• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.263-267
• /
• 2006

A new thermal bimorph actuator for large out-of-plane displacement is designed, fabricated and tested. The deflecting beam is composed of polyimide, heater, and polyvinyl difluorides with tetrafluoroethylene (PVDF-TrFE). The large difference of coefficient of thermal expansion (CTE) of two polymer layers (polyimide and PVDF-TrFE) can generate a significant deflection with relatively small temperature rise. Compared to the most conventional micro actuators based on MEMS (micro-electro mechanical system) technology, a large displacement, over 1 mm at 20 mW, could be achieved. Additionally, we can achieve response time of 14.6 ms, resonance frequency of 12 Hz, and reliability ability of $10^5$ cycles. The proposed actuator can find applications where a large vertical displacement is needed while maintaining compact overall device size, such as a micro zooming lens, micro mirror, micro valve and optical application.

• 센서학회지
• /
• 제13권2호
• /
• pp.121-127
• /
• 2004

A reflection type optical fiber line sensor based on the speckle detection has been developed using the optical fiber mirror with the reflectance of 72 %. Some experiments were carried on with the automobile and the 500 m length multimod fiber. When the automobile passed on the fiber sensor, two abrupt changes of the output waveform occured like the transmission type sensor based on the speckle variations. The signal to noise ratio of this sensor was about 40 dB.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.111-117
• /
• 2011

Full-range spectral domain optical coherence tomography (SD-OCT) with a 1-${\mu}m$ band light source is shown here. The phase of the reference beam is continuously stepped while the probing beam scans the sample laterally (B-scan). The two dimensional spectral interferogram obtained is processed by a Fourier transform method to obtain a complex spectrum leading to a full-range OCT image. A detailed mathematical explanation of the complex conjugate resolving method utilized is provided. The system's measurement speed was 7.96 kHz, the measured axial resolution was $9.6{\mu}m$ in air and the maximum sensitivity 99.4 dB. To demonstrate the effect of mirror image elimination, In vivo human eye pathology was measured.

• Imaging Science in Dentistry
• /
• 제50권1호
• /
• pp.15-22
• /
• 2020

Purpose: This study was conducted to objectively and subjectively compare the accuracy and reliability of 2-dimensional(2D) photography and 3-dimensional(3D) soft tissue imaging. Materials and Methods: Facial images of 50 volunteers(25 males, 25 females) were captured with a Nikon D800 2D camera (Nikon Corporation, Tokyo, Japan), 3D stereophotogrammetry (SPG), and laser scanning (LS). All subjects were imaged in a relaxed, closed-mouth position with a normal smile. The 2D images were then exported to Mirror^® Software (Canfield Scientific, Inc, NJ, USA) and the 3D images into Proplan CMF^® software (version 2.1, Materialise HQ, Leuven, Belgium) for further evaluation. For an objective evaluation, 2 observers identified soft tissue landmarks and performed linear measurements on subjects' faces (direct measurements) and both linear and angular measurements on all images(indirect measurements). For a qualitative analysis, 10 dental observers and an expert in facial imaging (subjective gold standard) completed a questionnaire regarding facial characteristics. The reliability of the quantitative data was evaluated using intraclass correlation coefficients, whereas the Fleiss kappa was calculated for qualitative data. Results: Linear and angular measurements carried out on 2D and 3D images showed excellent inter-observer and intra-observer reliability. The 2D photographs displayed the highest combined total error for linear measurements. SPG performed better than LS, with borderline significance (P=0.052). The qualitative assessment showed no significant differences among the 2D and 3D imaging modalities. Conclusion: SPG was found to a reliable and accurate tool for the morphological evaluation of soft tissue in comparison to 2D imaging and laser scanning.

• 센서학회지
• /
• 제30권5호
• /
• pp.331-336
• /
• 2021

The Non-dispersive Infrared (NDIR) gas sensor has high selectivity, measurement reliability, and long lifespan. Thus, even though the NDIR gas sensor is expensive, it is still widely used for carbon dioxide (CO₂) detection. In this study, to reduce the cost of the NDIR CO₂ gas sensor, we proposed the new optical waveguide structure design based on ready-made gas pipes that can improve the sensitivity by increasing the initial light intensity. The new optical waveguide design is a structure in which a part of the optical waveguide filter is inclined to increase the transmittance of the filter, and a parabolic mirror is installed at the rear end of the filter to focus the infrared rays passing through the filter to the detector. In order to examine the output characteristics of the new optical waveguide structure design, optical simulation was performed for two types of IR-source. As a result, the new optical waveguide structure can improve the sensitivity of the NDIR CO₂ gas sensor by making the infrared rays perpendicular to the filter, increasing the filter transmittance.

• 한국지능시스템학회논문지
• /
• 제24권1호
• /
• pp.1-6
• /
• 2014

본 연구에서 $(2D)^2$ PCA 알고리즘을 이용한 최적 RBFNNs 기반 나이트비전 얼굴인식 시뮬레이터을 설계한다. CCD 카메라로 야간에 이미지를 취득할 경우 조도가 낮기 때문에 인식을 수행하기 어려운 수준의 이미지가 취득되는 문제점이 발생한다. 따라서 본 논문에서는 나이트 비전 카메라를 이용하여 야간 얼굴을 취득하였다. 또한 얼굴과 비얼굴 이미지 영역에서 야간 얼굴 이미지를 검출하기 위해 Ada-Boost 알고리즘을 사용한다. 그리고 히스토그램 평활화를 이용하여 이미지의 왜곡 현상을 최소화 한다. 이렇게 얻어진 고차원 이미지를 저차원으로 축소하기 위해 $(2D)^2$ PCA 알고리즘을 사용했다. 다항식 기반 RBFNNs을 이용한 지능형 패턴 분류 모델을 통하여 얼굴인식을 수행 한다. 마지막으로 차분진화 알고리즘을 사용하여 파라미터를 최적화 한다. $(2D)^2$ PCA를 최적 RBFNNs 기반 나이트비전 얼굴인식 시스템의 성능 평가를 위하여 IC&CI Lab data를 사용하고 실제 얼굴 인식 시스템을 설계한다.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.47-52
• /
• 2004

본 논문에서는 FTTH에 적용하기 적합한 넓은 입력 다이나믹 레인지와 낮은 비트 에러율을 갖는 CMOS 광수신기의 설계를 제안한다. 트랜스임피던스 전치증폭기의 PMOS 피드백 저항을 자신의 출력 신호의 크기에 따라 제어하여 100Mbps까지 60dB의 입력 다이나믹 레인지를 얻었다. 듀티 에러를 최소화시키기 위해 전류 거울 형태의 자동 바이어스 조절 회로를 설계하였다. 2-폴리, 3-메탈, 0.6um CMOS 공정 파라미터를 사용하여 회로 시뮬레이션을 수행하였다. 설계된 수신기는 5V의 전원을 사용할 때 100Mbps에서 130mW 이하의 전력 소비를 보였다.

• 한국의상디자인학회지
• /
• 제25권2호
• /
• pp.31-44
• /
• 2023

Fashion design in the metaverse is not simply a 3D avatar or virtual fashion, it is an important clue for shopping trends, and the role of fashion design has grown even more because avatars and humans are identified and active. This study, I attempts to understand the metaverse platform accurately and find out the scope of fashion design within the metaverse platform. In addition, we want to provide basic data that can expand the field by using fashion design in various ways on the metabus platform. This study investigated and analyzed various metaverse fashion cases, articles, software, and methods used by metaverse fashion creators, and the results are as follows. First, the metaverse platform is a new level of virtual interaction where users and creators communicate through the convergence of augmented reality, lifelogging, mirror world, and virtual world. Second, most of the users of the metaverse platform are generation Z, and metaverse creators who make money by producing avatars or items, including fashion design, are emerging as a new job field. Third, many fashion brands created spaces on the Metaverse platform, collaborated with games, or opened fashion weeks for publicity, marketing, and sales. Fourth, as a 3D program for metaverse fashion creator activities, open-source software is easier and free of charge compared to programs for fashion design specialists, and most costumes can be reproduced, so it will be easier for fashion design majors to utilize.

• 한국광학회지
• /
• 제23권1호
• /
• pp.12-16
• /
• 2012

본 논문에서는 연성 광 인쇄회로기판(printed circuit board, PCB) 개발을 위한 핵심 부품인 연성 광도파로를 자외선 임프린트(ultra violet imprint, UV-imprint) 공정에 의해 제작하고 도파손실, 굴곡손실, 반사손실 및 반복굴곡에 대한 내구성을 측정하였다. 먼저, 초정밀 기계가공에 의해 광도파로 패턴과 $45^{\circ}$ 미러 구조를 포함하는 니켈 마스터를 제작 후 폴리디메틸실록산(polydimethylsiloxane, PDMS)를 이용하여 탄성체 몰드를 역상 복제 하였다. 역상 복제된 PDMS 몰드를 이용해 UV-imprint 공정에 의한 광도파로의 코어패턴과 $45^{\circ}$ 미러면을 동시 형성하여, $45^{\circ}$ 미러가 내장된 광도파로를 제작하였다. 또한, 광도파로의 끝단을 통상적 방법인 V-sawing 공정으로 $45^{\circ}$ 미러 구조를 가공하여 미러 내장형 광도파로와 미러 특성을 비교하였다. 제작된 연성 광도파로는 단위 길이당 0.035 dB/cm의 도파손실을 나타내었으며, 반경 1 mm의 $180^{\circ}$ 굴곡 조건에서 0.77 dB의 굴곡손실을 나타내었다. 또한, 굴곡각도 $135^{\circ}$, 굴곡반경 2.5 mm의 반복굴곡 실험에서 10 만회 이상의 반복굴곡에 대한 우수한 내구성을 확인하였다. 내장된 $45^{\circ}$ 미러의 반사효율을 향상시키기 위해 미러면에 Ni-Au 이중 박막을 증착하여 2.18 dB의 반사손실을 가진 미러내장형 연성 광도파로를 제작하였다.

• Journal of Korean Neurosurgical Society
• /
• 제52권6호
• /
• pp.541-546
• /
• 2012

Objective : The prefabrication of customized cranioplastic implants has been introduced to overcome the difficulties of intra-operative implant molding. The authors present a new technique, which consists of the prefabrication of implant molds using three-dimensional (3D) printers and polymethyl-methacrylate (PMMA) casting. Methods : A total of 16 patients with large skull defects (>100 $cm^2$) underwent cranioplasty between November 2009 and April 2011. For unilateral cranial defects, 3D images of the skull were obtained from preoperative axial 1-mm spiral computed tomography (CT) scans. The image of the implant was generated by a digital subtraction mirror-imaging process using the normal side of the cranium as a model. For bilateral cranial defects, precraniectomy routine spiral CT scan data were merged with postcraniectomy 3D CT images following a smoothing process. Prefabrication of the mold was performed by the 3D printer. Intraoperatively, the PMMA implant was created with the prefabricated mold, and fit into the cranial defect. Results : The median operation time was $184.36{\pm}26.07$ minutes. Postoperative CT scans showed excellent restoration of the symmetrical contours and curvature of the cranium in all cases. The median follow-up period was 23 months (range, 14-28 months). Postoperative infection was developed in one case (6.2%) who had an open wound defect previously. Conclusion : Customized cranioplasty PMMA implants using 3D printer may be a useful technique for the reconstruction of various cranial defects.