• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.83-88
• /
• 2015

Coating materials used in the electron beam (EB) deposition method, which is being studied as one of the fabrication methods of thermal barrier coating, are exposed to high power electron beam at focused area during the EB deposition. Therefore the coating source for EB process is needed to form as ingot with appropriate density and microstructure to sustain their shape and stable melts status during EB deposition. In this study, we tried to find the optimum powder condition for fabrication of ingot of 8 wt% yttria stabilized zirconia which can be used for EB irradiation. It seems that the ingot, which is fabricated through bi-modal type initial powder mixture which consists of tens of micro and nano size particles, was shown better performance than the ingot which is fabricated using monolithic nanoscale powder when exposed to high power EB.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.38-45
• /
• 1995

The objective of this study was to investigate the effect of temperature on the formation of CaCO, polymorphs(i.e.,calcite, aragonite, vaterite) and on the crystal shape of CaCO,.The reaction systems were rnvestigated at the temperature range of 2.0%-85.3r, at the fixed cmditions ofconcentration and pressure, 2X10-' M, atomospheric pressure, respectively.The reaction systems studied include a Ca(HCO.,),-Air bubble, O Ca(OH)s-CO,, @ Ca(OH),-H,CO, ,Ca(OH1,-Na>CO,, O Ca(OH),-K,CO,, @ Ca(OH),-(NH,),CO,, D CaC1,-Na,CO,, CaC1,-K3C03, 8 CaC1,-(NH,,),CO,, 0 Ca(N0,X-Na,CO,, 03 Ca(N0,X-QCO,. 0 Ca(NO,),-(NH,XCO,. The results obtained are summarizedas follows:Calcite is formed at the temperature range of 2t-80"C and the highest calcite yield was obtained at 30%.Aragonite begins to be formed at the temperature range of 41.0%-53.0%. and the higher temperature is thehigher yield is obtained. pH of the reaction system affect the yield of aragonite, and the yield reaches the highestpercentage at the pH range of 10.0-11.0, and at the conditions of pH 12.3 or over, aragonite is scarcely formed.Vaterlle is fnrmed at the temperature range of 40.0% or less, and transites utterly to calcite within 10-60mmutes in the case of bemg residenced in mother liqmd which C1 is not contained, and within 140hours inthe case of containing CI-.s in the case of containing CI-.

• Applied Microscopy
• /
• v.18 no.2
• /
• pp.1-20
• /
• 1988

The species of the slug used in the experiment is Limax flavus L. For identifying the chemical characteristics of the epidermis, granules and mucus-producing cell of this animal is examined with methylene blue-basic fuchsin double stain and PAS-alcian blue reagent. For the ultrastructural research of the epidermal free surface, the epitheial cell and the parenchymal cell are used with scanning electron microscope and transmission elec-tron microscope respectively. I . Epidermal tissue The epidermal tissue of the slug is observed being divided into the dorsal and the ventral side(toot pad) respectively. 1) Dorsal epidermal tissue The dorsal epidermis of the slug is constituted with the simple columnar epithelium and the microvilli are compacted on the epidermal free surface. Two different types of the secretory granules of the neutral and the acid mucus are observed between the epithelial cells, and the neutral mucous granules are highest electron-dense but the acid mucous granules are observed to be electron-lucent. 2) Foot epidermal tissue The Foot epidermis is formed with the taller simple columnar epithelium than the dorsal epidermis and these cells have both a large number of the microvilli and a few number of the large villi. The secretory granules of three different types, which are acid, neutral and mixed mucous granule of two different types are observed between the epithelial cells. The neutral mucous granules are highest electron dense but the acid mucous granules are observed to be electron-lucent. II . Mucous granule-producing cell and mucus-producing cells Seven different types of the granules-producing cell and the mucus-producing cells are observed between the parenchyma. 1) A-type of acid mucous granule-producing cell The electron-lucent granules are largely occupied in the cytoplasm of these cells and then the granules are surrounded by irregular membrane. These electron-lucent granules exhibit alcianophilia with PAS-alcian blue reaction, so these granules are certified to be acid mucopolysaccharide. 2) B-type of acid mucus-producing cell The nucleus and the cytoplasm of these cells are pushed by the acid mucus of the electron-lucent toward the cell membrane. This mucus has been confirmed to be the acid mucopolysaccharide with PAS-alcian blue reagent. 3) A-type of neutral mucous granule-producing cell These cells contain the electron-dense round granules with approximately $1{\mu}m$ in diameter, which exhibit strongly PAS-positive reaction. These granules are confirmed to be the neutral mucoplysaccharide. 4) B-type of neutral mucous granule-producing cell These cells contain two different types of electron dense granules and electron-lucent granules; The former exhibits to be strongly PAS-positive and the latter to have alcianophilia reaction respectively. 5) C-type of neutral mucus-producing cell These cells are similar to the shape and the size of the B-type of mucus-producing cell but these two different types of cells are stained with reversing properties to each other. The mucus of the C-type cell that electron-lucent is largely occupied in the cytoplasm that exhibits strongly PAS-positive reaction. 6) D-type of neutral mucous granule-producing cell These cells contain round granules about $1{\mu}m$ in size which are observed to be medium electron-dense granules and those granules are stained brightly red with PAS-weak positive reaction. The granules are certified to be neutral mucopolysaccharide. 7) E-type of neutral mucous granule-producing cell These cells are similar to the shape and the size of the D-type of neutral mucous granule-producing cell. These cells contain a large number of granules with about $1{\mu}m$ in diameter showing electron-lucent and then granules are seen to be PAS-weak positive reaction. III. Parenchyma The clear cell and dark cell are found in the parenchyma of the Limax flavus L. 1) Clear cell These cells are round formed and the nucleus of the cells are larger than cytoplasm. These cells which have the electron-lucent cytosol possess poorly developed organelles. 2) Dark cell These cells are found to be dark cells due to high electron-density, which exhibit strongly methylene-blue reaction from double stain of methylene blue-basic fuchsin.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.117-128
• /
• 2014

Generally, when constructing a tunnel close to existing structures, the tunnel must be built at a constant distance from the structures that is more than width of tunnel to minimize the impact of interference between an existing structures and new tunnel. Spacing of these closed tunnels should be designed considering soil state, size of tunnel and reinforcement method. Particularly when the ground is soft, a care should be taken with the tunnel plans because the closer the tunnel is to the existing structures, the greater the deformation becomes. As methods of reviewing the effect of cavities on the stability of a tunnel, field measurement, numerical analysis and scaled model test can be considered. In the methods, the scaled model test can reproduce the engineering characteristics of a rock in a field condition and the shape of structures using the scale factor even not all conditions cannot be considered. In this study, when construction of a tunnel close to existing structures, the method and considering factors of the scaled model test were studied to predict the actual tunnel behavior in planning stage. Furthermore, model test results were compared with the numerical analysis results for verifying the proposed model test procedure. Also, practical results were derived to verify the stability of a tunnel vis-a-vis cavities through the scaled model test, which assumed spacing distances of 0.25 D, 0.50 D, and 1.00 D between the cavities and tunnel as well as the network state distribution. The spacing distances of 1.0 D is evaluated as the critical distance by the results of model test and numerical analysis.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.260-267
• /
• 2013

The aim of this study was to analyze the three dimensional characteristics of the size, shape and location of mesiodens and their effect on permanent teeth arrangement using Cone-beam computed tomography(CBCT). 191 patients under 15 years old who had visited the hospital between June 2006 and December 2012 and taken CBCT were investigated. Among them, 43 patients with diastema were analyzed to investigate the correlation between the amount of diastema and the mesiodens. The results showed that mesiodens were found in males 3.9 times more than females and found most in 7 years old. The mean length of mesiodens was 13 mm and the width was 6.8 mm. The conical shape comprised of 52.9%. Many mesiodens were located in the palatal side rather than the labial side and located vertically near the crown. 63.0% of mesiodens were reversed and the common complications were delayed eruption followed by diastema, and teeth rotation. And the amount of diastema had correlation with size and mesiodistal position of the mesiodens. The current study used 3D analysis to show the size and position of mesiodens and occurrence distribution of complication. Among these, the amount of diastema had shown the correlation with the size and mesiodistal position of mesiodens.

• Imaging Science in Dentistry
• /
• v.47 no.3
• /
• pp.165-174
• /
• 2017

Purpose: This study was performed to investigate the influence of object shape and distance from the center of the image on the volumetric accuracy of cone-beam computed tomography (CBCT) scans, according to different parameters of tube voltage and current. Materials and Methods: Four geometric objects(cylinder, cube, pyramid, and hexagon) with predefined dimensions were fabricated. The objects consisted of Teflon-perfluoroalkoxy embedded in a hydrocolloid matrix (Dupli-Coe-Loid TM; GC America Inc., Alsip, IL, USA), encased in an acrylic resin cylinder assembly. An Alphard Vega Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) was used to acquire CBCT images. OnDemand 3D (CyberMed Inc., Seoul, Korea) software was used for object segmentation and image analysis. The accuracy was expressed by the volume error (VE). The VE was calculated under 3 different exposure settings. The measured volumes of the objects were compared to the true volumes for statistical analysis. Results: The mean VE ranged from -4.47% to 2.35%. There was no significant relationship between an object's shape and the VE. A significant correlation was found between the distance of the object to the center of the image and the VE. Tube voltage affected the volume measurements and the VE, but tube current did not. Conclusion: The evaluated CBCT device provided satisfactory volume measurements. To assess volume measurements, it might be sufficient to use serial scans with a high resolution, but a low dose. This information may provide useful guidance for assessing volume measurements.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.630-641
• /
• 2002

The purpose of this study is to suggest the standard of bodytype which offers various data with regard to three-dimensional characteristics of body, and which offers the criterion for the sizes and shapes to interpret various bodytypes, to estimate filling, and to construct ready-made clothing. In this study, standard bodytype was defined as a typical type with beautiful proportion and shape which a large number of people have, too. In order to continue this study, there were two ways of analyzing bodytypes of subjects in the view of statistics and beauty. We primarily carried on statistical analysis in this report. Taken as a sample, the subjects were ninety-seven females who were between the ages of 18 and 24 years o1d. They were measured on November 1999. The data of seven hundred and few females, 18∼24 year-old, from the National Somatometry Survey of 1997 were used for analysis, too. Three kinds of classification methods were used for statistical analysis. The first method was based on the lateral view of the body, the second was based on the Factor and Cluster analysis of the photographic measurements of each of the anterior and lateral body, and the third was based on the Factor and Cluster analysis of the anthropometric measurements of the whole body. From the analysis on the distribution of R hrer Index the difference of width, the difference of depth, the proportion of height and head height, the High-frequency Proportion(H.P.)range were selected. The straight type from the lateral view, High-frequency type from each method, and subjects in H.P. range were compared with each other. As the result, it was confirmed that it is proper to base on the size and shape of subjects in H.P. range to analyze the standard bodytype.

• Korean journal of applied entomology
• /
• v.33 no.2
• /
• pp.60-65
• /
• 1994

This study was carried out to investigate the ecology of Nesodiprion japonlcus (Mmm,m) damaging many conifers The results obtained were as follows: Nesod~prion japonicus (Maun) emerged two times for a year and their body was black m both sexes. A female (10.1t 1 2 mm) adult was larger than a male (9.9t 0.8 mm) one in the body size. The size of antenna as plumose of female was different from that of male. Life span of adults was 3 or 4 days, those emergence rate was 92% and sex ratio of female to male was 6: 4. Adults 1a1d only an egg in the leaf and the region of the leaf aviposited turned brown. Duration of egg was 14.35 1 2 days, egg was In the shape of banana and red~sh-yellow,a nd its sire was 2.4+ 0.2 mm long. Duration of larvae was 30.35 2.1 days and its slze 20.15 2.2 mm, body was green with grey~sh shipes on the dorsal and lateral aspect, the tip of front and hind was yellow and head was brown with a dark-p~gmented area. Mature larva turned into light green and get lost a dark-pigmented area of head. The firstly-emerged larva made cocoons on the base of leaves and the secondawemerged larva among fallen leaves Duration of prepupa was 14.3f 2.0 days and their size 10.15 2.3 mm Duration of pupa was 12.2+ 1.3 days and its size 10.lt0.2mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.31-31
• /
• 2010

The growth of the high-quality GaN epilayers is of significant technological importance because of their commercializedoptoelectronic applications as high-brightness light-emitting diodes (LEDs) and laser diodes (LDs) in the visible and ultraviolet spectral range. The GaN-based heterostructural epilayers have the polar c-axis of the hexagonal structure perpendicular to the interfaces of the active layers. The Ga and N atoms in the c-GaN are alternatively stacked along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs, the stress applied along the same axis contributes topiezoelectric polarization, and thus the total polarization is determined as the sum of spontaneous and piezoelectric polarizations. The total polarization in the c-GaN heterolayers, which can generate internal fields and spatial separation of the electron and hole wave functions and consequently a decrease of efficiency and peak shift. One of the possible solutions to eliminate these undesirable effects is to grow GaN-based epilayers in nonpolar orientations. The polarization effects in the GaN are eliminated by growing the films along the nonpolar [$11\bar{2}0$] ($\alpha$-GaN) or [$1\bar{1}00$] (m-GaN) orientation. Although the use of the nonpolar epilayers in wurtzite structure clearly removes the polarization matters, however, it induces another problem related to the formation of a high density of planar defects. The large lattice mismatch between sapphiresubstrates and GaN layers leads to a high density of defects (dislocations and stacking faults). The dominant defects observed in the GaN epilayers with wurtzite structure are one-dimensional (1D) dislocations and two-dimensional (2D) stacking faults. In particular, the 1D threading dislocations in the c-GaN are generated from the film/substrate interface due to their large lattice and thermal coefficient mismatch. However, because the c-GaN epilayers were grown along the normal direction to the basal slip planes, the generation of basal stacking faults (BSFs) is localized on the c-plane and the generated BSFs did not propagate into the surface during the growth. Thus, the primary defects in the c-GaN epilayers are 1D threading dislocations. Occasionally, the particular planar defects such as prismatic stacking faults (PSFs) and inversion domain boundaries are observed. However, since the basal slip planes in the $\alpha$-GaN are parallel to the growth direction unlike c-GaN, the BSFs with lower formation energy can be easily formed along the growth direction, where the BSFs propagate straightly into the surface. Consequently, the lattice mismatch between film and substrate in $\alpha$-GaN epilayers is mainly relaxed through the formation of BSFs. These 2D planar defects are placed along only one direction in the cross-sectional view. Thus, the nonpolar $\alpha$-GaN films have different atomic arrangements along the two orthogonal directions ($[0001]_{GaN}$ and $[\bar{1}100]_{GaN}$ axes) on the $\alpha$-plane, which are expected to induce anisotropic biaxial strain. In this study, the anisotropic strain relaxation behaviors in the nonpolar $\alpha$-GaN epilayers grown on ($1\bar{1}02$) r-plane sapphire substrates by metalorganic chemical vapor deposition (MOCVO) were investigated, and the formation mechanism of the abnormal zigzag shape PSFs was discussed using high-resolution transmission electron microscope (HRTEM).