• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권3호
• /
• pp.226-237
• /
• 2005

Purpose : Extensive defect of oral and maxillofacial area is usually reconstructed with composite flap including skin paddle. However, if the defects are lined with only skin components, the mucosa's role in mastication and texture are not restored. Furthermore, stiffness and hair-growing prevent denture rehabilitation and good oral hygiene. This study was performed to overcome the disadvantages of composite soft tissue flaps including the skin and to make a model for myo-mucosal flaps. Materials and methods : Buccal mucosa sized $0.5\times1.0\;cm^2$ from New Zealand rabbit (around 1.5kg) was harvested and cultivated by the modification of Rheinwald and Green's keratinocyte culture method. Cultured mucosa was grafted on the fascia of latismus dorsi as form of mucosal sheet. After 7, 10, 14 days, the myomucosal flap was excised and evaluated under light microscope with H & E and immunohistochemical staining. As control group, harvested buccal mucosa from rabbit was transplanted to gracilis muscle(n=6). Results : From 7 days after prelamination, the basal layer of the grafted mucosa resembled that of normal mucosa. As control group, transplanted mucosa had original shape but there's slight inflammatory reaction. Prelaminated mucosa has 19.8$\pm$4.59 cell layers and some samples have more than 20 layers. The expression rate of PCNA was relatively strong (42.9%$\pm$14.1) at the basal layer of grafted mucosa and the laminin was found at the basal layer. On the contrary, prelaminated mucosa at 10 days showed moderate expression rate of PCNA(32.4%$\pm$4.62). We found the mucosal layer was somehow disappeared and there is strong inflammatory reaction. After 14 days prelamination, the grafted oral keratinocytes were almost disappeared and expression of PCNA was not observed. Conclusion : We can make 75 fold large mucosal($3850mm^2$) sheet from small samples of mucosa $(50mm^2)$. Epithelial sheet that grafted on the fascia of muscle underwent differentiation and proliferation. But after 10, 14 days, there was strong inflammatory reaction and the grafted mucosa was destroyed from surface layer. In rabbit model, transfer of fascio-mucosal flap should be done from 7 to 10 days after prelamination.

• Clinical and Experimental Reproductive Medicine
• /
• 제21권1호
• /
• pp.31-41
• /
• 1994

Morphological estimation of human spermatozoa is complicated by the fact that there is great natural variation in shape. This natural variation in shapes makes it difficult to say which forms are associated with infertility and which are normal variations. Possibly post coital test or in vitro cervical mucus penetration tests will help to clarify this question by showing which sperm are capable of penetration. The purpose of this investigation was performed to assess distribution of various morphological abnormalities according to the ability of sperm to penetrate cervical mucus. The sperm-mucus penetration using hen's egg white as substituting mucus for human cervical mucus was done in 45 fertile men with normal semen analysis and 122 infertile men with abnormal seminal parameters more than one. The female partners of 122 infertile couples showed normal results in the female fundamental test for fertility. Conventional semen analysis was evaluated according to the WHO standard normal(l980). The detailed classification of the abnormal sperm was made according to David et al(l975). The vitality of the sperm samples determined by eosin yellow-nigrosin stainig according to the method of Eliasson(l977). Results were as follw; 1. The patients had significantly lower total sperm count, motility (%), normal morphology (%), viability and total functional sperm fractions(TFSF) than fertile donors. 2. The mean value of sperm penetration distance of the patients(28.69${\pm}$11.02mm) showed significantly lower than fertile donors(37.33${\pm}$5.49mm). And 43/45 fertile donors(95.5%) as well as 57/122 patients(46.7%) had over 30mm in sperm penetration distance respectively. While 2/45 fertile donors(4.5 %) and 65/122 patient(53.3%) had under 30mm in sperm penetration distance respectively. 3. The morphological abnormalities in fertile donors were significantly lower 23.04${\pm}$5.83% (head = 12.89${\pm}$4.98, neck=6.11${\pm}$3.83%, and tail=3.43${\pm}$2.65%), compared to 36.03${\pm}$14. 40% in patients(head = 15.98 8.60%, neck 11.20${\pm}$6.56% and tail=8.70${\pm}$6.55%). Also, 3 types of sperm abnormalities including head, neck and tail were significantly lower in patient than fertile donors, respectively. Both the patients and fertile donors showed higher distribution of sperm with abnormal head than abnormal neck and tail. 4. The mean morphological abnormalities(SP>30mm) of the patients(30.68 11.64%; head = 15.95${\pm}$9.35%, neck=8.14${\pm}$4.21 %, tail=6.56${\pm}$5.64%) were significantly lower compared to patients(40.72${\pm}$15.01 %; head=16.02${\pm}$7.69%, neck 13.89${\pm}$7.82%, tail=1O.58${\pm}$6.75%) under 30mm in sperm penetration distance. Also, both groups over 30mm and under 30mm in sperm penetration showed distance higher distribution of sperm with abnormal head than abnormal neck and tail. The morphological abnormalities of head did not show significant difference but abnormal neck and tail were significant difference between the over 30mm and under 30mm group in sperm penetration distance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.298-298
• /
• 2014

Quantum dot infrared photodetectors (QDIPs) based on Stranski-Krastanov (SK) quantum dots (QDs) have been widely explored for improved device performance using various designs of heterostructures. However, one of the biggest limitations of this approach is the "pancake" shape of the dot, with a base of 20-30 nm and a height of 4-6 nm. This limits the 3D confinement in the quantum dot and reduces the ratio of normal incidence absorption to the off-axis absorption. One of the alternative growth modes to the formation of SK QDs is a sub-monolayer (SML) deposition technique, which can achieve a much higher density, smaller size, better uniformity, and has no wetting layer as compared to the SK growth mode. Due to the advantages of SML-QDs, the SML-QDIP design has attractive features such as increased normal incidence absorption, strong in-plane quantum confinement, and narrow spectral wavelength detection as compared with SK-DWELL. In this study, we report on the improved device performance of InAs/InGaAs SML-QDIP with different composition of $Al_xGa1-_xAs$ barrier. Two SML-QDIPs (x=0.07 for sample A and x=0.20 for sample B) are grown with the 4 stacks 0.3 ML InAs. It is investigated that sample A with a confinement-enhanced (CE) $Al_{0.22}Ga_{0.78}As$ barrier had a single peak at $7.8{\mu}m$ at 77 K. However, sample B with an $Al_{0.20}Ga_{0.80}As$ barrier had three peaks at (${\sim}3.5{\mu}m$, ${\sim}5{\mu}m$, ${\sim}7{\mu}m$) due to various quantum confined transitions. The measured peak responsivities (see Fig) are ~0.45 A/W (sample A, at $7.8{\mu}m$, $V_b=-0.4V$ bias) and ~1.3 A/W (sample B, at $7{\mu}m$, $V_b=-1.5V$ bias). At 77 K, sample A and B had a detectivity of $1.2{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-0.4V$ bias) and $5.4{\times}10^{11}cm.Hz^{1/2}/W$ ($V_b=-1.5V$ bias), respectively. It is obvious that the higher $D^*$ of sample B (than sample A) is mainly due to the low dark current and high responsivity.

• 헤리티지:역사와 과학
• /
• 제54권2호
• /
• pp.78-97
• /
• 2021

1795년 윤2월 12일 서장대에서 행해진 군사훈련을 그린 <서장대야조도(西將臺夜操圖)>를 중심으로 관직자의 유형별 복식과 유형별 복식의 구성에 따른 특징을 고찰하였으며 고증 결과는 다음과 같다. 첫째, 서장대 안팎에서 왕 가까이에 위치한 관직자는 모두 34명인데 당상관 27명, 당하관 7명이었다. 34명 관직자의 복식 유형은 모두 3종으로 갑주·융복·군복으로 분류되었는데 그 중 갑주 착용자 12명은 모두 당상관이었고, 융복 착용자 5명은 당상관이었으며, 군복 착용자는 당상관 11명과 당하관 6명이었다. 둘째, 갑주의 형태 고증은 말 타기에 적합한 여반 장군의 갑옷 유물과 『무예도보통지』의 갑주 그림을 참조하고, 착용의 실용성을 고려하여 갑옷의 구성품을 정하였다. 갑주의 구성품은 투구, 갑의, 갑상, 호항, 호액, 비갑에 골미를 추가하였다. 갑주 색상은 <서장대야조도> 갑주에서 가장 표현 빈도가 높은 홍색과 녹색으로 고증하였다. 셋째, 당상 융복의 구성은 호수를 장식한 주립, 남색 철릭, 홍색 광다회, 정, 수화자로 고증하였다. 넷째, 군복 구성은 안을 올린 전립, 동다리, 전복, 요대, 전대, 수화자로 고증하였다. 군복에서 당상과 당하의 직물차이는 문양의 유무에 있었는데 당상관은 운보문 직물을, 당하관은 문양이 없는 직물을 사용하였다. 그리고 당상관은 장식품의 세부 재료에서 옥과 금, 은을 사용하였다. 그 외에 무기는 시복, 환도, 등편, 비구와 깍지 등을 갖추었다. 정조대 기록에는 다양한 색의 협수가 보이므로 당상관과 당하관의 동다리와 전복 색상은 다양한 배색으로 고증하였다. 이상의 고증 결과를 반영하여 콘텐츠 제작을 위한 복식의 시각화 자료로 제시하였다. <서장대야조도> 관직자 복식의 고증 결과를 반영한 시각화의 기본 원칙에서 3D 콘텐츠 제작이나 실물 제작이 가능한 기준을 제시하였다. 시대와 신분에 따른 형태·색상·재질의 견본, 각 복식과 지물을 패용한 앞·옆·뒤 모습을 제시하고 색상은 RGB와 CMYK로 제시하였다.

• 한국응용곤충학회지
• /
• 제36권1호
• /
• pp.67-72
• /
• 1997

우리나라에서 뽕나무 및 과수의 주요 천공성해충으로 알려진 뽕나무하늘소의 지역별 분포, 알 과 부화유충의 크기 및 월동중 생존률, 그리고 월동태 등 생태적인 특성을 조사하였다. 7개도의 뽕밭에서 뽕나무하늘소의 분포를 조사한 결과 경기지역이 3.05%로 가장 높았고 경남지역은 0.28%로 가장 낮았다. 가지당 산란흔 수는 1가지에 1개가 87.7%로 가장 많았고, 산란흔의 크기는 평균 $2.38\times1.45\times0.34$ cm 였으며, 산란흔을 가지고 있는 가지의 지경은 평균 1.7cm 였다. 알의 크기는 단경 $2.32\pm0.33$ mm, 장경 $6.60\pm0.55$ mm로 긴 타원형이었으며, 무게는 $16.6\pm2.94$ mg 이었다. 부화유충은 체중이 $16.6\pm2.4$ mg, 체장은 $6.36\pm0.66$ mm로 유백색이었다. 유충의 가지내 이동방향은 아래쪽으로 이동하는 것이 야외사육의 경우 94.2%, 실내가지육에서는 87.9%로 대부분 아래쪽으로 이동하였다. 수집한 가지의 산란흔을 가지고 월동태를 조사한 결과 경기.경북지역에서 알의 비율이 유충비율보다 2~3배 많았으며 전북, 전남, 경남지역에서는 유충비율이 높았다. 월동후 유충의 생존율은 91.2%로 매우 높은 반면 알의 생존율은 6.6%로 상당히 낮게 나타났다. 이상의 결과로 볼 때, 비록 낮은 비율이지만 뽕나무하늘소의 경우 알로도 월동함을 알 수 있었다.

• 한국측량학회지
• /
• 제25권6_2호
• /
• pp.645-651
• /
• 2007

일반적으로 수치지도의 등고선은 항공사진을 해석 및 수치 도화기 상에서 입체시 하여 동일한 높이의 점들을 3차원으로 측정하고 도화하여 생성되므로 등고선 도화는 작업량이 많고 도화사의 주관적인 판단과 경험에 의해 결정된다. 그러므로 지형의 형태와 특성을 묘사하는 등고선의 도화는 도화사의 풍부한 경험이 요구된다. 또한 국내의 수치지도는 수치지형모델(DTM) 데이터를 포함하고 있지 않으므로 DTM이 필요한 경우 대부분 등고선 데이터로부터 간접적으로 생성한다. 본 연구에서는 지형의 특성에 대한 중요한 정보를 포함하고 있는 model key point를 등고선에서 추출하고, 이를 기반으로 지형적 특성을 고려하여 DTM의 격자간격을 효율적이고 융통적으로 조절하여 정량적 및 정성적인 측면에서 최적의 데이터를 이용하여 DTM을 생성하는 방법을 제안한다. 이를 위하여 progressive sampling 기법을 적용하여 지형이 복잡하여 기복이 큰 산악지역에는 격자간격을 작게하고 지형이 완만한 지역은 격자간격을 상대적으로 크게한다. 그러므로 고정된 하나의 격자간격을 사용하지 않고 지역별로 서로 다른 격자간격을 가지는 다중격자 DTM을 생성하였다. 다중격자 DTM은 용량이 최적화되어 계산량이 적고, 신속한 디스플레이 할 수 있는 장점이 있다.

• 비파괴검사학회지
• /
• 제24권2호
• /
• pp.164-170
• /
• 2004

중수로 내부구조물 중 칼란드리아관(CT)와 액체주입노즐관(LIN)은 서로 수평으로 90도 교차되게 배열되어 있으며 원자로 내의 열, 방사선, 하중에 의해 creep 현상이 발생되어 처짐이 일어난다. 칼란드리아관은 액체주입노즐관과 동일 재료이나 운전 온도와 방사선 조사량으로 인해 액체주입노즐관에 비해 상당히 열악한 조건에 노출되어 있으므로 처짐이 심각할 것으로 예상된다. 만약 두 관의 접촉이 발생되면 원전 안전성에 영향을 미칠 것이므로 인접관에 대한 접촉여부 점검은 중수로 안전현안 중 하나이다. 이러한 접촉여부를 확인하기 위하여 핵연료채널 내부로 탐촉자를 삽입하여 인접관과의 교차점에서 간격을 직접측정하기 위한 방법으로 원거리장 와전류검사 (RFECT) 기술을 적용하였다. 핵연료채널 인접관인 액체주입노즐관 신호 취득시 발생 가능한 잡음 신호(두께변화, Lift-off, 수축)에 대해 체적적분법에 의한 모델링으로 조사하였고, 신호와 잡음과의 분리 가능한 조건을 확인하였다. 원거리장 와전류검사 적정 조건은 민감도와 투과력 그리고 잡음신호 등을 동시에 고려하여 주파수 1kHz와 코일간격 200m로서 결정하였다. 원거리장 와전류검사 실험 결과 칼란드리아관과 액체주입노즐관 사이의 간격 변화에 대한 신호 특성을 전압평면을 이용하여 상관관계를 도출하였다.

• 한국잠사곤충학회지
• /
• 제17권1호
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.61-70
• /
• 1986

In accordance with a rapid growth of demani on aquatic animals, researches of the unused fishery resources On the deep sea b~d in the Korean Waters has been and will be required. The authors carried out a series of fishing experiments to investigate the available resources and to find the effective fishing method on the deep sea bed of the Korean East Sea. In the experiments, 19 kinds of traps which are different from each other in shape, mesh size and entrance diameter were used. The fishing experiments w~r;; carried out in four areas of 20Dm, 600.'11, 800m and 1000.'11 deep respectively, by the Pusan 402 (30:) GT) and the Pusan 403 (279GT), the training ships of National Fisheries University of Pusan, during August, 1986. The catc~ were analyzed with the size, the depth and the construction of traps. The results obtained can be summarized as follows: 1. Main species of the catch w~re pink shrimp, Pandalus bolelis, a kind of welks, Buccimum striatissimum and a kind of larg~ crabs. Chiono8cetes japonicus and the another species were few. 2. The CPUE value (expressed by the number of catch per trap in this paper) of pink shrimp was the highest in the depth of 20J-n around, and the value in the depth of 600.'11 or more decreased gradually with an increase of the depth. But, the value of Buccimum straitissimum was much higher in the depth of 6:J:)!1I or more than that in the depth of 200m around. On the other hand, the value of Chion:Jecetes japonjcus was very low in general. 3. The iniividual body size of the catch differed with the depth. Pink shrimps caught in the depth of 200m around were smaller than those in the depth of 600.'11 or more. In contrast with this, Baccimum striatissim:t.m caught in the depth of 200m around were larger than those in the depth of 600.'11 or more. 4. Depending on the selection curve in Ishida's method for the mesh size of trap webbing, the carapace length of pink shrimp and the shell length of Buccimum striatissimum which are equivalent to 100% relative catching efficiency can be estimated about 3.5cm and 6.5cm or so respectively. 5. The number of catch of pink shrimp and Buccimum striatissimum by the 60.'1'1.'11 entrance diameter of trap were less than that by the 90mm, 120mm and 150mm, even thogh the diffierence am~r, g 9:Jmm, 120.'11.'11 and 150:1'.'11 are not so large.

• Ocean Systems Engineering
• /
• 제1권4호
• /
• pp.285-296
• /
• 2011

Spar platforms have several advantages for deploying wind turbines in offshore for depth beyond 120 m. The merit of spar platform is large range of topside payloads, favourable motions compared to other floating structures and minimum hull/deck interface. The main objective of this paper is to present the response analysis of the slack moored spar platform supporting 5MW wind turbine with bottom keel plates in regular and random waves, studied experimentally and numerically. A 1:100 scale model of the spar with sparD, sparCD and sparSD configuration was studied in the wave basin ($30{\times}30{\times}3m$) in Ocean engineering department in IIT Madras. In present study the effect of wind loading, blade dynamics and control, and tower elasticity are not considered. This paper presents the details of the studies carried out on a 16 m diameter and 100 m long spar buoy supporting a 90 m tall 5 MW wind turbine with 3600 kN weight of Nacelle and Rotor and 3500 kN weight of tower. The weight of the ballast and the draft of the spar are adjusted in such a way to keep the centre of gravity below the centre of buoyancy. The mooring lines are divided into four groups, each of which has four lines. The studies were carried out in regular and random waves. The operational significant wave height of 2.5 m and 10 s wave period and survival significant wave height of 6 m and 18 s wave period in 300 m water depth are considered. The wind speed corresponding to the operational wave height is about 22 knots and this wind speed is considered to be operating wind speed for turbines. The heave and surge accelerations at the top of spar platform were measured and are used for calculating the response. The geometric modeling of spar was carried out using Multisurf and this was directly exported to WAMIT for subsequent hydrodynamic and mooring system analysis. The numerical results were compared with experimental results and the comparison was found to be good. Parametric study was carried out to find out the effect of shape, size and spacing of keel plate and from the results obtained from present work ,it is recommended to use circular keel plate instead of square plate.