• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.175-175
• /
• 2010

이전 연구에서는 사파이어 기판 위에 이종에피성장 방법으로 성장한 높은 인듐 조성의 극박 InGaN/GaN 다층 양자우물 구조를 이용한 근 자외선 (near-UV) 영역의 광원에 대하여 보고하였다. 본 연구에서는 HVPE (Hydride Vapor Phase Epitaxy) 법을 이용하여 성장된 free-standing GaN 기판 위에 유기금속 화학증착법 (MOCVD) 을 이용하여 GaN 동종에피박막과 높은 인듐 조성의 InGaN/GaN 다층 양자우물을 성장하였고 그 특성을 분석하였다. Free-standing GaN 기판은 표면 조도가 0.2 nm 인 평탄한 표면을 가지며 $10^7/cm^2$ 이하의 낮은 관통전위밀도를 가진다. Freestanding GaN 기판 위에 성장 온도와 V/III 비율을 조절하여 GaN 동종에피박막을 성장하였다. 또한 100 nm 두께의 동종 GaN 박막을 성장한 후에 활성층으로 이용될 높은 인듐 조성의 InGaN/GaN 다층 양자우물구조를 성장하였다. Free-standing GaN 기판 위에 성장된 GaN 동종에피박막과 다층 양자우물구조의 표면 형상은 주사 탐침 현미경 (scanning probe microscopy, SPM) 을 이용하여 관찰하였고 photoluminescence (PL) 측정과 cathodoluminescence (CL) 측정을 통하여 광학적 특성을 확인하였다. 사파이어 기판 위에 성장된 2 um 의 GaN을 이용하여 성장된 높은 인듐 조성의 InGaN/GaN 다층 양자우물의 결함밀도는 $2.5 \times 10^9/cm^2$ 이지만 동일한 다층 양자우물구조가 free-standing GaN 기판 위에 성장되었을 경우 결함 밀도는 $2.5\;{\times}\;10^8/cm^2$로 감소하였다. Free-standing GaN 기판의 관통전위 밀도가 $10^7/cm^2$ 이하로 낮기 때문에 free-standing GaN 기판에 성장된 높은 인듐 조성의 다층 양자우물구조의 결함밀도가 GaN/sapphire 에 성장된 다층 양자우물의 결함밀도 보다 감소했음을 알 수 있다. Free-standing GaN 기판에 성장된 다층 양자 우물은 성장온도에 따라 380 nm 에서 420 nm 영역의 발광을 보이며 PL 강도도 GaN/sapphire 에 성장한 다층 양자우물의 PL 강도 보다 높은 것을 확인할 수 있다. 이것은 free-standing GaN 기판에 성장된 높은 인듐 조성의 InGaN/GaN 다층 양자우물구조의 낮은 결함밀도로 인하여 활성층의 발광 효율이 개선된 것임을 보여준다.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.81-89
• /
• 1994

Ti film of lOnm thickness and Co film of 18nm thickness were sequentially e-heam evaporated onto Si (100) substrates. Metal deposited samples were rapidly thermal-annt.aled(KTA) in thr N1 en vironment a t $900^{\circ}C$ for 20 sec. to induce the reversal of metal bilayer, so that $CoSi_{2}$ thin films could be formed. The sheet resistance measured by the 4-point probe was 3.9 $\Omega /\square$This valur was maintained with increase in annealing time upto 150 seconds, showing high thermal stab~lity. Thc XRII spectra idrn tified the silicide film formed on the Si substrate as a $CoSi_{2}$ epitaxial layer. The SKM microgr;iphs showed smooth surface, and the cross-sectional TKM pictures revealed that the layer formed on the Si substrate were composed of two Co-Ti-Si alloy layers and 70nm thick $CoSi_{2}$ epl-layer. The AES analysis indicated that the native oxide on Si subs~rate was removed by TI ar the beginning of the RTA, and Ihcn that Co diffused to clean surface of Si substrate so that epitaxial $CoSi_{2}$ film could bt, formed. In thc rasp of KTA at $700^{\circ}C$. 20sec. followed by $900^{\circ}C$, 20sec., the thin film showed lower sheet resistance, but rough surface and interface owing to $CoSi_{2}$ crystal growth. The application scheme of this $CoSi_{2}$ epilayer to VLSI devices and the thermodynarnic/kinetic mechan~sms of the $CoSi_{2}$ epi-layer formation through the reversal of Co/Ti bdayer were discussed.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.162-177
• /
• 2020

Research was conducted to characterize the copper production and smelting process with 11 copper smelting by-products (copper slag and copper crucible) excavated from the NA and LA areas at the Gwanbuk-ri archeological site in Buyeo. Scanning electron microscopy-energy dispersive spectroscopy, wavelength dispersive X-ray fluorescence, X-ray diffraction, and Raman microspectroscopy were employed in the analysis. The research results reveal that the copper slag from Gwanbuk-ri contained silicate oxide, magnetite, fayalite, and delafossite, which are typical characteristics of crucible slag and refined slag. The outward appearance and microstructure of the slag were grouped as follows: 1. glassy matrix + Cu prill, 2. glassy matrix + Cu prill + magnetite, 3. silicate mineral matrix + Cu prill, 4. crystalline (delafossite and magnetite) + amorphous (Cu prill), 5. magnetite + fayalite, and 6. slag from slag. The copper slags from Guanbuk-ri were found to contain residues of impurities such as SiO₂, Al₂O₃, CaO, SO₄, P₂O₅, Ag₂O, and Sb₂O₃ in their microstructure, and, in some cases, it was confirmed that copper, tin and lead are alloys. These results indicate that refining of intermediate copper(including impurities) and refining of alloys of copper(including impurities) - tin and refining of copper(including impurities) - tin - lead took place during the copper production process at Gwanbuk-ri, Buyeo.

• Journal of Periodontal and Implant Science
• /
• v.34 no.3
• /
• pp.671-681
• /
• 2004

Genomic Project 이후로 다양한 질환에 있어서 유전적인 영향에 관한 연구가 진행되고 있다. 이 연구의 목적은 한국인 치주질환 환자에서 Fc ${\gamma}R$ 유전자의 유전자다형성과 치주질환 특성과의 관련성을 알아보는 것이다. 치주적으로 건강한 한국인 90명(대조군, 남자64명, 여자26명), 중도 만성 치주염환자 40명(severe chronic periodontitis patients; severe CP, 남자 24명, 여자 16명)을 대상으로 임상지수(치주낭 깊이, 입상부착소실, 치은지수, 치태지수, 탐침 후 출혈지수, 치조골소실)를 측정하였다. 또한 이들의 정맥혈에서 추출한 DNA를 PCR(Polymerase Chain Reaction)법, 전기영동법 등을 이용하여 Fc ${\gamma}RIIIa$ , Fc ${\gamma}RIIIb$의 대립유전자의 존재여부를 확인하였다. 이를 바탕으로 각 유전자의 다형성 및 Fc ${\gamma}R$ 복합유전자형 (Fc ${\gamma}R$ composite genotype)을 확인하여, 각 군 간을 비교하였다. 치주질환의 특성과 유전자 다형성과의 관련성을 알아보기 위하여 Fc ${\gamma}R$ 유전자에 대한 유전자다형성을 조사한 결과 다음과 같은 결과를 얻을 수 있었다. 1. Fc ${\gamma}RIIla$에 대한 유전자다형성 연구결과 대조군과 severe CP, AgP군 사이에서, severe CP와 AgP군 사이에서는 대립유전자분포가 서로 유의성 있는 차이를 나타내었지만(p<0.05), Fc ${\gamma}RIIlb$에서는 유의성 있는 차이를 보이지 않았다(p>0.05). 2. Fc ${\gamma}R$ 복합유전자형간의 비교에서 유의성 있는 차이를 발견할 수 없었다(p>0.05). 이와 같은 결과를 종합하여 볼 때 실험대상 한국인 치주염환자에서 Fc ${\gamma}R$ 유전자에 대한 다형성분석에서 Fc ${\gamma}RIIIa$ 대립유전자가 치주염에 대한 감수성과 관련되어 있다고 생각된다. 이 연구의 결과는 유전자의 차이가 치주질환의 감수성 판단의 자료로 활용할 수 있는 가능성을 보여주고 있다.

• Nuclear Engineering and Technology
• /
• v.18 no.1
• /
• pp.1-8
• /
• 1986

A magnetic quadrupole doublet was fabricated for use at the pre-target position of SNU 1.5MV Van de Graaff accelerator and then its optical characteristics were measured and analysed. The physical dimensions are: pole length 180mm, aperture radius 25mm, pole tip radius 28.75mm. Material for poles and return yokes is carbon steel KS-SM40C. Coils have 480 turns per one pole and air-cooling is adopted. Applying the d.c. current 2.99$\pm$0.03A to the lens, and using the Hall probe, magnetic field elements $B_{\theta}$ , $B_{\gamma}$, were measured at the selected Points along each coordinate direction r,$\theta$, z. From the area integration and orthogonal polynomial fitting for the measured data, the magnetic Field gradient G=566.3$\pm$2.1 gauss/cm at lens center, the effective length L=208.3$\pm$1.44mm along the lens axis have been obtained. The harmonic contents were determined up to 20-pole from the generalized least squares fitting. The results indicate that sextupole/quadrupole is below 1.4$\pm$0.9% and all the other multipoles are below 0.5% in the region within 18mm radius at the center of lens.

• Journal of Mushroom
• /
• v.3 no.2
• /
• pp.52-59
• /
• 2005

The Aphyllophorales is a large order containing about 2,000 known species. Many of these are the bracket and coral fungi. The vast majority of these fungi are saprophytic on the plant debris. Many species are significant in decomposing plant remains, as they are able to digest cellulose or lignin that occurs in plant cell walls. Many of these fungi have been involved in everyday human affairs. A few were used medicinally by the Greeks and Romans as a remedy for many complaints, including colic, fractured limbs and bruises. Other bracket fungi have been used as curry combs for horses, as snuff, as razor strops and as a source of dye for clothing. The texture of the basidiocarp may be similar to that of cork, wood, leather, paper, or cartilage. Unlike the basidiocarps of the Order Agaricales, the basidiocarps of the Aphyllophorales are not fleshly and moist. Division of the members of the Aphyllophorales into genera was originally made on the basis of gross morphology of the basidiocarp and hymenium and Donk(1964) recognizes 22 families in this order. The species and genus whose typical in Aphylloporales were listed in Table. with related information. The ITS region sequence of some genus were found by BLAST search. Sequences retrieved from GenBank were visually aligned by the program CLUSTAL G. As a result, the medicinal mushroom was separated in four groups. In this multiple alignment, the sequence analysis among Fomes group, Inonotus group and Phellinus group showed high genetic similarity except Hericium group and Sparassis group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.228-237
• /
• 2001

It is well known that glass-ionomer cement and compomer can release fluoride which can inhibit the progression of dental caries. The purposes of this study were to evaluate whether the fluoride from fluoride-containing filling materials can penetrate the dentin bonding adhesive and the dentin bonding adhesive can increase the bond strength of resin-modified glass ionomer. The amount of fluoride release from resin-modified glass ionomer and compomer was measured during 28 days of period and statistically analyzed by t-test. The bond strength of each material with/without dentin bonding adhesive was measured and also statistically analyzed by t-test. The distribution of fluoride from each material into the tooth was explored by electron probe microanalysis system(EPMA). The experimental teeth used were second primary molars about to exfoliate. The amount of fluoride release from each material was diminished by dentin bonding adhesive during 28 days(p<0.05) and the bond strength was not increased by dentin adhesive in resin-modified glass ionomer. The bond strength of group VI was not detectable. The distribution of fluoride from each material into teeth was according to dentino-enamel junction and dispersed into pulp from pulpal floor. The widest distribution was shown in resin-modified glass ionomer cement filled without the application of dentin bonding adhesive.

• Journal of Sensor Science and Technology
• /
• v.6 no.5
• /
• pp.400-406
• /
• 1997

The electrical and physical characteristics of aluminum oxide and Pt thin films on it, deposited by reactive sputtering and DC magnetron sputtering, respectively, were analyzed with increasing annealing temperature($400{\sim}800^{\circ}C$) by four point probe, SEM and XRD. Under $600^{\circ}C$ of annealing temperature, aluminum oxide had the properties of improving Pt adhesion to $SiO_{2}$ and insulation without chemical reaction to Pt thin films and the resistivity of Pt thin films was improved. But these properties of aluminum oxide and Pt thin films on it were degraded over $700^{\circ}C$ of annealing temperature because aluminum oxide was changed into metal aluminum and then reacted to Pt thin films deposited on it. The thermal characteristics of Pt micro heater were analyzed with Pt-RTD integrated on the same substrate. In the analysis of properties of Pt micro heater, active area was smaller size, Pt micro heater had better thermal characteristics. The temperature of Pt micro heater with active area, $200{\mu}m{\times}200{\mu}m$ was up to $400^{\circ}C$ with 1.5watts of the heating power.

• Composites Research
• /
• v.19 no.5
• /
• pp.7-11
• /
• 2006

The improved SWNTs/PANi composite actuator films applicable to an artificial muscle were fabricated successfully using a new process of manufacture that consists of 90% pure single-walled carbon nanotubes (SWNT) and chemical polymerization. PANi is electrically conducting polyaniline polymer. The conductivities of the composite SWNTs/PANi film-type actuators and the pure PANi films fabricated were measured as 56.15 S/cm and 17.38 S/cm, respectively, by the 4-prove method. The conductivity of the composite actuator is 3.2 times higher than the pure PANi film. The fabricated composite actuator showed higher conductivity than any other similar ones. The quality of samples was investigated by an electron scanning microscope (SEM). To measure the actuating strains, a specially designed beam balance apparatus was developed and strains of the composite actuators was measured by a laser displacement sensor subjected to electric currents. During the operation, the sample was soaked in the $NaNO_3$ solution and the sine-wave voltage in the range of $+1V{\sim}-1V$ was applied. The length of the composite actuator changed from $l_0=12.690$ mm to $l_1=12.733$ so that the change of length was l=0.043 mm and the strain was 0.34 %. This is a very high strain for this kind of a composite actuator. Other result reported by Tahhan showed 0.23 % strain, so that the present result is improved by 48%.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.591-596
• /
• 2006

Topology and molecular ordering of NPD(4,4'-bis-[N-(1-naphthyl)-N-phenyl-amino]biphenyl) thin films deposited under magnetic field with post-deposition annealing were investigated. NPD was deposited onto ITO glass substrates via thermal evaporation process in vacuum. It is of great importance for highly oriented organic/metal films to have improved device performances such as higher current density and luminance efficiency. AFM (Atomic Force Microscope) and XRD (X-Ray Diffraction) analyses were used to characterize the topology and structure of oriented NPD films. The multi-source meter was used to observe the current-voltage characteristics of the ITO (Indium-Tin Oxide) / NPD (4,4'bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl) / Al (Aluminum) device. While NPD thin films deposited under magnetic field were not molecularly well aligned according to the XRD results, the films after post-deposition annealing at $130^{\circ}C$ were well-oriented. AFM images show that NPD thin films deposited under magnetic field had a smoother surface than those deposited without magnetic field. The current-voltage performance of NPD thin films was improved due to the enhanced electron mobility in the well-aligned NPD films.