• 한국한의학연구원논문집
• /
• 제12권1호
• /
• pp.23-38
• /
• 2006

The taxonomic list of specific features in external and internal shape and the pattern analysis of Aconitum carmichalei $D_{EBX}$ as the original plant of Aconiti Lateralis Radix Preparata and Aconitum cliiare Dc as the original plant of Aconiti Ciliare Tuber are as follows. 1. Aconitum carmichalei $D_{EBX}$ has tri-palmately parted leaves, petiole in lower leaves, and its ovary has short hair. Whereas Aconitum cliare Dc has $3{\sim}4$ parted leaves, long petiole, and its ovary has not hair. 2. Aconitum carmichalei $D_{EBX}$ has cylinder shape is relatively small in length and diameter, is greyish brown blacky brown in outer surface, greyish $white{\sim}dark$ gray in section. 3. According to the collection place, there is a remarkable difference in the physical shape of herbal states. Aconiti Lateralis Radix Preparate(medicated in Korea) is more transparent blacky brown color than Aconiti Lateralis Fadix Preparata(medicated in Chian). Also Black Aconi Radix(墨附片) has exodermis and White Aconi Radix(白附片) has not. 4. The internal characteristics entirely correspond to in internal shape described in the literatures, Only it is possible to discriminate between black Aconi Radix(墨附片) and White Aconi Radix(白附片) by the existence of cork layer. The classification between Aconiti Lateralis Radix Preparata and Aconiti Ciliare Tuber makes entirely Tuber makes entirely remarkable difference in the physical shape of cambium layer Namely, in shape of cambium layer the kinds of Aconiti lateralis Radix Prepala has horn-like shape and the kinds of Aconiti Ciliare Tuber has circle-like shape. 5. In the peak of examination substance in comparison to Rt of the index material diterpene alkaloid mesaconitine, aconitine, hypaconitine chromatogram Aconiti Ciliare Tuber is higher than in Aconiti Lateralis Radix Preparata This explain that the component changes after the process of medicine. 6. In the Content of mesaconitine, aconitine and hypaconitime Aconiti Ciliare Tuber is higher than Aconiti Lateralis Radix Preparata. 7. In Aconiti Lateralis Radix Preparata, aconitine, hypaconitine and mesaconitine each appears in Rf 0.46, 0.54, 0.32. But except Aconiti Ciliare Tuber the band does not appear. For the future, such results will be used as the basic source of additional research, and a far-reaching comparative study is needed to distinguish between many kinds of same genus-degree of relatedness.

• 한국CDE학회논문집
• /
• 제13권6호
• /
• pp.403-411
• /
• 2008

The alignment of facial images is crucial for 2D face recognition. This is the same to facial meshes for 3D face recognition. Most of the 3D face recognition methods refer to 3D alignment but do not describe their approaches in details. In this paper, we focus on describing an automatic 3D alignment in viewpoint of quantitative analysis. This paper presents a framework of 3D face alignment and normalization based on feature points obtained by Active Shape Models (ASMs). The positions of eyes and mouth can give possibility of aligning the 3D face exactly in three-dimension space. The rotational transform on each axis is defined with respect to the reference position. In aligning process, the rotational transform converts an input 3D faces with large pose variations to the reference frontal view. The part of face is flopped from the aligned face using the sphere region centered at the nose tip of 3D face. The cropped face is shifted and brought into the frame with specified size for normalizing. Subsequently, the interpolation is carried to the face for sampling at equal interval and filling holes. The color interpolation is also carried at the same interval. The outputs are normalized 2D and 3D face which can be used for face recognition. Finally, we carry two sets of experiments to measure aligning errors and evaluate the performance of suggested process.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.116-117
• /
• 2006

I-D ZnO nanostructures were fabricated by thermal evaporation method on Si(100), GaN and $Al_2O_3$ substrates without a catalyst at the reaction temperature of $700^{\circ}C$. Only pure Zn powder was used as a source material and Ar was used as a carrier gas. The shape and growth direction of synthesized ZnO nanostructures is determined by the crystal structure and the lattice mismatch between ZnO and substrates. The ZnO nanostructure on Si substrate were inclined regardless of their substrate orientation. The origin of ZnO/Si interface is highly lattice-mismatched and the surface of the Si substrate inevitably has the $SiO_2$ layer. The ZnO nanostructure on the $Al_2O_3$ substrate was synthesized into the rod shape and grown into particular direction. For the GaN substrate, however, ZnO nanostructure with the honeycomb-like shape was vertically grown, owing to the similar lattice parameter with GaN substrate.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.237-247
• /
• 2011

현수교의 초기평형상태를 결정하기 위한 개선된 초기부재력법을 제시한다. 먼저 현수교의 주케이블과 행어가 만나는 절점에서 힘의 평형조건을 이용하여 초기평형상태를 결정한 뒤, 이 때 계산된 주 케이블의 절점좌표와 각 케이블 부재의 무응력장을 입력 값으로 하여 초기부재력을 도입한 비선형 해석을 수행하였다. 일반적인 초기부재력법의 경우 각 단계에서 계산된 부재력을 통하여 케이블의 무응력장을 재산정하지만, 본 연구에서는 각 케이블 부재의 무응력장을 매 계산 단계에서 고정된 값으로 취한다. 2차원 및 3차원 현수교 모델에 공통적으로 적용할 수 있다. 수치예제 결과 값의 비교를 통하여 연구의 타당성을 검증하였다.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.327-332
• /
• 2023

As interest in eco-friendly and fuel-efficient electric vehicles has increased globally, there has also been a growing interest in the efficiency, vibration, and noise of motors for electric vehicles Electric vehicles generally have significantly lower driving ranges per charge compared to the maximum driving range per fueling of internal combustion engine vehicles. Additionally, there are issues with various vibrations and noise generated by the motor that can cause discomfort for passengers. Therefore, research is necessary to reduce losses, vibration, and noise of the motor to improve the driving range of electric vehicles. IPMSM with a purchased design can obtain additional reluctance torque by utilizing the difference in inductance between the d and q axes. However, due to this reluctance torque, torque ripple occurs larger than other motors. The increase in torque ripple also increases noise and vibration. Since the reluctance torque, which is the main cause of torque ripple, is determined by the shape of the motor components, torque ripple can be reduced through shape optimization. In this paper, a rotor shape for reducing torque ripple and core loss that causes vibration, noise, and efficiency to decrease of IPMSM for electric vehicles was proposed. Optimization design was carried out by changing the shape of the q-axis path of the rotor to reduce the difference in inductance of the d and q-axis of the rotor. Finally, in order to verify the validity of the design variables derived through the optimal design, the original model and the improved model were compared through the FEM. Compared to the original model, the improved model's torque verifying ripple was reduced by about 62% and core loss was reduced by about 29%, the superiority of the improved model.

• 비파괴검사학회지
• /
• 제35권2호
• /
• pp.128-133
• /
• 2015

원격진료를 요하는 응급현장에서 사용을 위하여 1차원 배열 탐촉자를 손으로 조작하는 동안 변하는 방사빔의 위치를 추적하여 정적인 3차원 초음파영상을 구성하였다. 탐촉자에 고정된 모션센서의 병진운동 및 회전운동에 대한 정보를 기준직교좌표계로 변환하는 이론적 모델을 제시하였으며, 신호 증폭과 시리얼 통신을 위한 인터페이스 용도의 모듈을 상용의 센서를 사용하여 제작하였다. 실리콘 퍼티로 제작된 시험용 팬텀에 대한 B-모드의 동영상과 센서의 신호를 동기화하여 기록하였다. 동영상으로부터 주기적으로 추출한 B-모드 영상과 각 영상내의 픽셀 각각의 그레이 레벨을 이용하여 3차원 복셀의 그레이 레벨을 재구성하였다. 이 복셀의 데이터를 이용하여 3차원 영상과 임의단면의 B-모드 방식의 2차원 영상을 구성하였으며, 이 영상들은 시험용 팬텀의 형상과 잘 일치하였다.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.

• 디지털콘텐츠학회 논문지
• /
• 제9권2호
• /
• pp.363-369
• /
• 2008

본 논문에서는 superquadric과 Z-버퍼 (Z-buffer) CSG (Constructive Solid Geometry) 렌더링 알고리즘을 이용한 3차원 물체 형상 모델링의 방법을 제안하였다. Superquadric은 몇 개의 계수만으로 다양한 형태의 3차원 모델을 얻을 수 있다. 그리고 CSG 트리 (tree)를 이루는 각각의 기본소 (primitive)는 superquadric과 변형된 superquadric을 가지고 표현하였다. CSG 트리를 구성하는 기본소들간의 집합 연산은 Z-버퍼 알고리즘과 스텐실 버퍼 (stencil buffer)를 사용하여 효과적으로 정의하였다. 본 논문에서 제안한 알고리즘은 단순히 물체의 깊이정보를 비교하여 표현하기 때문에 기존의 implicit 함수를 이용한 물체 표현법에서 각각의 물체의 좌표계를 고려해야 하는 문제점을 해결할 수 있다.

• 한국정밀공학회지
• /
• 제34권4호
• /
• pp.293-298
• /
• 2017

In this study, we developed a 3D chocolate printer and studied the conditions needed for chocolate printing. Because chocolate is a mixture of cocoa mass, cocoa butter and sugar particles, its properties vary with temperature, and care is required in melting and extrusion. A chocolate supply unit is composed of a heating block and a syringe pump. It is integrated with a 3-axis linear robot. In order to be more accurate than the existing 3D chocolate printer is, the system was configured so that the printing line width became $430{\mu}m$. Printing performance was studied according to various parameters. The condition needed for printing lines with a stable width was discovered by the experimental design method and has been confirmed by a 2D line test. These 3D printing experiments showed that it was possible to build a 3D shape with an inclination angle of up to $45^{\circ}$ without support. Further, chocolate printing of a 3D shape has been successfully verified with the developed system.

• 한국추진공학회지
• /
• 제25권2호
• /
• pp.1-11
• /
• 2021

연소기 내부의 공동은 낮은 속도의 재순환영역과 유동의 진동을 일으켜 연료와 공기의 혼합 효율을 증대시키고, 화염을 유지함으로써 지속적인 연소를 가능하게 한다. 본 연구에서는 공동의 형상 인자에 따른 내부 유동의 특성을 실험과 2차원 전산해석을 통해 관찰하였다. 초음속 연소기 내 유동은 단순히 L/D 이외에도 다양한 공동 형상인자에 따라 크게 영향을 받는 것이 관찰되었다. 동일 L/D에서도 공동의 깊이에 따라 open과 closed 형태가 나타남을 확인하였고, 공동의 후방 경사각, 연소기 높이도 유동 특성이 달라지며, 이는 전압력 손실에 큰 영향을 미치는 것을 확인하였다.