이 유효하다는 증명과 함께 투표지를 게시판에 게시한다. 제안하는 기법은 일방향 도청 불가능한 채널을 가정하는 기법 중에서 계산량이 가장 적으며, 기존의 전체검증과 매표방지를 제공하는 기법보다 약한 물리적 가정을 사용한다. 새 시스템의 안전성 분석과 관련 시스템과의 성능 비교분석도 다룬다.

유니버설디자인 관점에서 이동약자를 위한 안경원 출입구 편의시설 실태조사 - 서울특별시를 중심으로 (The Field Investigation of Optical Shop Entrance Facilities for the Mobility Impairment from the Universal Design - Focused on Seoul Metropolitan City)

  • 유삼영;이세희;한진용;김영빈;최문성
    • 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
    • /
    • 제29권1호
    • /
    • pp.7-19
    • /
    • 2023
  • Purpose: Mobility impairment persons are all people who experience mobility difficulties in their daily lives, which makes up about 30% of the population in Seoul Metropolitan City; this number is expected to increase with population aging. As the number of mobility impairment persons in need of vision correction increases, it is necessary to create the Universal Design guidelines and to provide the foundation to access convenience facilities at the entrance of optical shops, a health and medical institution. Methods: Of the 2,282 optical shops located in Seoul, 252 optical shops were chosen for data collection of actual photos, from April 10, 2022 to September 4, 2022. Based on the photographs, the height difference between the entrance and the sidewalk, safety handles, and opening and closing methods of entrances were investigated, as these factors correspond to the accessibility and the mobility of the mobility impairment persons. Results: Of the 252 optical shops surveyed, 114 (45.2%) have resolved the problems of height difference through improving horizontal accessibility (61) or using ramps (53). 36 (14.3%) optical shops chose automatic doors for opening and closing methods of the entrance. Implications: The rate of installation of access convenience facilities for the entrance of optical shops is slightly lower than the rate of installation of ramps, surveyed by the Ministry of Health and Welfare. It is necessary to apply the Universal Design to access convenience facilities for the entrance of optical shops for not only the mobility impairment persons but all people, regardless of age or ability, to conveniently access healthcare services.

Calcium Silicate-based 재료에 대한 수 종 상아질 접착제의 전단결합강도 비교 (Shear Bond Strength Comparison of Different Adhesive Systems to Calcium Silicate-based Materials)

  • 신현옥;김미선;남옥형;이효설;최성철;김광철
    • 대한소아치과학회지
    • /
    • 제45권4호
    • /
    • pp.445-454
    • /
    • 2018
  • 이 연구의 목적은 Calcium silicate를 기반으로 한 2종의 치수복조재 (Biodentine, RetroMTA)와 임상에서 사용되는 여러 가지 상아질 접착제 간의 전단결합강도를 비교 평가하는 것이다. 중심구를 가진 아크릴 레진 블록 80개를 제작하고 2그룹으로 나누어 Biodentine (BD)과 RetroMTA (RMTA)를 중심구 안에 채운 후, 무작위로 10개씩 4개의 하위군을 나누어 재료 상방에 4가지 상아질 접착제인 Clearfill SE (CSE), AQ bond plus (AQ), All bond universal (ABU) 자가부식, ABU 일괄부식을 도포한 뒤 그 위에 복합레진을 적용하였다. Universal testing machine을 이용해 전단결합 강도를 측정하였다. 통계분석은 Kruskal-Wallis를 사용하였고 Mann-Whitney의 사후검정을 하였다. 연구결과, BD - ABU 자가부식군이 가장 높은 전단결합강도를, RMTA - AQ 군이 가장 낮은 전단결합강도를 보였다. ABU 일괄부식과 ABU 자가부식군, ABU 일괄부식과 CSE 간의 유의미한 차이는 보이지 않았다. 또한 같은 상아질접착제 적용 시, BD가 RMTA보다 높은 전단결합강도를 보였다. 또한, BD와 RMTA 그룹 군에서 ABU 자가부식군 도포 후, 레진 적용했을 때 향상된 전단결합강도를 보였다.

새로 개발된 8세대 접착제의 적용 방법에 따른 유치에서의 전단결합강도와 미세누출 (Influence of Application Method on Shear Bond Strength and Microleakage of Newly Developed 8th Generation Adhesive in Primary Teeth)

  • 유원정;박호원;이주현;서현우
    • 대한소아치과학회지
    • /
    • 제46권2호
    • /
    • pp.165-172
    • /
    • 2019
  • 이 논문의 목적은 기능성 모노머를 함유한 8세대 접착제의 적용시간 감소와 인산 산부식 여부가 유치에서 접착능에 미치는 영향을 평가하는 것이다. 80개의 우식이 없는 유구치를 선정하였고, 접착제의 종류에 따라서 2그룹으로 분류하였다(G-premio bond, Single bond universal). 각 그룹은 적용 시간와 인산 산부식 여부에 따라서 그룹당 10개씩, 총 4개의 하위그룹으로 추가 분류하였다. 각 하위그룹은 절반으로 나누어, 5개의 시편은 전단결합강도 측정 후 주사전자현미경을 촬영하여 파절양상을 확인하였고, 다른 5개의 시편은 미세누출을 측정하였다. G-premio bond는 적용시간와 인산 산부식 여부에 따른 결합강도와 파절양상, 미세누출의 유의한 차이가 관찰되지 않았다. Single bond universal은 적용시간을 길게 한 경우가 적용시간이 짧은 경우에 비해서 유의하게 높은 전단결합강도를 보였다(p = 0.014). 모든 그룹에서 나타난 전단결합강도는 임상적으로 허용 가능한 전단결합강도인 17 MPa 보다 높았다. G-premio bond는 인산 산부식 없이 적용시간을 줄여서 사용하는 방법이 가능하다.

Multistatic Field또는 3차원 공용보상체를 사용한 유방의 방사선 조사법의 평가 (Improved Breast Irradiation Techniques Using Multistatic Fields or Three Dimensional Universal Compensators)

  • 한영이;조재호;박희철;추성실;서창옥
    • Radiation Oncology Journal
    • /
    • 제20권1호
    • /
    • pp.24-33
    • /
    • 2002
  • 목적 : 유방보존 수술 후 행하는 방사선치료인 2문 대칭조사(two tangential field technique)시 나타나는 선량분포의 불균일성을 효과적으로 개선하기 위하여, multistatic fields의 사용법과 공용보상체 사용법을 제시하고 평가하였다. 대상 및 방법 : 1) Multistatic field 방법 3차원의 치료계획용 software (RTP)를 이용하여, wedge를 사용한 2문 대칭 조사의 최적의 치료계획을 시행한 후 beam's eye view상에서 과조사가 일어나는 부분을 가리워 주도록 blocked field를 설계하고, 그 beam에 대칭되는 beam을 만들었다. 기존의 2개의 tangential field와 추가된 field의 weighting을 최적의 선량분포를 갖도록 조절하였다. 2) 공용보상체 사용법 : 1999와 2000년에 본원에서 whole-breast radiotherapy를 받은 환자 20명의 유방의 크기를 측정하고 평균하여 표준 유방 모델을 만들었다. 이 모델에 대하여 공용보상체를 설계하고, 설계된 공용보상체의 geometry를 RTP에 입력한 후 환자의 치료 계획을 수행하였다. 2문 대칭조사 치료 계획과, multistatic fields의 경우 그리고 공용 보상체를 사용한 경우의 치료계획에서의 불균일도(DII : 처방선량의 $95-105\%$를 벗어나는 PTV의 부피의 백분율), 최대선량 값$(D_{max})$ 그리고 등가선량 곡선을 각각 비교하였다. 결과 : Multistatic field 방법은 DII의 평균값을 $14.6\%$ (p value<0.000) 낮추고 $D_{max}$$4.7\%$ (p value<0.000) 낮춤으로써, 전통적인 2문 대칭 조사법보다 우수한 방법으로 확인되었다. 반면에 공용보상체의 사용은 평균 DII를 $3.7\%$ 낮추지만(p value=0.260) 평균 $D_{max}$는 거의동일 하여($0.3\%$ 감소, p value=0.867), 전통적인 방법보다 우수성이 크게는 없는 것으로 평가되었다. 그러나 환자의 체곡선이 보상체와 잘 일치하는 경우에는 DII가 $18\%$까지 감소하였다. 결론 : Multistatic field 방법은 모든 환자에 대하여 선량분포의 균일성을 전반적으로 향상시키는 효과적인 방법으로 평가되는 반면 공용보상체의 사용은 보상체의 크기가 환자의 체 윤곽과 잘 일치하는 경우만 효과적으로, 적용의 범위에는 한계가 있는 방법으로 평가되었다.