• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.214-218
• /
• 2010

This research was to judge on the gathered skirt's shape by visual images that was from the different gathered skirts according to different sewing conditions; fabrics(cotton, mixed-wool, polyester), ratio of gathers(1.5T, 2.0T, 2.5T). Questionnaire consists of 33 semantic differential scale expressing gathered skirt's image, and 10 items of the shape were measured by 3D measurements method. The data were analyzes by factor analysis, correlation analysis, ANOVA. The image of gathered skirts was composed of the five factors of activities, attraction, grace, softness, and ordinary and it was showed that these five factors occupied 68.4% of the total variance. The shape of gathered skirts was composed of the two factors of the side and the front, and it was showed that these two factors occupied 93.6% of the total variance. According to correlation analysis of visual shape, the front was significant in activities, attraction and ordinary, and the side was significant in activities, grace and ordinary. As a result of ANOVA, the visual images were significant in ratio of gathers. 2.5 ratio of gathered skirts were perceived to be more active and attractive, and 1.5 ratio of gathered skirts were more ordinary and graceful.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.871-884
• /
• 2015

유체이송 기술은 마이크로 유체시스템 개발에서 핵심문제로 인식되고 있다. 최근 명(2014)은 외부동력을 사용하지 않고 액적을 이동시킬 수 있는 새로운 개념을 제안하고, 초기에 반원통형 형상을 가지는 가상의 2차원 액적에 대한 수치해석을 통해 이 개념이 성립함을 보였다. 또한 명과 권(2015)은 친수성/소수성 표면위에서 초기 3차원 반구 형상의 실제 물 액적이송의 메커니즘을 시간에 따른 액적형상과 액적 내부의 운동에너지, 중력에너지, 표면자유에너지 및 압력에너지의 수치해석 결과를 통해 규명하였다. 본 연구는 새로운 개념을 확립시키기 위해 초기 구형액적에 대한 3차원 수치해석을 수행하고, 액적이송의 메커니즘을 모세관력 힘의 불균형 관점에서 액적 형상과 다양한 에너지의 수치해석 결과를 통해 규명하였다.

• Elastomers and Composites
• /
• 제35권2호
• /
• pp.138-148
• /
• 2000

EPDM 발포체의 정적/동적 특성을 측정하여 재료 특성과 진동 특성과의 연관성을 알아보고 이로부터 충격음 저감재로서의 적용 가능성을 검토하였다. 정적/동적 특성은 material test system (MTS)를 사용하여 시편의 형상, 두께, 초기하중, 발포도 등에 따라 정적 탄성계수, 동적 탄성계수, 전달율의 변화를 조사하였다. 정적 탄성계수와 동적 탄성계수의 경우, 형상이 단순하고 두께가 얇을수록 큰 값을 나타냈고, 전달율과 동적 탄성계수는 상호 비례 관계에 있음을 확인할 수 있었다. 특징적으로 동적 탄성계수가 증가하면, 전달율의 특성 피크치는 같은 주파수 영역에서의 증가 혹은 고주파수 영역으로의 전이의 형태로 일어나게 되는 것을 알 수 있었다. 실험실적 모사 시험장치를 통해 충격에 따른 주파수별 진동 속도측정과 유한 요소 해석 모델을 사용하여 mode shape에 의한 충격 해석 결과를 알아보았는데, EPDM 발포체를 사용함으로써 2.5-3.5배의 진동 속도 저감이 이루어짐을 알 수 있었고, mode shape의 경우 몰타르와 콘크리트만으로 구성된 구조물에 비해 진동 충격에 대한 변위가 급감함으로써 충격음 저감재로서의 EPDM 발포체의 적용 가능성은 상당히 높은 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.534-538
• /
• 2004

On this study, we improved diaphgram for micro speaker performance using Taguchi method in discrete design space. The design of diaphgram has an effect on performance of micro speaker such as, thickness of diaphgram, shape of diaphgram, etc. Therefore this study carried to decide shape of diaphgram and thickness of diaphgram for minimizing 2nd natural frequency of diaphgram using Taguchi method. we showed improved design factors that minimized 2nd natural frequency of diaphgram. Also, 2nd natural frequency of diaphgram for micro speaker is reduced up to 37 percent maintaining twist mode shape. From the results of ANOVA, 2nd natural frequency of diaphgram for micro speaker have an effect on position of the outer curved shape and thickness of diaphgram.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.1018-1026
• /
• 2005

Recent development of 3D scanner and software is regarded as a promising method of acquiring replicas from human body indirectly. It would be very helpful if we could predict the characteristics of 2D pattern from the simple parameters related to 3D shape for ordinary user. Therefore, in this study, investigation of 2D pattern of waist/abdominal area from the 3D geometrical model was conducted for the pattern development of waist nipper. To create body models and develop the surface of them, one ortho commonly used CAD/CAM program, IDEAS(UGS-plm solutions, USA) was used. As for the size of the models, the width, thickness, and circumference ranges of adult women's torso reported in National Anthropometric Survey of Korea (1997) were used as a standard model. Seven size variations were made by changing the width of the waist only, from 19 cm to 40 cm. Therefore, simulated body models include not only the normal body but also obese body who has wider waist and abdomen width than hip width. As results, it was found that the curvature of the unfolded 2D pattern around the abdominal area decreases as the waist width increases. As the width of the waist increases more and more, so that the comparative ratios around the torso becomes in abnormal ranges, there appears inflection points and the direction of curvature was changed. 2D Patterns obtained in this research were quantified by curvature, length of the curve and angle of deflection in the reference frame box for the convenience of the actual pattern making process. It was also possible to find that the shape of patterns of abnormal body resulted in a quite interesting change in the curves of 2D pattern, which could be applied to the custom made waist nipper for obese women.

• 한국지역사회생활과학회지
• /
• 제23권2호
• /
• pp.189-198
• /
• 2012

This study aim was to understand the effects of the change of the sleeve cap height on the sleeve cap line and the sleeve appearance by making nine different sleeve cap height patterns. When a subject sews the virtual and real garments with this, it provides data base through which she can make the suitable sleeve by conducting a comparative analysis of the appearance and cross-sectional diagram and grasping the relation between the sleeve cap line ease and the shape of the sleeve. As a result of the analysis of the image of 3D virtual garment, the shape of the armscye and the position of the bust line and sleeve baseline, the sleeve cap height and the sewing ease of the sleeve cap line affect on the shape of the sleeve and the armscye. Although the real garment is slightly different from the virtual garment they have shown similar tendency. Therefore, if the 3D virtual clothing system is used appropriately, it is possible to expect various study results in the apparel field without making real garments.

• 한국멀티미디어학회논문지
• /
• 제22권4호
• /
• pp.491-501
• /
• 2019

Variational methods, which cast deformation as an energy-minimization problem, are known to provide a good trade-off between practicality and speed. However, the time required to deform a fully detailed shape means that these methods are largely unsuitable for real-time applications. We simplify a 2D shape into a curve skeleton, which can be deformed much more rapidly than the original shape. The curve skeleton also provides a simplified control for the user, utilizing a small number of control handles. Our system deforms the curve skeleton using an energy-minimization method and then applies the resulting deformation to the original shape using linear blend skinning. This approach effectively reduces the size of the variational optimization problem while producing deformations of a similar quality to those obtained from full-scale nonlinear variational methods.

• 한국유체기계학회 논문집
• /
• 제9권3호
• /
• pp.7-13
• /
• 2006

Shape optimization of a rotor blade in a single-stage transonic axial compressor has been performed using a response surface method and three-dimensional Navier-Stokes analysis. Two shape variables of the rotor blade, which are used to define a blade skew, are introduced to increase an adiabatic efficiency. Throughout the shape optimization of a rotor blade, the adiabatic efficiency is increased to about 2.2 percent compared to that of the reference shape of the stator. The increase in efficiency for the optimal shape of the rotor is due to the pressure enhancement, which is mainly caused by moving the separation position on the suction surface of rotor blade to the downstream direction.

• 대한치과의사협회지
• /
• 제12권3호
• /
• pp.163-165
• /
• 1974

The shape and size of the various regions of the temporomandibular ligament were examined in 30 Korean cadavers, which were used for dissection in Seoul Dental College from 1970 to 1973. The results were as follows; 1. The shape of the temporomandibular ligament were as follows; a. Type I : fan shape (8mm in width between origin and insertion) - 20.2% b. Type II : fan shape (10mm in width between origin and insertion) - 70.0% c. Type III : fan shape (12mm in width between origin and insertion) - 10.0% 2. The length of the various regions of the temporomandibular ligament were as follows ; a. Length in origin - 13.4mm b. Length in insertion - 6.0mm c. Length in anterior margin - 25.8mm d. Length in posterior margin - 19.3mm

• 한국환경과학회지
• /
• 제18권2호
• /
• pp.221-230
• /
• 2009

In this study, a river basin with a lot of measured data such as water level, flow rate, current speed, and sediment rate from the past to now was selected and geometrical shape of a pier was re-analyzed, in order to study the effects of the flow around the pier area as well as the riverbed alternation characteristics. A finite element mesh of the entire river was prepared, and via parameter revision, the section that the pier has influence on was decided, to analyze the shape of the pier using RMA-2 and SED2D-WES models. With regards to the section that the pier has influence on, analysis was done on the four pier shapes, namely circle, square, rectangle, and octagon. The results showed that the shape with the least influence around the pier around is the octagon, followed by circle, rectangle, and square, showing the different geometrical effects that the shapes have on the pier. Furthermore, it was shown that the distribution of sediment concentration had effect from about (+) 110 m of the upstream to about (-) 130 m of the downstream, from the pier installation point. Also, it was shown after analyzing drag forces for different sediment particle distributions that the shape with the greatest drag is the octagon, followed by circle, square, and rectangle.