• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.39-50
• /
• 2022

The Purpose of this study was to confirm the effects of Active learning application on thecritical thinking disposition, problem-solving ability, and self-leadership of nursing students in the online health assessment practice course in the COVID-19 pandemic situation. Data collection was conducted from September 1st to December 17th, 2021 for 78 nursing students in the Department of Nursing at University D, and the collected data was analyzed using the SPSS/WIN 20 program. As a result of this study, the critical thinking disposition (t=-2.11 p=.038) and self-leadership (t=-2.07 p=.042) were statistically significantly increased after active learning was applied to the online nursing health assessment practice class. SOAP, Outcome-Present-Test(OPT) worksheet, clinical reasoning webs, mind map writing are confirm to improve critical thinking disposition, problem solving ability, self-leadership of nursing student, so research to confirm the effect in face to face classed should be conducted.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.707-720
• /
• 1999

The purpose of this study was to evaluate racial differences In head posture and the influence of head posture to the craniofacial morphology. The sample group of this study was made up of 51 Korean males and 120 Scandinavian Caucasian males. From the comparison of the cranio-cervical angle and the variables of craniofacial morphology between them, the following results were obtained. 1. The cranio-cervical angle (NSL/OPT) was on average 9.28 degrees larger In Koreans. 2. The length of the anterior cranial base (N-S) was on average 4.66mm shorter in Koreans. 3. The length of the maxillary base (sp-pm and ss-pm) were on average 2.75mm and 4.65mm shorter in Koreans respectively, the anterior maxillary height (n-sp) was on average 2.60mm longer, the posterior dimension (s-pm) was found to be 2.06mm longer in Koreans, and the maxillary inclination (NSL/NL) was identical in both samples. 4. The mandibular body length (pg-tgo) and ramus height (ar-tgo) were identical in the two groups, but the genial angle (ML/RL) was 3.22 degrees smaller and the mandibular plane inclination (NSL/ML) was 2.44 degrees larger in Koreans 5. The maxillary prognathism (s-n-sp and s-n-ss) and the mandibular prognathism (s-n-sm) were identical in both samples. 6. The sagittal jaw relationship (ss-n-pg) was 1.44 degrees larger in the Korean sample, but the vortical jaw relationship (NL/ML) was not significantly different. 7. The anterior facial height (n-gn) was 5.57mm longer in the Korean sample. 8. The mandibular alveolar prognathism (CL/ML) was 5.71 degrees greater and the interincisal angle (ILs/ILi) was 3.08 degrees more acute in Koreans. Taken together these results, craniofacial morphology can be influenced by the head posture defined by cranio-cervical angulation.

• Journal of Chest Surgery
• /
• v.50 no.4
• /
• pp.247-254
• /
• 2017

Background: Hybrid coronary revascularization (HCR) was developed to combine the advantages of coronary artery bypass graft (CABG) with percutaneous coronary intervention (PCI). However, it is still controversial whether it is more optimal to perform CABG or PCI first. The purpose of this study was to compare the clinical outcomes of these 2 approaches. Methods: Eighty patients who underwent HCR from May 2010 to December 2015 were enrolled in this retrospective analysis. The CABG-first group comprised 12 patients and the PCI-first group comprised 68 patients. Outcomes of interest included in-hospital perioperative factors, major adverse cardiac and cerebrovascular events (MACCEs), and the incidence of repeated revascularization, especially for the target vessel lesion. Results: No significant difference was found in the amount of postoperative bleeding (p=0.239). The incidence of MACCEs was similar between the CABG-first and PCI-first groups (1 of 12 [8.3%] vs. 5 of 68 [7.4%], p>0.999). Repeated revascularization was performed on 3 patients (25%) in the CABG-first and 9 patients (13.2%) in the PCI-first group (p=0.376). Conclusion: There were no significant differences in postoperative and medium-term outcomes between the CABG-first and PCI-first groups. Based on these results, it can be inferred that it is safe to opt for either CABG or PCI as the primary procedure in 2-stage HCR.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.162-175
• /
• 2008

Gyeongju, which was the central city of the ancient civilization at Silla Kingdom, has various kinds of stone cultural properties. It is significantly important to preserve historical sources of Korea. However, recent air quality data measured in Gyeongju did not show good air quality level. In order to investigate variation of the concentration of the air pollutants with meteorological condition, an air quality monitoring and an aerosol sampling were conducted during the intensive monitoring period in Gyeongju. Impacts of the meteorological factors on the air pollutants were also analyzed based on the air mass pathway categories using HYSPLIT model and the local wind patterns using MM5 model. The prevailing air mass pathways were classified into four categories as following; category I affected by easterly marine aerosols, category II affected by northwesterly continental aerosols, category III affected by southwesterly continental aerosols, and category IV affected by northerly continental aerosols. The concentrations of the air quality standards were relatively lower during the fall intensive monitoring period. At that time, the easterly marine air mass pattern was dominated. The seasonal average mass concentration of $PM_{10,Opt}$, which optically measured at the monitoring site, was the highest value of $77.6{\pm}28.3\;{\mu}g\;m^{-3}$ during the spring intensive monitoring period but the lowest value of $20.1{\pm}5.3\;{\mu}g\;m^{-3}$ during the fall intensive monitoring period. The concentrations of $SO_2$ and CO were relatively higher when the air mass came from the northwestern continent or the northern continent. The concentrations of ${SO_4}^{2-}$ and ${NO_3}^-$ increased under the northwesterly continental condition. It was estimated that the acidic aerosols were dominated in the atmosphere of Gyeongju when the air mass came from the continental regions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.1-10
• /
• 2003

The purpose of this study was to verify the shore margin protection effect of a root system developed from direct sticking of Salix gracilistyla Miq., focusing on the reinforcement of soil shear strength. The materials were 20cm long sticks whose average diameter and weight were 7.52mm and 14.58g respectively, and sandy loam(Sand 60.36%, Silt 28%, Clay 11.64%), whose maximum dry weight(${\gamma}$$_{dmax}$) was 1.59gf/㎤ at the water ratio( $W_{opt}$) 13.8%. The direct shearing test(KS F 2343) was applied to cylindric columms(diameter 132mm) of pure soil and two years old root reinforced soil. At each condition of vertical stress, 10N/$ extrm{cm}^2$, 14.41N/$\textrm{cm}^2$ and 18.82 N/$\textrm{cm}^2$, five soil+root columns were sheared. After shear tests, the root area ratio and soil moisture on the shear plane were measured. The results of this research were as follows: 1. The average of root area ratio was 1.86% and the soil moisture 14.67%. 2. Two years old root system was found to increase the soil shear strength of pure soil in terms of Cohesion(C) and Inner friction Angle($\phi$) as follows. 3. The relationship between root area ratio and the increased shear strength can be presented with the following equation, $\Delta$S ≒ 0.33ㆍ TrㆍAs/A $\Delta$S : Increased Shear Strength Tr : Average Tension Strength of Root, Ar/A : Root Area Ratioioage Tension Strength of Root, Ar/A : Root Area Ratio

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.89-98
• /
• 2011

This study examined the energy performance according to the main design parameters of a solar water heating system for an office building using the life cycle cost (LCC) optimization simulations. The LCC optimization simulations of the system were conducted with TRNSYS and GenOpt employing the Hooke-Jeeves algorithm for cases where water temperature was $60^{\circ}C$ and $50^{\circ}C$. The results showed that for water temperature at $60^{\circ}C$ and $50^{\circ}C$ the global radiation incident on the collector could be decreased by 16.98% and 28.52%, collector useful energy gain could be decreased by 15.04% and 22.59%, energy to load from storage tank could be decreased by 10.86% and 18.06% and AH energy to load could be increased by 16.86% and 38.50% respectively compared to a non-optimized system. The annual average collection efficiency of the collector was increased by 0.88% for $60^{\circ}C$ and 2.78% for $50^{\circ}C$ because of increase of collector slope and decrease of the mass flow rate per collector area. The annual average efficiency of the system was increased by 1.74% and 3.47% compared to the basis system. However, the annual solar fraction of the system was decreased by 6.68% for $60^{\circ}C$ and 11.26% for $50^{\circ}C$ due to decrease of collector area and storage tank volume.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.432-439
• /
• 2013

This study was performed to assess the current stock condition of elkhorn sculpin along the Uljin area in the East Sea of Korea. To assess the state of the stock, yield-per-recruit (YPR) and spawning biomass-perrecruit (SBPR) analyses were performed. Estimates of $F_{max}$ and $F_{0.1}$ were 2.10/year and 0.48/year, respectively, and those of $F_{35%}$ and $F_{40%}$ were 0.66/year and 0.54/year, respectively. Current fishing mortality was estimated at 0.63/year and the current age at first capture was 2.41years. $F_{40%}$ was set as the target reference point of the stock. SBPR at $F_{40%}$ and current SBPR were estimated to be 41.85g and 37.77g, respectively. Estimated FOTY which is the fishing mortality for the overfished threshold yield was 0.49/year. The ratio of SBPR/$SBPR_{MSY}$ was calculated as 0.90 and that of $F/F_{OTY}$ was 1.05. The ratio of $t_c/t_{c\;opt}$ was calculated as 1.15 and that of $F/F_{OTY}$ was 1.17. Therefore, the current stock condition of elkhorn sculpin along the Uljin area of Korea has not been overfished, however, it indicates that a light overfishing is going on this stock.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.2
• /
• pp.67-81
• /
• 1988

The purpose of the present study is to set up an efficient optimum design method for the large-scale reinforced concrete cylindrical shell structures like intake tower of reservoir and to establish a solid foundation for the automatic optimum structural design combined with finite element analysis. The major design variables are the dimensions and steel areas of each member of the structures. The construction cost which is composed of the concrete, steel, and form work costs, respectively, is taken as the objective function. The constraint equations for the design of intake-tower are derived on the basis of the working stress design method. The corresponding design guides including the standard specification for concrete structures have been also employed in deraving the constraint conditions. The present nonlinear optimization problem is solved by SUMT method. The reinforced concrete intake-tower is decomposed into three major substructures. The optimization is then conducted for both the whole structure and the substructures. The following conclusions can be drawn from the present study. 1. The basis of automatic optimum design of reinforced concrete cylindrical shell structures which is combined with finite element analysis was established. 2. The efficient optimization algorithms which can execute the automatic optimum desigh of reinforced concrete intake-tower based on the working stress design method were developed. 3. Since the objective function and design variables were converged to their optimum values within the first or second iteration, the optImization algorithms developed in this study seem to be efficient and stable. 4. The difference in construction cost between the optimum designs with the substructures and with the entire structure was found to be small and thus the optimum design with the substructures,rnay conveniently be used in practical design. 5. The major active constraints of each structural member were found to be the tensile stress insteel for salb, the minimum lonitudinal steel ratio constraints for tower body and the shearing stress in concrete, tensile stress in steel and maximum eccentricityconstraints for footing, respectively. 6. The computer program develope in the present study can be effectively used even by an unexperienced designer for the optimum design of reinforced concrete intake-tower.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.943-953
• /
• 2007

In this paper, we propose a Cassegrain antenna with a scalar feed horn opt rating in Ka-band. For an effective EM simulation of the Cassegrain antenna, the near-field of the feed hone is used ai the equivalent source of the Cassegrain antenna using the surface equivalent theorem. A corrugated circular horn operating with $HE_{11}$ mode is used as the feed horn. The angle and feed center of the main and sub reflectors are optimized to achieve maximum antenna efficiency. The designed feed horn shows the gain of 19dBi, the side-lobe level of less than -25dB and the half power beam width of $20^{\circ}$ at 33 GHz. The Cassegrain antenna shows the gain of 41dBi, the efficiency of 60%, the side-lobe level of less than -20dB and the half power beam width of $1.2^{\circ}$.

• KIISE Transactions on Computing Practices
• /
• v.22 no.1
• /
• pp.32-37
• /
• 2016

In model-based testing using sequence diagrams, test cases are automatically derived from the sequence diagrams. For the generation of test cases, scenarios need to be found for representing as a sequence diagram, and to extract test paths satisfying the test coverage. However, it is hard to automatically extract test paths from the sequence diagram because a sequence diagram represents loop, opt, and alt information using CombinedFragments. To resolve this problem, we propose a transformation process that transforms a sequence diagram into an activity diagram which represents scenarios as a type of control flows. In addition, we generate test cases from the activity diagram by applying a test coverage concept. Finally, we present a case study for test cases generation from a sequence diagram.