• The Korean Journal of Petroleum Geology
• /
• v.4 no.1_2 s.5
• /
• pp.27-39
• /
• 1996

In the Cretaceous, the Gulf Coast Basin evolved as a marginal sag basin. Thick clastic and carbonate sequences cover the disturbed and diapirically deformed salt layer. In the Cretaceous the salinities of the Gulf Coast Basin probably matched the Holocene Persian Gulf, as is evidenced by the widespread development of supratidal anhydrite. The major Lower Cretaceous reservoir formations are the Cotton Valley, Hosston, Travis Peak siliciclastics, and Sligo, Trinity (Pine Island, Pearsall, Glen Rose), Edwards, Georgetown/Buda carbonates. Source rocks are down-dip offshore marine shales and marls, and seals are either up-dip shales, dense limestones, or evaporites. During this period, the entire Gulf Basin was a shallow sea which to the end of Cretaceous had been rimmed to the southwest by shallow marine carbonates while fine-grained terrigengus clastics were deposited on the northern and western margins of the basin. The main Upper Cretaceous reservoir groups of the Gulf Coast, which were deposited in the period of a major sea level .rise with the resulting deep water conditions, are Woodbinefruscaloosa sands, Austin chalk and carbonates, Taylor and Navarro sandstones. Source rocks are down-dip offshore shales and seals are up-dip shales. Major trap types of the Lower and Upper Cretaceous include salt-related anticlines from low relief pillows to complex salt diapirs. Growth fault structures with rollover anticlines on downthrown fault blocks are significant Gulf Coast traps. Permeability barriers, up-dip pinch-out sand bodies, and unconformity truncations also play a key role in oil exploration from the Cretaceous Gulf Coast reservoirs. The sedimentary sequences of the major Cretaceous reseuoir rocks are a good match to the regressional phases on the global sea level cuwe, suggesting that the Cretaceous Gulf Coast sedimentary stratigraphy relatively well reflects a response to eustatic sea level change throughout its history. Thus, of the three main factors controlling sedimentation (tectonic subsidence, sediment input, and eustatic sea level change) in the Gulf Coast Basin, sea-level ranks first in the period.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.412-420
• /
• 1989

To know how the ribosomes involved in secretory protein synthesis were attached to the cytoplasmic membrane in Bacillus amyloliquefaciens, the cells were treated with puromycin combinated with magnesium at the logarithmic phase, and the variation of cell-bound and extracellular $\alpha$-amylase activity was assayed for determining the $\alpha$-amylase translocation blocking through the cytoplasmic membrane. In the abnormal $\alpha$-amylase producing mutant in which the C-terminal of the $\alpha$-amylase structure was deleted, B. umytotiquefaciens CH10-2, the $\alpha$-amylase was translocated normally through the cytoplasmic membranes, and the translocation blocking by puromycin was revealed to have a similar pattern as that in the wild type. This means that the C-terminal part of the enzyme structure may not have a signal for secretion. The cell death of the logarithmic phase cells in both strains was not affected much under 20$\mu\textrm{g}$/$m\ell$ of puromycin, however, the $\alpha$-amylase translocation was blocked markedly under less than 10$\mu\textrm{g}$/$m\ell$ of the puromycin concentration. The blocking of the enzyme secretion by puromycin may be due to the detachment of the ribosomes from cytoplasmic membranes by disturbing the nascent polypeptide synthesis. Further evidence for confirming this was that the detachment was increased in 50 mM of magnesium ion because the extracellular $\alpha$-amylase activity was decreased more under this condition. If the cells were treated with trypsin combinated with Iysozyme, the extracellular $\alpha$-amylase activity from the cultured medium was reduced markedly, however, the activity from the cells treated with trypsin only was not reduced. This means that the nascent polypeptides protruding from the cytoplasmic membrane were sensitive to the trypsin digestion, whereas the matured ones were not. Therefore, the protruding polypeptides from the cytoplasmic membranes may be truncated by trypsin before forming their final tertiary structures by folding in the cell wall layer.

• Cartoon and Animation Studies
• /
• s.27
• /
• pp.1-30
• /
• 2012

Oshii Mamoru attempts to project the perception of reality about his own modern world as it is through animation. The precedent studies on Oshii Mamoru put their focus on the point that his works have a tendency to represent the devastation of reality as the image of 'a ruin.' In addition, they gave an impression that Oshii Mamoru's animation has gradually developed to expose the 'realistic taste[beauty]' from the design perspective. However, this study is going to put its focus on the point that Mamoru's works were created as an attempt at finding the subversive possibility of the suppressed modern world under the modern capitalism in the aspect of 'everyday life' of the modern world. First, for its analytical purpose, this study intends to do that by dividing the work into the three layers such as space, body and everyday life. In Chapter II, this study, in relation with the issue of 'space' representation, analyzed the space in into the modern, mechanical, compactly capitalized space and also the space just like a closed circuit having the nature of 'repetition.' In Chapter III, this analyzed that suggests the body moving freely between a human named 'Kildren' and the inhuman from the aspect of character's body, through which Mamoru represents the capitalized, reified body of the modern world. In addition, this analyzed the extreme anxiety facing the body into the reflection of the phenomena of 'anxiety' and 'placelessness' consequent on the labor flexibility of the modern world. In Chapter IV, this study, on the basis of the analysis of layers of space & body, analyzed that the 'everyday life' of the modern world was represented in the respects of 'memory' and 'habit', and in the aspects of Mise-en-Sc$\grave{e}$ne, design and direction. In Chapter V, this rooted out the fact that Mamoru suggested the attempt at 'appropriation' based on his perception of reality about such a modern world. Such a finding includes unearthing the fact that Oshii Mamoru's work is raising a question about how to desert and appropriate the modern space. In conclusion of Chapter VI, this drew the conclusion that Oshii Mamoru's work represented the layer of 'everyday life' while dealing with the post-modern themes shown by the existing modern SF genre, provided the 'window' through which people can perceive the 'modern world radically by recommending an attempt at 'appropriation', and blazed a trail in a new realm of creation for animations.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.1
• /
• pp.41-49
• /
• 1993

The Study was conducted to develope the low temperature tolerant methane-producing bacteria(LTTB) and to increase the efficiency of anaerobic fermentation for the treatment of agricultural and livestock wastes at low temperature. The samples were collected from muddy soil, water logged sediment, organic layer and anaerobic sludge at three latitudes, $34.8{\sim}37.4\;^{\circ}N(Korea)$, $41.4\;^{\circ}N(USA)$ and $54.5{\sim}56.9\;^{\circ}N(Canada)$. They were used for determination of the methanogenesis rates for isolation and identification of the LTTB. The methanogenesis rate of smaples at low temperature were higher in the cellulose medium than methanol medium. The methanogenesis rate in the samples of subarctic region were $15{\sim}19$ moles/ml during 30 days at low temperature($8\;^{\circ}C$), whereas not detected in the samples of temperate region. The methanogenesis rate in the enrichment culture of subarctic samples were inhibited by the $40\;{\mu}g/ml$ of streptomycin + vancomycin or ampicillin + oleandomycin which were not effect to the methanogens. An inhabitation of high temperature tolerant methane producing bacteria was identified in the samples of temperate region, whereas that of the LTTB growing at $8{\sim}13^{\circ}C$ was identified in the subarctic region.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.704-710
• /
• 2012

The lower portion of sloping paddy fields normally contains excessive moisture and the higher water table caused by the inflow of ground water from the upper part of the field resulting in non-uniform water content distribution. Four drainage methods namely Open Ditch, Vinyl Barrier, Pipe Drainage and Tube Bundle for multiple land use were installed within 1-m position from the lower edge of the upper embankment of sloping alluvial paddy fields. This study was conducted to evaluate soil physical characteristics by drainage improvement in poorly drained sloping paddy field. The results showed that subsurface drainage by Pipe Drainage improves the productivity of poorly drained soils by lowering the water table and improving root zone soil layer condition. In an Pipe drainage plot, soil moisture drained faster as compared to the other drainage methods. Infiltration rate showed high tendency to Piper Drainage method about $20.87mm\;hr^{-1}$ than in Open Ditch method $0.15mm\;hr^{-1}$. And Similarly soil water and degree of hardness and shear strength phase of soil profile showed a tendency to decrease. From the above results, we found that when an subsurface drainage was established with at 1m position from the lower edge paddy levee of the upper field in sloping poorly drained paddy fields Pipe Drainage was the most effective drainage system for multiple land use.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.1-23
• /
• 2001

Chitosan is biodegradable natural polymer that has been demonstrated its ability to improve wound healing, and calcium metaphosphate(CMP) is a unique class of phosphate minerals having a polymeric structure. In this study, chitosan/CMP and platelet derived growth factor(PDGF-BB) loaded chitosan/CMP sponges were developed, and the effect of the sponges on bone regeneration and their possibility as scaffolds for bone formation by three-dimensional osteoblast culture were examined. PDGF-BB loaded chitosan/CMP sponges were prepared by freeze-drying of a mixture of chitosan solution and CMP powder, and soaking in a PDGF-BB solution. Fabricated sponge retained its 3-dimensional porous structure with $100-200\;{\mu}m$ pores. The release kinetics of PDGF-BB loaded onto the sponge were measured in vitro with $^{125}I-labeled$ PDGF-BB. In order to examine their possibility as scaffolds for bone formation, fetal rat calvarial osteoblastic cells were isolated, cultured, and seeded into the sponges. The cell-sponge constructs were cultured for 28 days. Cell proliferation, alkaline phosphatase activity were measured at 1, 7, 14 and 28 days, and histologic examination was performed. In order to examine the effect on the healing of bone defect, the sponges were implanted into rat calvarial defects. Rats were sacrificed 2 and 4 weeks after implantation and histologic and histomorphometrical examination were performed. An effective therapeutic concentration of PDGF-BB following a high initial burst release was maintained throughout the examination period. PDGF-BB loaded chitosan/CMP sponges supported the proliferation of seeded osteoblastic cells as well as their differentiation as indicated by high alkaline phosphatase activities. Histologic findings indicated that seeded osteoblastic cells well attached to sponge matrices and proliferated in a multi-layer fashion. In the experiments of implantation in rat calvarial defects, histologic and histomorphometric examination revealed that chitosan/CMP sponge promoted osseous healing as compared to controls. PDGF-BB loaded chitosan/CMP sponge further echanced bone regeneration. These results suggested that PDGF-BB loaded chitosan/CMP sponge was a feasable scaffolding material to grow osteoblast in a three-dimentional structure for transplantation into a site for bone regeneration.

• Korean Journal of Ichthyology
• /
• v.11 no.2
• /
• pp.177-183
• /
• 1999

This study was conducted to observe the spawning behavior and early life history of chinese minnow, Rhynchocypris oxycephalus reared in the laboratory. The spawning period of Rhynchocypris oxycephalus is from May to June in nature. The eggs of Rhynchocypris oxycephalus were spawned on the sand and surface of the gravel. The fertilization eggs were demersal in shape and adhesive, released as a clump forming a thin layer and their diameter were 1.70~1.90mm (mean 1.80 mm, n=20). Hatching of eggs was started in 88 hour 45 minute after fertilization at water temperature $19{\pm}0.5^{\circ}C$ and finished in 90 hour. Newly-hatched larvae were measured 4.87~5.02 mm in total length (TL, mean 4.94 mm), mouth and anus were not opened. 6 days old larvae were 6.32~6.56 mm in TL (mean 6.44 mm). Yolk sac was almost absorbed, mouth and anus was began to open. 13 days old larvae were 6.74~6.91 mm in TL (mean 6.82 mm). Part of Dorsal fin was began to rising and myomere number was 15+23=38. 25 days after hatching, total length of larvae was 8.45~8.60 mm (mean 8.52 mm). Dorsal and anal fin rays became differentiated, and also caudal part of the notocord flexion was achieved at $45^{\circ}C$. In the time, growth rate was higher than the other stage. Aggregate numbers of all fin rays were completed at 16.39~16.57 mm in TL (60 days after hatching), at which time the larvae reached the juvenile stage, but fin-fold on ventral was remained yet. External features of adult specimens were almost completed at 80 day old juveniles (18.69~18.87 mm in TL).

• Journal of Life Science
• /
• v.19 no.3
• /
• pp.366-372
• /
• 2009

In the course of screening of useful enzyme-producing microorganisms from marine sedimentary layers, we isolated 2 amylase producing strains and tested their amylase producing activities. Analyses of 16S rDNA sequences and biochemical methods (BIOLOG) of two isolates showed that they were confirmed to be a gram positive Bacillus sp. and gram negative Pseudoalteromonas sp., respectively. Excellent amylase producing strains were termed Bacillus sp. ST-63 and Pseudoalteromonas sp. ST-140, and further studies were conducted on their amylase producing characteristics. Optimum conditions for cell growth in amylase activity were obtained when the isolate (Bacillus sp. ST-63 and Pseudoalteromonas sp. ST-140) was cultured at $30^{\circ}C$ and pH $7{\sim}8$.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.741-755
• /
• 1995

Currently titanium is the material of choice for implants because of its biological acceptance. This high degree of biocompatibility is thought to result, in part, from the protective and stable oxide layer that presumably aids in the bonding of the extracellular matrix at the implant-tissue interface. Endosseous dental implants are interfaced with bone, connective tissue, and epithelium when implanted into the jaw bone. The soft tissue interface including connective tissue and epithelium is one of the most critical factors in the determination of implant maintenance and prognosis. For maintenance of failing or failed implants, it is essential to treat the implant fixture surface to remove bacterial endotoxins and make a surface tolerated by surrounding soft and hard tissues. In this study, the effect of mechanical treatment on titanium plasma sprayed implant on adhesiveness and proliferation of human gingival fibroblasts and changed surface characteristics were studied. titanium plasma sprayed discs manufactured by Friedrichsfeld company were treated with loaw speed stone bur, a rubber point and a jetpolisher. Its surface components were analyzed with Energy dispersive X-ray spectroscopy to evaluate whether the surface characteristics were altered or not. To observe the spreading pattern of the human gingival fibroblasts which attached to the all specimens author used the scanning electron microscope. The results were as follows : Pure titanium and plasma sprayed titanium, stone polished titanium showed titanium peak and small amout of aluminum, so there was no alteration on surface characteristics. Under the scanning electron microscopic examination in the initial attachment of human gingival fibroblast, there was a slight enhancement in pure titanium, stone polished titanium than plasma sprayed titanium. After 6 hours, the pure titanium and stone polished titanium showed human gingival fibroblasts were elongated and connected with numerous processes. Human gingival fibroblasts were more intimately attached on the pure titanium discs than on the other discs. The human gingival fibroblasts attached on the plasma sprayed titanium by thin and elongated processes. After 24 hours, the human gingival fibroblasts connected with each other via numerous processes and compeletly covered the pure titanium and stone polshed titanium discs. Human gingival fibroblasts had multiple point contacts with more long and thin lamellopodia and showed a little bare surface on plasma sprayed titanium discs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.54-60
• /
• 2003

This study evaluated the influence of chemomechanical caries removal agent $Carisolv^{TM}$(MediTeam, Sweden) for composite resin adhesion to sound human permanent and primary dentin. The buccal/labial surfaces of 80 permanent molars and 80 primary incisors were used. Four types of adhesives and one composite resin were used; AQ Bond(Sun Medical, Japan), Clearfil SE Bond(Kuraray, Japan), Single Bond(3M, USA), Scotchbond Multi-Purpose(3M, USA) and Z100(3M, USA). One drop of $Carisolv^{TM}$(MediTeam, Sweden) was pretreated on the dentin for 0 second(control) and 60 seconds. The specimens were thermocycled for 1,000 times in baths kept 5 degrees C and 55 degrees C with a 30 seconds dwell time. Shear bond strengths were tested and the data was statistically analyzed using one-way ANOVA with subsequent post hoc Scheffe test at p<0.05. $Carisolv^{TM}$ treatment significantly decreased the shear bond strength. Shear bond strength of permanent dentin was significantly higher than that of primary dentin. Clearfil SE Bond treatment groups showed the highest shear bond strength and AQ Bond treatment groups showed the lowest shear bond strength.