• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.894-898
• /
• 2007

Now a day, lots of the animations include TV series Animations are made by the technique of 3D Animation. However, 3D Animation obstructs visual elements and deteriorates an acquaintance with the limit of unfamiliar material methods and dispersion of light. For this reason, a large of number of 3D Animations are repacked with the style of 2D Animation. Most of previous studies for the conversion of output 3D Animation to the style of 2D Animation are analysis for 2D rendering techniques. In case of Non-realistic 3D Character Animation, first and foremost it needs investigation of the basic producing method for the 2D Animation is different with the realistic expression way of the one for the 3D animation. For a case study, expression methods for the non-realistic and the non-actuality 2D Character Animation come with impossible ways in the real life. This study for the 3D Animation with the style of 2D Animation is to investigate on the keynote for effective expression methods, when we turn 3D Animation into the style of 2D Animation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.147-150
• /
• 2008

We have developed a 3.1-inch diagonal 2D/3D LCD with a novel pixel arrangement, called HDDP (Horizontally Double-Density Pixels), for high-quality 3D images. We have improved 3D visibility by broadening the 3D viewing zone where high-quality images can be seen, and we propose optical characterization methods which can evaluate the high-visibility autostereoscopic displays correctly.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.1-12
• /
• 2003

The purpose of this study was to design the method of 3D space calibration to reduce RMSE by statistical analysis when using the DLT algorithm and control frame. Control frame for 3D space calibration was consist of $1{\times}3{\times}2m$ and 162 contort points adhere to it. For calculate of 3D coordination used two methods about 2D coordination on image frame, 2D coordinate on each image frame and mean coordination. The methods of statistical analysis used one-way ANOVA and T-test. Significant level was ${\alpha}=.05$. The compose of methods for reduce RMSE were as follow. 1. Use the control frame composed of 24-44 control points arranged equally. 2. When photographing, locate control frame to center of image plane(image frame) o. use the lens of a few distortion. 3. When calculate of 3D coordination, use mean of 2D coordinate obtainable from all image frames.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.313-321
• /
• 1998

This study was conducted to investigate the effects of equilibration and dilution methods on the survival rate of vitrified IVM-IVF bovine blastocysts. Vitrification solution was composed with 20% glycerol, 20% ethylene glycol, 3/8 M sucrose and 3/8 M dextrose in D-PBS supplemented with 20% FBS (GESD). Embryos were equilibrated in 1 of 3 methods: 3-step (El), 2-step (E2), or 1-step (E3), and after loading into 0.25-ml straws, were plunged into liquid nitrogen. After warming in water bath at 2$0^{\circ}C$, cryoprotectants were diluted in 1 of 3 methods: 1) D1(VS+1/2 M sucrose, 1/2 M sucrose and l/4 M sucrose), 2) D2 (1/2 M sucrose and 1/4 M sucrose), or 3) D3(1/2 M sucrose only). All procedures except warming were conducted at room temperature. Survival and hatching rates of blastocysts and expanded blastocysts following equilibration methods were 50 and 83.6%, and 27.8 and 67.3%, respectively in El, which were significantly higher (P〈0.01) than those of E2 (16.7 and 23.2%, and 7.4 and 12.5%, respectively) and 23 (0 and 3.7%, and 0 and 0%, respectively). Survival and hatching rates of expanded blastocysts were significantly (P〈0.01) higher than those of blastocysts in El. Survival rates of blastocysts and expanded blastocysts following dilution methods were 52% and 80.6% in D2, which were significantly higher (P〈0.05) than those of D1 (29.6 and 48.3%) and D3 (47.2 and 63.8%). Hatching rates of blastocysts were similar in D1, D2 and D3, however in expanded blastocysts, that of D2(61.3%) was significantly higher (P〈0.01) than that of D1(34.5%). Survival rates of expanded blastocysts in D1 and D2, and hatching rates in D2 and D3 were significantly higher(P〈0.01) than those of blastocysts. These results indicate that the viability of vitrified blastocysts was improved by the several steps of equilibration, and by 2-steps dilution after warming, independently of their stage of development. The results also indicated that the expanded blastocysts are more profitable to vitrification than blastocysts.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.177-186
• /
• 2010

In 3D ultrasound color Doppler imaging (CDI), 8-16 pulse transmissions (ensembles) per each scanline are used for effective clutter rejection and flow estimation, but it yields a low volume acquisition rate. In this paper, we have evaluated three flow estimation methods: autoregression (AR), eigendecomposition (ED), and autocorrelation combined with adaptive clutter rejection (AC-ACR) for a small ensemble size (E=4). The performance of AR, ED and AC-ACR methods was compared using 2D and 3D in vivo data acquired under different clutter conditions (common carotid artery, kidney and liver). To evaluate the effectiveness of three methods, receiver operating characteristic (ROC) curves were generated. For 2D kidney in vivo data, the AC-ACR method outperforms the AR and ED methods in terms of the area under the ROC curve (AUC) (0.852 vs. 0.793 and 0.813, respectively). Similarly, the AC-ACR method shows higher AUC values for 2D liver in vivo data compared to the AR and ED methods (0.855 vs. 0.807 and 0.823, respectively). For the common carotid artery data, the AR provides higher AUC values, but it suffers from biased estimates. For 3D in vivo data acquired from a kidney transplant patient, the AC-ACR with E=4 provides an AUC value of 0.799. These in vivo experiment results indicate that the AC-ACR method can provide more robust flow estimates compared to the AR and ED methods with a small ensemble size.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.674-675
• /
• 2015

A 3D indoor model becomes an indiscernible component of BIM (Building Information Modeling) and GIS (Geographic Information System). However, a huge amount of time and human resources are inevitable for collecting spatial measurements and creating such a 3D indoor model. Also, a varied forms of 3D indoor models exist depending on their purpose of use. Thus, in this study, three different 3D indoor models are defined as 1) omnidirectional images, 2) a 3D realistic model, and 3) 3D indoor as-built model. A series of reconstruction methods is then introduced to construct each type of 3D indoor models: they are an omnidirectional image acquisition method, a hybrid surveying method, and a terrestrial LiDAR-based method. The reconstruction methods are applied to a large and complex atrium, and their 3D modeling results are compared and analyzed.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.19-29
• /
• 2022

The 2D/1D method has become the mainstream of the direct transport calculation considering the balance of accuracy and efficiency. However, the 2D/1D method still suffers from stability issues. Recently, a quasi-3D method has been proposed with axial Legendre expansion. Analysis and comparison of the 2D/1D and quasi-3D method is conducted in theory from the equation derivation. Besides, the C5G7 benchmark, the KUCA benchmark and the macro BEAVRS benchmark are calculated to verify the theory comparisons of these two methods with the direct transport code SHARK. All results show that the quasi-3D method has better stability and accuracy than the 2D/1D method with worse efficiency and memory cost. It provides a new option for direct transport calculation with the quasi-3D method.

• International Journal of Advanced Culture Technology
• /
• v.11 no.4
• /
• pp.346-351
• /
• 2023

With the rapid development of Artificial Intelligence (AI) technology, there is an increasing variety of methods for creating 3D models. These include innovations such as text-only generation, 2D images to 3D models, and combining images with cue words. Each of these methods has unique advantages, opening up new possibilities in the field of 3D modeling. The purpose of this study is to explore and summarize these methods in-depth, providing researchers and practitioners with a comprehensive perspective to understand the potential value of these methods in practical applications. Through a comprehensive analysis of pure text generation, 2D images to 3D models, and images with cue words, we will reveal the advantages and disadvantages of the various methods, as well as their applicability in different scenarios. Ultimately, this study aims to provide a useful reference for the future direction of AI modeling and to promote the innovation and progress of 3D model generation technology.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.9_10 s.146
• /
• pp.1359-1368
• /
• 2005

When we develop the tight-fit 2D pattern from the 3D scan data, segmentation of the 3D scan data into several parts is necessary to make a curved surface into a flat plane. In this study, Garland's method of triangle simplification was adopted to reduce the number of data point without distorting the original shape. The Runge-Kutta method was applied to make triangular patch from the 3D surface in a 2D plane. We also explored the detailed arrangement method of small 2D patches to make a tight-fit pattern for a male body. As results, minimum triangle numbers in the simplification process and efficient arrangement methods of many pieces were suggested for the optimal 2D pattern development. Among four arrangement methods, a block method is faster and easier when dealing with the triangle patches of male's upper body. Anchoring neighboring vertices of blocks to make 2D pattern was observed to be a reasonable arrangement method to get even distribution of stress in a 2D plane.