• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.336-343
• /
• 2019

Wet direct-seeding (WDS) is an important method for improving the competitiveness of rice production in South Korea. We analyzed the optimum direct-seeding date to establish the rice standing rate in each area and selected suitable areas for WHS by considering the heading stage limit date for improving cultivation safety. As a result, the rice direct-seeding date to control weedy rice was around 5.15, 5.17-5.19, and after 5.20 in southern Youngnam, southern Honam, and the Middle Coast areas, respectively. However, the optimum seeding date for good standing rice was in late March in most areas. Analyzing by area, most of the southern plains and parts of the central inland plain are suitable for WHS. However, most parts of Gwangwon-do, and the northern parts of Chungbuk, Gyeongbuk, and Yeonghonam areas are not suitable for WHS, and should therefore avoid WHS.

• Economic and Environmental Geology
• /
• v.3 no.1
• /
• pp.25-34
• /
• 1970

Very few articles are available on geologic structure and genesis of Sangdong scheelite-deposits in spite of the fact that the mine is one of the leading tungsten producer in the world. Sangdong scheelite deposits, embedded in Myobong slate of Cambrian age at the southem limb of the Hambaek syncline which strikes $N70{\sim}80^{\circ}W$ and dips $15{\sim}30^{\circ}$ northeast, comprise six parallel veins in coincide with the bedding plane of Myobong formation, namely four footwall veins, a main vein, and a hangingwall vein. Four footwall veins are discontinuous and diminish both directions in short distance and were worked at near surface in old time. Hangingwall vein is emplaced in brecciated zone in contact plane of Myobong slate and overlying Pungchon limestone bed of Cambrian age and has not been worked until recent. The main vein, presently working, continues more than 1,500 m in both strike and dip sides and has a thickness varying 3.5 to 5 m. Characteristic is the distinct zonal arrangement of the main vein along strike side which gives a clue to the genesis of the deposits. The zones symmetrically arranged in both sides from center are, in order of center to both margins, muscovite-biotite-quartz zone, biotite-hornblende-quartz zone and garnet-diopside zone. The zones grade into each other with no boundary, and minable part of the vein streches in the former two zones extending roughly 1,000 m in strike side and over 1,100 m in dip side to which mining is underway at present. The quartz in both muscovite-biotite-quartz and biotite-hornblende-quartz zones is not network type of later intrusion, but the primary constituent of the special type of rock that forms the main vein. The minable zone has been enriched several times by numerous quartz veins along post-mineral fractures in the vein which carry scheelite, molybdenite, bismuthinite, fluorite and other sulfide minerals. These quartz veins varying from few centimeter to few tens of centimeter in width are roughly parallel to the main vein although few of them are diagonal, and distributed in rich zones not beyond the vein into both walls and garnet-diopside zone. Ore grade ranges from 1.5~2.5% $WO_3$ in center zone to less than 0.5% in garnet-diopside zone at margin, biotite-hornblende-quartz zone being inbetween in garde. The grade is, in general, proportional to the content of primary quartz. Judging from regional structure in mid-central parts of South Korea, Hambaek syncline was formed by the disturbance at the end of Triassic period with which bedding thrust and accompanied feather cracks in footwall side were created in Myobong slate and brecciated zone in contact plane between Myobong slate and Pungchon limestone. These fractures acted as a pathway of hot solution from interior which was in turn differentiated in situ to form deposit of the main vein with zonal arrangement. The footwall veins were developed along feather cracks accompanied with the main thrust by intrusion of biotite-hornblende-quartz vein and the hangingwall vein in shear zone along contact plane by replacement. The main vein thus formed was enriched at later stage by hydrothermal solutions now represented by quartz veins. The main mineralization and subsequent hydrothermal enrichments had probably taken place in post-Triassic to pre-Cretaceous periods. The veins were slightly displaced by post-mineral faults which cross diagonally the vein. This hypothesis differs from those done by previous workers who postulated that the deposits were formed by pyrometasomatic to contact replacement of the intercalated thin limestone bed in Myobong slate at the end of Cretaceous period.

• Korean Journal of Environmental Biology
• /
• v.31 no.4
• /
• pp.275-287
• /
• 2013

The Japanese anchovy Engraulis japonicus is a widespread species in the western North Pacific and major fishery resource. To understand the spatio-temporal variation of anchovy prey items in the coastal waters of southern Korea, the stomach contents of anchovy and the structure of the zooplankton community were analysed at three sites (Jindo, Yeosu and Tong-yeong) from July 2011 to February 2012. The main prey items in Yeosu and Jindo were cyprid stage of barnacle (>35%) and copepod Calanus sinicus (>22%) in July, respectively, while, predominant ones in Tongyeong were small copepods, Paracalanus parvus s.l. (41%) and Corycaeus affinis (22%). During this period, the dominant zooplankton were cladoceran Evadne tergestina (39%) in Yeosu, small copepod, P. parvus s.l. (28%) in Jindo and cladoceran E. tergestina (14%) in Tongyeong. The dominant prey items were barnacle larvae and copepods in summer, phytoplankton and Pseudodiaptomus marinus in autumn and P. parvus s.l. and cold water copepod, Centropages abdominalis in winter. Anchovy prefer the prey item C. sinicus (3%) over E. tergestina (39%), which was a dominant species in the catching site in summer. P. marinus (0.5%) and C. abdominalis (0.9%) were preferred over P. parvus s.l. (30%, 21%) in autumn and winter, respectively. Prey items varied with area and season in the coastal waters of southern Korea. These results suggest that the prey selectivity of anchovy showed high flexibility and adaptability in the study waters.

• 보존과학연구
• /
• s.32
• /
• pp.5-24
• /
• 2011

Neunghwaji(Embossed patterned paper) is a unique paper used for a traditional book cover in Korea. The research was carried out to investigate Neunghwaji's features. Physical property was studied through a test of tensile strength and folding endurance. Also, comparative analysis of virus resistance and waterproof ability was undertaken on Neunghwaji. 1. Folding endurance test showed that strength of non-embossed CB and HB decreased during deteriorating duration. Embossed CN and HN showed the strength increasing at early stage and decreasing from the 27th day of the deteriorating duration. Tensile strength was decreasing in both cases as deterioration progressed. 2. Growth of Arthrinium sp. fungus on embossed paper was 10% less than plain paper while Cladosporium sp. showed 20~30% less growth. Amur cork dyeing(H) showed 10~30% lower fungi growth than Gardenia seed dyeing(C). The result indicated that embossed paper has better virus resistance than Hanji, and Amur cork dyeing has better virus resistance than Gardenia seed dyeing. 3. Average contact angle of CN, CB, HN, and HB was $85{\sim}92^{\circ}$ and NON-N and NON-B was $59{\sim}63^{\circ}$. In detail, CN's contact angle was $1{\sim}7^{\circ}$ higher than CB's; HN was $1{\sim}6^{\circ}$ higher than HB. Therefore, it was found that embossed paper has higher contact angle than Hanji thus the former has better waterproof ability. The research suggested production technique of Neunghwaji and studied its features related to the technique. Neunghwaji was confirmed to have superior quality to Hanji though further study regarding above test result is needed to complement the research.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.333-343
• /
• 2003

This experiment was carried out to improve the utilization of liquid pig manure (LPM) for rice at the two textures of valley soil in 2000 and 2001. The soil textures were coarse loamy and fine loamy in Sachon and Jisan series, respectively. Treatments consisted of no fertilized plot, chemical fertilized plot, LPM 150%, LPM 100%, LPM 100%+NK (top dressing) 30%, LPM 70%+NK 30%, LPM 50%+NK 50% plot. LPM was applied as basal fertilizer compare to nitrogen of chemical fertilized plot. Total N contents in the LPM were 6.0 and $4.5g\;kg^{-1}$ in 2000 and 2001, respectively. After the experiment, P and K contents of soils were not difference between chemical and LPM application plots. But heavy metal contents in soils were slightly higher in LPM application plots than in chemical fertilized plot. Immediately after LPM application, ammonia gas content was $18mg\;kg^{-1}$ in LPM 150% plot, but it was $3mg\;kg^{-1}$ in LPM 50% plot. Two days after LPM application, ammonia gas content was 3 times higher in coarse loamy than in fine loamy soil. After rotary tillage, ammonia gas was not detected at all LPM treatments. This result suggests that rotary tillage can reduce the nasty smell of LPM quickly. Inorganic nitrogen, $NO_3$ and $NH_4$, contents in water of paddy was higher at coarse loamy soil from rice transplanting to tillering stage. After that season, inorganic nitrogen contents of water were not different according to soil texture and treatments. Content of $NH_4-N$ in soil solution was higher at LPM plots than chemical fertilizer plot. Total nitrogen contents in rice plant after harvesting were higher at chemical fertilization plot than LPM application plot, but K contents showed an opposite tendency. Rice yield was decreased only in LPM plots at two soil textures. But yield was not significantly difference between chemical fertilizer and LPM+top dressing plots at coarse loamy soil and increased 5% at LPM 50%+NK 50% plot at fine loamy soil in 2001.

• Korean Journal of Weed Science
• /
• v.5 no.1
• /
• pp.50-55
• /
• 1985

Effects of weed removal time on maize growth and yield were evaluated in the fields dominated with Poligonum spp., Chenopodium album, Echinochloa crusgalli and Digitaria adsendens from 1982 to 1983 in Suweon. Weed removal treatments were as follows: (a) kept weedfree all season, (b) weeded at 10 day intervals after maize emergence but stopped weeding at 3,5,7,9 leaf stages, (c) weeds initially removed at 3,5,7 and 9 leaf stages and the plots then kept weed free, (d) weeds left all season. Maize kept weed free from maize emergence to 7 leaf stages showed no grain yield reduction due to competition from weeds emerging later, but weeding from emergence to 3 and 5 leaf stages reduced grain yield 46 and 44%, respectively, in 1982 and 29 and 18%, respectively, in 1983. Weeding at 3 leaf stage and thereafter did not influence grain yield but initial weedings at 5, 7 and 9 leaf stages reduced grain yield 10, 36, and 67%, respectively, in 1982 and 14,18, and 21%, respectively, in 1983. Responses of maize to weeding time in the dry matter yields were same as in the grain yields.

• Korean Journal of Weed Science
• /
• v.31 no.4
• /
• pp.360-367
• /
• 2011

The use of green manure crop is one of the methods for alternative of chemical fertilizer as well as maintain of soil sustainability, therefore we evaluated the effect of green manure crops on rice growth and weed occurrence in rice-green manure crop double cropping system. The treatments consisted of incorporation of hairy vetch, barley or combined hairy vetch and barley without any agrochemical or fertilizer. In hand weeding, rice yield in hairy vetch only or hairy vetch and barley incorporated fields was attained by 90% and 93% of the conventional practice, respectively, while the value in barley incorporated fields was just 79%. Although the rice yields were lower than the hand weed control, similar trends in non-weed control were observed among all treatments. At maximum tillering stage, occurred weeds in hairy vetch, barley or hairy vetch and barley incorporated fields were five, five and two species, respectively, while those in conventional practice were six species. Also, the dry weight of weeds in hairy vetch and barley incorporated fields was decreased by 33% and 53% compared to it of conventional practice, while the value in hairy vetch and barley incorporated field was increased by 34%. Among all treatments, although occurrence density of Echinochloa crus-galli was lower than another weed species, the dry weight of it significantly increased. These results suggested that although continuous incorporation of proper amount of legume green manure crops was possible to productivity insurance of crop, but to attain it was essential to the effective management of weeds.

• Asia pacific journal of information systems
• /
• v.23 no.2
• /
• pp.21-39
• /
• 2013

As the utilization of information technology and the turbulence of technological change increase in organizations, the adoption of IT outsourcing also grows to manage IT resource more effectively and efficiently. In this new way of IT management technique, service level management(SLM) process becomes critical to derive success from the outsourcing in the view of end users in organization. Even though much of the research on service level management or agreement have been done during last decades, the performance of the service level management process have not been evaluated in terms of final objectives of the management efforts or success from the view of end-users. This study explores the relationship between SLM maturity and IT outsourcing success from the users' point of view by a analytical case study in four client organizations under an IT outsourcing vendor, which is a member company of a major Korean conglomerate. For setting up a model for the analysis, previous researches on service level management process maturity and information systems success are reviewed. In particular, information systems success from users' point of view are reviewed based the DeLone and McLean's study, which is argued and accepted as a comprehensively tested model of information systems success currently. The model proposed in this study argues that SLM process maturity influences information systems success, which is evaluated in terms of information quality, systems quality, service quality, and net effect proposed by DeLone and McLean. SLM process maturity can be measured in planning process, implementation process and operation and evaluation process. Instruments for measuring the factors in the proposed constructs of information systems success and SL management process maturity were collected from previous researches and evaluated for securing reliability and validity, utilizing appropriate statistical methods and pilot tests before exploring the case study. Four cases from four different companies under one vendor company were utilized for the analysis. All of the cases had been contracted in SLA(Service Level Agreement) and had implemented ITIL(IT Infrastructure Library), Six Sigma and BSC(Balanced Scored Card) methods since last several years, which means that all the client organizations pursued concerted efforts to acquire quality services from IT outsourcing from the organization and users' point of view. For comparing the differences among the four organizations in IT out-sourcing sucess, T-test and non-parametric analysis have been applied on the data set collected from the organization using survey instruments. The process maturities of planning and implementation phases of SLM are found not to influence on any dimensions of information systems success from users' point of view. It was found that the SLM maturity in the phase of operations and evaluation could influence systems quality only from users' view. This result seems to be quite against the arguments in IT outsourcing practices in the fields, which emphasize usually the importance of planning and implementation processes upfront in IT outsourcing projects. According to after-the-fact observation by an expert in an organization participating in the study, their needs and motivations for outsourcing contracts had been quite familiar already to the vendors as long-term partners under a same conglomerate, so that the maturity in the phases of planning and implementation seems not to be differentiating factors for the success of IT outsourcing. This study will be the foundation for the future research in the area of IT outsourcing management and success, in particular in the service level management. And also, it could guide managers in practice in IT outsourcing management to focus on service level management process in operation and evaluation stage especially for long-term outsourcing contracts under very unique context like Korean IT outsourcing projects. This study has some limitations in generalization because the sample size is small and the context itself is confined in an unique environment. For future exploration, survey based research could be designed and implemented.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.227-235
• /
• 2015

Food-Health indicators have been developed and utilized internationally in the 'Food' domain of environment and health indicators. In Korea, however, Food Safety Health Indicators which are in the introductory stage had been developed separately from Environmental Health Indicators. The aim of the current study is to suggest feasible applications of the domestic Food Safety Health Indicators as a case study. We introduced 3 possible applications which are as follows: 1) production of two types of Integrated Food Safety Health Index; 2) conduction of correlation analysis between the Integrated Food Safety Health Index and Food Safety Health Indicators; 3) conduction of regression analysis to evaluate the relationship between the Integrated Food Safety Health Index and socioeconomic status. As a result, we provided the calculated Integrated Food Safety Health Index I and Integrated Food Safety Health Index II, which represents the regional food safety level in relative and absolute terms, respectively. Integrated Food Safety Health Index I was significantly correlated with the outbreaks of food-borne diseases (caused by Campylobacter jejuni, Bacillus cereus, Salmonella spp. and unknown cause) and incidence of E.coli infections. Integrated Food Safety Health Index II significantly decreased as the proportion of foreigners and women increased, and increased as the population density increased. Utilization of such Integrated Food Safety Health Indicators may be helpful in understanding the overall domestic food safety level and identifying the indicators which must be considered with priorities to enhance the food safety levels regionally and domestically. Furthermore, analyzing the association between Integrated Food Safety Health Index and factors other than food safety could be useful in conducting risk management and identifying susceptible populations. Food Safety Health Indicators can be useful in other applications, and may serve as a supporting material in establishing or modifying policy plans to enhance food safety. Therefore, keen interests by researchers accompanied by further studies on food safety health indicators are needed.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.53-62
• /
• 2017

Electric power which is the energy source of economy and industries requires long distance transportation due to regional difference between its production and consumption, and it is supplied through the multi-loop transmission and distribution system. Prior to its actual use, electric power flows through several transformations by voltage transformers in substations depending on the characteristics of each usage, and a transformer has the structure consisting of the main body, winding wire, insulating oil and bushings. A transformer fire that breaks out in substations entails the primary damage that interrupts the power supply to houses and commercial facilities and causes various safety accidents as well as the secondary economic losses. It is considered that causes of such fire include the leak of insulating oil resulting from the destruction of bottom part of bushings, and the chain reaction of fire due to insulating oil that reaches its ignition point within 1 second. The smoke detector and automatic fire extinguishing system are established in order to minimize fire damage, but a difficulty in securing golden time for extinguishing fire due to delay in the operation of detector and release of gas from the extinguishing system has become a problem. Accordingly, this study was carried out according to needs of active mechanism to prevent the spread of fire and block the leak of insulating oil, in accordance with the importance of securing golden time in extinguishing a fire in its early stage. A bushings fireproof structure was developed by applying the high temperature shape retention materials, which are expanded by flame, and mechanical flame cutoff devices. The bushings fireproof structure was installed on the transformer model produced by applying the actual standards of bushings and flange, and the full scale fire test was carried out. It was confirmed that the bushings fireproof structure operated at accurate position and height within 3 seconds from the flame initiation. It is considered that it could block the spread of flame effectively in the event of actual transformer fire.