• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.130-134
• /
• 2018

Wireless capsule endoscopy (WCE) is considered as recent technology for the detection cancer cells in the human digestive system. WCE sends the captured information from inside the body to a sensor on the skin surface through a wireless medium. In WCE, the design of low-power consumption devices is a challenging topic. In the Shannon-Nyquist sampling theorem, the number of samples should be at least twice the highest transmission frequency to reconstruct precise signals. The number of samples is proportional to the power consumption in wireless communication. This paper proposes compressive sensing as a method to reduce power consumption in WCE, by means of a trade-off between samples and reconstruction accuracy. The proposed scheme is validated under channel constraints, expressed as the realistic human body path loss. The results show that the proposed scheme achieves a significant reduction in WCE power consumption and achieves a faster computation time with low signal error reconstruction.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.33-33
• /
• 2009

Silicon nano-structures have great potential in bionic sensor applications. Atomic force microscopy (AFM) anodic oxidation have many advantages for the nanostructure fabrication, such as simple process in atmosphere at room temperature, compatibility with conventional Si process. In this work, we fabricated simple FET structures with channel width W~ 10nm (nanowire) and $1{\mu}m$ (nano-ribbon) on ~10, 20 and 100nm-thinned silicon-on-insulator (SOI) wafers in order to investigate the surface effect on the transport characteristics of nano-channel. For further quantitative analysis, we carried out the 2D numerical simulations to investigate the effect of channel surface states on the carrier distribution behavior inside the channel. The simulated 2D cross-sectional structures of fabricated devices had channel heights of H ~ 10, 20, and 100nm, widths of L ~ $1{\mu}m$ and 10nm respectively, where we simultaneously varied the channel surface charge density from $1{\times}10^{-9}$ to $1{\times}10^{-7}C/cm2$. It has been shown that the side-wall charge of nanowire channel mainly affect the I-V characteristics and this was confirmed by the 2D numerical simulations.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.132-138
• /
• 2008

Recently, many frequency sharing technology including CR (Cognitive Radio) technology have been studied actively because of frequency scarcity. For implementing CR systems, spectrum sensing technology plays key role. In IEEE 802.22 WRAN, the first standard aimed at Internet service in a TV channel with CR technology. This paper explained the various spectrum sensing schemes detecting narrowband ATSC signal in the IEEE 802.22 such as Energy detector, Spectral Correlation Sensing scheme, Covariance based Sensing algorithm and analyzed in terms of the probability of misdetection when the probability of false alarm is 10%. Based on simulation results, this paper proposed a duplex sensing scheme based on Energy detector and analyzed the capability of the proposed sensing scheme comparing with each sensing scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.6
• /
• pp.759-767
• /
• 2020

This paper proposes a new Recurrent neural network (RNN) based spectrum sensing technique for cognitive radio communications. The proposed technique determines the existence of primary user's signal without any prior information of the primary users. The method performs high-speed sampling by considering the whole sensing bandwidth and then converts the signal into frequency spectrum via fast Fourier transform (FFT). This spectrum signal is cut in sensing channel bandwidth and entered into the RNN to determine the channel vacancy. The performance of the proposed technique is verified through computer simulations. According to the results, the proposed one is superior to more than 2 [dB] than the existing threshold-based technique and has similar performance to that of the existing Convolutional neural network (CNN) based method. In addition, experiments are carried out in indoor environments and the results show that the proposed technique performs more than 4 [dB] better than both the conventional threshold-based and the CNN based methods.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.526-529
• /
• 2005

Dual-channel Radiometers for Earth and Atmosphere Monitoring (DREAM) is the Korean first spaceborne microwave radiometer which is the main payload of Science and Technology SATellite-2 (STSAT-2). STSAT-2 will be launched by Korea Space Launch Vehicle-l (KSL V-I) at NARO Space Center in Korea in 2007. DREAM is a two-channel, total power microwave radiometer with the center frequencies of 23.8 GHz and 37 GHz. The spaceborne radiometer is composed of an antenna unit, a receiver unit, and a data acquisition/processing unit. The bandwidths of radiometer are 600 MHz at 23.8 GHz and 1000 MHz at 37 GHz. The integration time of two channels is 200 rns. The sensitivity of DREAM is less than 0.5 K. This paper presents the required performance and system design of DREAM in detail.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.475-478
• /
• 2004

The DCSU performs satellite payload data acquisition and storage functions before sending the data to the ground station. While imaging, the DCSU makes a file per each input channel and store into memory stack. For the successful imaging mission, proper DCSU mission parameters should be uploaded before the mission such as file name, file size, output channel for the download transmission and so on. This paper will describe the DCSU recording mechanism and some notices that might be helpful for the ground operators.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.5
• /
• pp.235-241
• /
• 2013

A low power CMOS control circuit is applied in an integrated DC-DC buck converter. The integrated converter is composed of a feedback control circuit and power block with 0.35 ${\mu}m$ CMOS process. A current-sensing circuit is integrated with the sense-FET method in the control circuit. In the current-sensing circuit, a current-mirror is used for a voltage follower in order to reduce power consumption with a smaller chip-size. The N-channel MOS acts as a switching device in the current-sensing circuit where the sensing FET is in parallel with the power MOSFET. The amplifier and comparator are designed to obtain a high gain and a fast transient time. The converter offers well-controlled output and accurately sensed inductor current. Simulation work shows that the current-sensing circuit is operated with an accuracy of higher than 90% and the transient time of the error amplifier is controlled within $75{\mu}sec$. The sensing current is in the range of a few hundred ${\mu}A$ at a frequency of 0.6~2 MHz and an input voltage of 3~5 V. The output voltage is obtained as expected with the ripple ratio within 1%.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.800-803
• /
• 2006

The Space-borne electro-optical camera system, like KOMPSAT has panchromatic redundant image channel as well as primary channel in order to increase reliability of satellite system. In most case redundant channel never been used during the whole mission period. Staggered array configuration using redundant image channel and new operation mode proposed which operates primary and redundant channel simultaneously. Without new hardware design, fast electronics and system complexity, we can get 1.414 times more fine GSD image of original system and aliasing effect which corrupt high frequency information of image can be minimized. To get the more efficiency from staggered array configuration, we introduce masked pixel CCD.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.253-263
• /
• 2015

Lately, spectrum sensing performance has been improved by using cooperate spectrum sensing which each results of sensing of several secondary users are reported to the fusion center. Using Cognitive Radio, secondary user is able to share a bandwidth allocated to primary user. In this paper, we propose a new decentralized cooperative spectrum sensing scheme which compensates the performance degradation of existing decentralized cooperative spectrum sensing considering the error probability of the channel which sensed result of the secondary user is delivered to the fusion center in decentralized cooperative spectrum sensing. In addition, a sensing threshold optimization of minimizing the error probability of decentralized cooperative spectrum sensing is introduced by deriving the equation and the optimal sensing threshold has been confirmed to maximize the decentralized cooperative spectrum sensing performance.

• Journal of Communications and Networks
• /
• v.16 no.2
• /
• pp.238-244
• /
• 2014

A key technical challenge in TV white spaces is the efficient spectrum usage without interfering with primary users. This paper considers available spectrum discovery scheme using in-band sensing signal to support super Wi-Fi services effectively. The proposed scheme in this paper adopts non-contiguous orthogonal frequency-division multiplexing (NC-OFDM) to utilize the fragmented channel in TV white space due to microphones while this channel cannot be used in IEEE 802.11af. The proposed solution is a novel available spectrum discovery scheme by exploiting the advantages of a sensing signaling. The proposed method achieves considerable improvement in throughput and delay time. The proposed method can use more subcarriers for transmission by applying NC-OFDM in contrast with the conventional IEEE 802.11af standard. Moreover, the increased number of wireless microphones (WMs) hardly affects the throughput of the proposed method because our proposal only excludes some subcarriers used by WMs. Additionally, the proposed method can cut discovery time down to under 10 ms because it can find available channels in real time by exchanging sensing signal without interference to the WM.