• 한국광학회지
• /
• 제19권4호
• /
• pp.327-333
• /
• 2008

일반적으로 NA(Numerical aperture)가 큰 렌즈를 사용하면 획득된 영상의 품질이 좋아진다. 오목거울은 NA가 크면서 직경이 크게 제작하는 비용이 저렴하다. 본 논문에서는3차원 형상 측정용 모아레 영상의 품질향상을 위해 NA가 큰 대구경 오목거울을 이용한 방법을 제안하고 구현하였다.오목거울은 빛을 반사하는 면이 오목한 거울로써, 가까운 거리에 있는 물체를 볼 때, 물체와 모양은 같고 크게 보이는 것이 특징이다. 보통의 경우, 작은 것을 크게 보거나 빛을 모으는데 이용한다. 오목거울의 집광 특징은 볼록거울과 방향만 다를 뿐 동일한 역할을 하고, 수 미터 직경의 대구경으로 제작하기 용이하며, 대구경이면서 $0.8{\sim}2$의 높은 NA를 갖는 오목거울을 구현하기 용이하다. 오목거울의 볼록 렌즈와 동일한 집광 특징을 이용하여 망원경 등의 반사경으로 많이 이용하고 있다. 3차원 영상획득 방법을 위해 필요한 장치는 광을 출사하는 광원,광원으로부터 출사된 광을 집광하기 위한 집광렌즈,집광렌즈를 통해 집광되어 입사되는 광을 투과시키는 격자,격자로부터의 출사 광을 평행광으로 출사하는 영사렌즈,영사렌즈의 평행광을 반사시켜 전량의 광을 측정대상물 쪽으로 출사하는 오목거울 그리고 측정 제품으로부터 반사된 반사광을 획득하는 CCD 카메라를 포함한다. 대구경 오목거울로 NA값을 변화시켜서 표면의 굴곡이 심한 납볼의 영상을 획득하여 품질향상 정도를 평가하였다. NA가 $0.15{\sim}0.8$까지 변화했을 때 영상 내 밝은 부분과 어두운 부분의 차이가 $46{\sim}1.33$배로 변화하여 NA를 높이면 영상의 품질이 향상됨을 알 수 있었다.

• 천문학회보
• /
• 제45권1호
• /
• pp.55.2-55.2
• /
• 2020

Radio relics in the outskirts of galaxy clusters are interpreted as synchrotron radiation due to the relativistic electrons produced via diffusive shock acceleration (DSA) in shocks with low sonic Mach numbers, Ms ≤ 3 in high beta ICM plasma. Electron injection into the DSA process at such weak shocks is one of the key elements, which has yet to be fully understood. In this study, we explore the nature of kinetic microinstabilities excited in weak quasi-perpendicular shocks through 2D particle-in-cell simulations. We find Alfven-ion cyclotron (AIC), whistler, and mirror instabilities can be triggered by ion and electron temperature anisotropy in the immediate downstream of supercritical shocks with Ms > Mcrit ~ 2.3. In particular, AIC instability causes rippling of the shock surface, which in turn generates plasma waves on multi-scales and faciliates the electron preacceleration. Our results may contribute to understanding the origins of radio relics.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.613-620
• /
• 1992

The solvent-dependent photophysical properties of 2-biphenylcarboxylic acid (2BPCA) and 4-biphenylcarboxylic acid(4BPCA), which have a pre-twisted conformation in the ground state, have been investigated. The fluorescence spectra of 4BPCA show vibrational structure with a non-mirror image to the absorption spectra in nonpolar solvent while those of 2BPCA show no structure even in nonpolar solvents. As the solvent polarity increases, the fluorescence spectra become diffuse and broad with a strong red shift resulting in the large Stokes shift. The large fluorescence Stokes shift of BPCA's in polar solvent is also partially due to an intramolecular charge transfer (ICT) interaction in the excited state, as demonstrated by the large dipole moment in the excited state (7.6-10.6 D). The fluorescence decay behaviors of BPCA's (decay-times and their pre-exponential factors) also depend on solvent polarity in agreement with the solvent-dependent properties of the steady-state fluorecence. The data have been discussed in terms of change in the excited-state potential energy surface with respect to change of the dihedral angle of biphenyl moiety.

• 대한환경공학회지
• /
• 제28권2호
• /
• pp.150-157
• /
• 2006

태양산란광을 광원으로 사용하고 DOAS(differential Optical Absorption Spectroscopy) 기술을 이용하여 분석 하여 대기 오염물질의 이차원 공간적 분포를 이미지화 할 수 있는 지상용 원격 모니터링 장비인 Imaging-DOAS 시스템을 소개한다. 인공적 램프를 광원으로 사용하는 능동형 DOAS와 마찬 가지로 수동형 DOAS 기술도 대기 가스상의 물질의 차등흡수 변화(narrow band absorption) 구조를 이용하여 $NO_2,\;SO_2,\;CH_2O$ 등의 다양한 물질을 높은 정밀도를 가지며 측정 할 수 있다. Imaging-DOAS는 스캐닝 거울, 집광 렌즈, 분광기와 CCD, 그리고 시스템을 통합 제어하는 소프트웨어로 이루어져 있으며, 스캐닝 거울로 여러 번 스캐닝을 연속적으로 하여 대기 가스물질의 공간적 이차원 분포를 이미지화 시킨다. 본 연구에서는 개발된 Imaging-DOAS 시스템 구조 및 수신된 신호를 이용한 분석 방법을 소개 하며 처음으로 국내 한 화력 발전소에서 발생되는 $NO_2$ 양의 공간적 분포를 Imaging-DOAS를 이용하여 원격 측정 하였다.

• Journal of International Society for Simulation Surgery
• /
• 제2권2호
• /
• pp.90-93
• /
• 2015

The fibula free flap has now become the most reliable and frequently used option for mandible reconstruction. Recently, three dimensional images and printing technologies are applied to mandibular reconstruction. We introduce our recent experience of mandibular reconstruction using three dimensionally planned fibula free flap in a patient with gunshot injury. The defect was virtually reconstructed with three-dimensional image. Because bone fragments are dislocated from original position, relocation was necessary. Fragments are virtually relocated to original position using mirror image of unaffected right side of the mandible. A medical rapid prototyping (MRP) model and cutting guide was made with 3D printer. Titanium reconstruction plate was adapted to the MRP model manually. 7 cm-sized fibula bone flap was designed on left lower leg. After dissection, proximal and distal margin of fibula flap was osteotomized by using three dimensional cutting guide. Segmentation was also done as planned. The fibula bone flap was attached to the inner side of the prebent reconstruction plate and fixed with screws. Postoperative evaluation was done by comparison between preoperative planning and surgical outcome. Although dislocated condyle is still not in ideal position, we can see that reconstruction was done as planned.

• 대한설비공학회지:설비저널
• /
• 제6권1호
• /
• pp.1-8
• /
• 1977

This paper describes an experimental investigation which has been carried out with distilled water with the range of heat flux and pressure covering 7,400-28,000kcal/$m^2/h$ and 0.42-1.0332kg/$cm^{2}abs$, respectively. In this experiment, Nickel coated mirror surface heater of 5 cm O.D. was used as a heating source. The conclusions summerized as follows;1. The useful correlation of the test data for the heat transfer coefficient is presented as a function of the pressure. $$a/a_{s}=c{\times}p\;0.18$$ where a is the heat transfer coefficient and $a_s$ is the heat transfer coefficient at atmospheric pressure and p is the pressure, C is constant. 2. The bubble diameter near the heating surface and rising velocity increased with the heat flux. 3. A decrease in pressure results in the decrease of the number of nucleation sites and the increase of the bubble volume. 4. Bubble rising velocity differences are incrased maximumly up to $200\%$ of that at atmopheric pressure.

• Journal of International Society for Simulation Surgery
• /
• 제1권2호
• /
• pp.99-102
• /
• 2014

The skull defect can be made after the trauma, oncologic problems or neurosurgery. The skull reconstruction has been the challenging issue in craniofacial fields for a long time. So far the skull reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for skull reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile various types of allogenic and alloplastic materials have been also used. However, skull reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original skull anatomy as possible using the 3D printed titanium implant, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we fabricated Titanium implant to reconstruct three-dimensional orbital structure in advance, using the 3D printer. This prefabricated Titanium-implant was then inserted onto the defected skull and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be very successful in this patient. Individualized approach for each patient could be an ideal way to manage the traumatic patients in near future.

• 천문학회보
• /
• 제36권2호
• /
• pp.155.1-155.1
• /
• 2011

The Korea Astronomy and Space Science Institute (KASI) and the Department of Astronomy at the University of Texas at Austin (UT) are developing a near infrared wide-band high resolution spectrograph, IGRINS (Immersion Grating Infrared Spectrograph). The white-pupil design of the instrument optics uses 7 cryogenic mirrors including 3 aspherical off-axis collimators and 4 flat fold mirrors. Two of the 3 collimators are H- and K-band pupil transfer mirrors and they are designed as compensators for the system alignment in each channel. Therefore, their mount design will be one of the most sensitive parts in the IGRINS optomechanical system. The other flat fold mirrors are designed within the limited area. Each of those includes the features of 3 axial hard points and 2 radial hard points with one spring plunger in order for the proper deflection of the mirror. The design work will include the computer-aided 3D modeling and finite element analysis (FEA) to optimize the structural stability and the thermal behavior of the mount models. The mount body will also include a tip-tilt and translation adjustment mechanism to be used as the alignment compensators.

• 조명전기설비학회논문지
• /
• 제17권3호
• /
• pp.25-31
• /
• 2003

본 논문에서는 레이저 디스플레이, 레이저 가공, 마킹 장비등에 사용되는 갈바노미터의 제어 시스템을 설계하였다. 갈바노미터 및 거울을 DC모터가 연결된 기본적인 2차 시스템으로 모델링하였으며, 이것의 시간 영역 분석 및 주파수 영역 분석에 기초하여 기본적인 PID제어기를 설계하였다. 기존 시스템은 폰트를 이용한 모션 발생을 위해 하나의 PC가 더 필요한데, 본 연구에서는 이 역할도 DSP가 담당하기 때문에 매우 큰 비용 절감의 효과가 있다. 갈바노미터의 정밀 위치 측정 및 구동을 위하여 16비트A/D, B/A변환기를 사용하였다. 실험 결과 제안된 제어 시스템이 실제 환경에서도 매우 잘 동작함을 확인하였다. 통신은 USB를 사용하였고, 따라서, 본 논문에서 제안된 제어 시스템은 사용자의 PC에 쉽게 연결될 수 있다는 장점도 가지고 있다.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.263-267
• /
• 2006

A new thermal bimorph actuator for large out-of-plane displacement is designed, fabricated and tested. The deflecting beam is composed of polyimide, heater, and polyvinyl difluorides with tetrafluoroethylene (PVDF-TrFE). The large difference of coefficient of thermal expansion (CTE) of two polymer layers (polyimide and PVDF-TrFE) can generate a significant deflection with relatively small temperature rise. Compared to the most conventional micro actuators based on MEMS (micro-electro mechanical system) technology, a large displacement, over 1 mm at 20 mW, could be achieved. Additionally, we can achieve response time of 14.6 ms, resonance frequency of 12 Hz, and reliability ability of $10^5$ cycles. The proposed actuator can find applications where a large vertical displacement is needed while maintaining compact overall device size, such as a micro zooming lens, micro mirror, micro valve and optical application.