• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.778-780
• /
• 1999

Arithmetic unit speed depends strongly on the algorithms employed to realize the basic arithmetic operations.(add, subtract multiply, and divide) and on the logic design. Recent advances in VLSI have increased the feasibility of hardware implementation of floating point arithmetic units and microprocessors require a powerful floating-point processing unit as a standard option. This paper describes the design of floating-point multiplier for IEEE 754-1985 Single-Precision operation. Booth encoding algorithm method to reduce partial products and a Wallace tree of 4-2 CSA is adopted in fraction multiplication part to generate the $32{\times}32$ single-precision product. New scheme of rounding and sticky-bit generation is adopted to reduce area and timing. Also there is a true sign generator in this design. This multiplier have been implemented in a ALTERA FLEX EPF10K70RC240-4.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권1호
• /
• pp.14-18
• /
• 2000

This paper describes a series of experiments to investigate the operational characteristics of a superconducting power supply with superconducting excitation coil. In this experiment, the superconducting excitation coil is introduced to control the pole-flex in the air gap of the machine. The operating current of the superconducting powder supply is designed to have the value of 300 [A] for the rotational speed of 600 rpm. Sensors installed on the Nb sheet yield the information on the spatial and temporal behaviors of the magnetic field in spot and on the characteristics of the superconducting power supply.

• 가족자원경영과 정책
• /
• 제15권2호
• /
• pp.63-84
• /
• 2011

This qualitative case study focused on the workers' flexibility needs. We selected eight full-time workers from one 2009 family friendly certified firm for observation and in-depth interview. The workers are categorized into three groups; male employees with housewives, double income family workers depending on extended family, and double income family workers depending on paid babysitter. The spouse's work status and informal extended familial support to child care were crucial factors to influence their work family life styles and flexibility needs. The flex time is the most desirable everyday needs for the dual working child caring parents depending on the paid help. And the female workers' concerned about the stigma effect of the institutionalized flexibility use of the inferior labors.

• Elastomers and Composites
• /
• 제29권2호
• /
• pp.121-130
• /
• 1994

The physical properties of rubber blend between natural rubber(NR) and ethylene propylene diene terpolymer(EPDM) were investigated as a study of EPDM composite materials. For EPDM/NR blends, the effects of ethylene and diene contents in EPDM, blend ratio, dicumyl peroxide(DCP) curing system on the physical properties, interfacial adhesion force and dynamic crack growth etc. were studied. EPDM/NR blends loaded with carbon black were prepared by mechanical mixing and cured by plate heating cure press. Crosslinking density was measured by swelling method with toluene. The physical properties of all blends were measured with Instron, fatigue to failure(FTF), Demattia flex cracking tester(DMFC), scanning electron microscopy (SEM), etc. As the ethylene and diene contents in EPDM increased, the physical properties, such as dynamic crack growth, adhesion to other component were increased too. Interfacial adhesion force of EPDM/NR blends to dissimilar layer was improved by the use of optimum peroxide curing system.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.193-198
• /
• 1984

This study was conducted to compare the chip removal capability of root canal enlarging instruments. Fifty five buccal or mesial canals from upper and lower molar teeth were randomly selected and divided into three groups; Reamer, K-type file and K-flex file. Fifteen canals in each group were individually enlarged with one of three tested instruments and irrigated with 5cc of normal saline solution. After instrumentation, each canal was dried with paper point and the canal was splited longitudinally and the cleanness of root canal surface was evaluated under stereoscope by three observers. The results were as follows; 1. Most of the canals experimented showed varying degree of the presence of debris. 2. The canals prepared with reamers showed the most clean canal surface. 3. There was no significant difference in debridement effect between k-type file and k-flexfile.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.364-364
• /
• 2008

유한요소해석을 통하여 수도계량기용 삽입형 초음파 유량계 압전 트랜스듀서의 설계를 실시하고 이를 평가하였다. 상용 해석프로그램인 PzFlex를 사용하여 센서의 transient 해석을 실시하였다. 이를 통해 각 구성부품의 재질 및 형상 변수를 결정하였다. 이를 기준으로 트랜스듀서를 제작하였으며, 두께모드 중심주파수가 1.2MHz가 되도록 직경 10mm의 압전소자를 이용하였다. 시뮬레이션을 통해 $25^{\circ}$의 방사각으로 음향파가 발생되도록 트랜스듀서를 설계, 제작한 후, 트랜스듀서의 전기적, 기계적 특성을 평가하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.130-133
• /
• 2019

수중(submerged)에 부유(floating)식으로 계류되는 거주목적의 구조체 설계(design basis) 관련 연구로서 계류안정성 모델(수중가옥)을 만들고 거동을 정수압적 유체역학적으로 수치분석한다. 임의 가정한 수중가옥의 1)배수량 규모 2) 함체형상에 따른 환경압 하에서의 계류안정성을 a)부력중심, b)무게중심과 가변하중의 변위에 따른 c)함체 기울기를 MATLAB프로그램을 이용하여 산정한다. 나아가 수중가옥의 동적(hydrodynamic) 계류안정성을 임의 시공 장소인 독도의 기상청 울릉도-독도 부이 최근 관측치를 근거로 OrcaFlex프로그램을 이용하여 분석하므로써 수중가옥의 수중건축 시공간상 계류안정성 설계요건(design basis)을 구체화 한다.

• 한국발생생물학회지:발생과생식
• /
• 제18권4호
• /
• pp.311-319
• /
• 2014

Newly hatched black porgy larvae (Acanthopagrus schlegeli) swam to the surface, with the mouth and anus still closed and were 1.90-2.11 mm (mean, 2.0 mm) in total length (TL). The larvae were 2.71-2.94 mm TL (mean, 2.82 mm) on day 2 after hatching. At this time, about two-thirds of the yolk was absorbed, the bladder and intestines had formed, and the mouth and anus were open. Total length was 4.32-4.66 mm (mean, 4.45 mm) at the post-larval stage on days 5-6 after hatching, and the yolk and oil globule were almost absorbed. The end of the notochord began to flex, and 6-8 caudal fin rays were visible. The larvae were 15.37-16.1 mm TL (mean, 15.83 mm) at the juvenile stage on days 30-32 after hatching, and the number of rays in all fins was completely revealed.

• 한국소음진동공학회논문집
• /
• 제23권9호
• /
• pp.806-813
• /
• 2013

For the past years, higher power rating 2 stroke super long stroke diesel engines having more than 8 cylinders and larger cylinder bore are installed mainly on very large containerships to save on fuel consumption. However, these engines are prone to X-mode vibration due to 2nd node torsional vibration or the X-type moment, particularly because of the increase in total length and height. Recently, cases of excessive X-mode vibration often occurred on engine's major components. This vibration is manifested also as secondary vibration causing failure in engine-mount large structures. This study investigated the excitations caused by the 2nd node propulsion shafting torsional vibration that influence X-mode vibration of the main engine and practical countermeasures are proposed. An 8RT-flex82T 8 cylinder engine and 11S90ME-C 11 cylinder engine for a container ship was used as research model.

• 디지털산업정보학회논문지
• /
• 제8권1호
• /
• pp.17-27
• /
• 2012

Most of the current cultivation log is recorded by growers manually or whose environment information is input based on the grower's own judgement. It is not easy for growers to record the image of disease and insect pests in the cultivation log. In this regards, u-Farm cultivation log management system based on Web 2.0 and smart phone is introduced in this paper, that is used for the effective cultivation management and grower's convenience. In the system, the value of environment information is transmitted to servers via sensors. It designs and implements Web 2.0 Flex so as to make the cultivation log more reliable and provide users with active, convenient GUI in case the log is recorded by desktop. In this process, detailed modules are designed by object-oriented UML considering the reusability and maintenance of the system. Moreover, the system introduced in this paper is proved to be more excellent by the qualitative assessment compared with the other researches.