• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.1
• /
• pp.43-55
• /
• 2009

Advanced countries in aerospace have been struggle to realize the hypersonic air-breathing system since originating the concept of the hypersonic air-breathing propulsion system during the first half of the twentieth century. At last, NASA's X-43A Hyper-X did successful Mach 10 flight in November 2004. Each countries are running the program to applicate this hypersonic air-breathing propulsion system to SSTO(Single Stage to Orbit) or TSTO(Two Stage to Orbit) vehicle or hypersonic missile system at present. In this paper, we wrote the history and current issues of the hypersonic air-breathing propulsion system and hypersonic flight with the hypersonic air-breathing propulsion system.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.35-44
• /
• 2007

In this study was made the flutter analysis for the export model of Firefly(Bandi-ho), the small canard aircraft. Stiffness model based on internal load generation finite element model was generated. Mass model based on the weight DB for weight control was generated. Aerodynamic model based on Doublet Lattice Method was generated. Preliminary flutter analysis was made. Based on it, major vibration modes are identified and experimentally obtained via the ground vibration test. The obtained normal mode frequencies were used to correlate the finite element model. Flutter analysis was made again and major flutter mechanisms were summarized. The most important flutter root was identified as a coupled root between rigid body roll mode and anti-symmetric wing pitching mode.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.34-34
• /
• 1998

차세대 비행체가 갖추어야 할 요건으로 다양한 작동 범위에서 다목적으로 사용될 수 있어야 한다는 점이다. 비행체는 작전시 초음속으로 순항해야 하며, 폭탄으로 손상된 비행장에서도 이륙하여 작동할 수 있도록 짧은 이륙과 착륙 거리를 가져야 하기 때문에 현재 비행체보다 더 큰 받음각에서 작동하여 비행시 뛰어난 기동성을 가져야 한다. 제어력을 향상시키기 위해서 받음각과 동압에 의존하지 않고 큰 제어 모멘트를 제공하는 차세대 방법은 엔진의 배기가스를 원하는 비행 방향으로 제어하는 것으로 이러한 방법을 추력 편향 제어(Thrust Vector Control)라고 한다. 기존 공력에 의한 비행 자세제어 방법은 속도의 2승에 비례하는 제어력을 발생하지만, 실속을 피해야하기 때문에 공기력을 이용한 날개 및 비행체의 받음각에 한계가 있어 비행체의 선회능력을 제한하며 고공에서 저속비행 하는 경우에는 공기의 밀도가 낮고 동압이 작게 작용하여 선회능력은 낮아진다. 그러나, 추력 편향 장치는 공력을 이용하지 않고 추력을 이용하기 때문에 실속에 의한 제한이 없어 큰 받음각(70$^{\circ}$-90$^{\circ}$)으로 선회할 수 있어 월등한 기동성을 발휘할 수 있다. 이러한 추력 편향 장치 중 제트 베인형은 소형화가 가능하고, 하나의 노즐로 수직, 수형 및 횡 방향의 3축 제어를 할 수 있어 많이 사용되고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.99-102
• /
• 2009

LES(Large eddy simulation) of breakup and atomization of a liquid jet into cross turbulent flow was performed. Two phase flow between a gas phase and a liquid phase was modeled by a mixed numerical scheme of both Eulerian and Lagrangian methods for gas and liquid phases respectively. The first and second breakup of liquid column was observed. The penetration depth in cross flow was comparable with experimental data for several variant of a liquid-gas momentum flux ratio by varying liquid injection velocities. SMD(Sauter Mean Diameter) distribution downstream of jet was analyzed.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.231-232
• /
• 2001

도시지역의 주 오염물질 중 하나인 입자상 물질(Particulate Matter:PM)은 공기역학적 직경 2.5$\mu\textrm{m}$을 기준으로 이산형 분포를 하여 2.5$\mu\textrm{m}$이하를 미세입자, 2.5$\mu\textrm{m}$이상을 조대입자로 나뉜다. 이 미세입자는 주로 자동차 배출, 산업연소에서 배출되는 가스상 물질의 2차 반응으로 발생한다(Pope et al., 1995). 미세입자는 상당량이 2차 반응에서 생성되는 물질이며, 크기가 작은 대신 상대적으로 표면적이 크기 때문에 각종 중금속과 유해 대기오염물질과의 흡착이 용이하여 호흡기 계통의 질병을 일으킬 수 있는 확률이 조대입자에 비해 높다고 알려져 있어 인체에 미치는 영향이 클 것으로 시사되고 있다(Dockery et al., 1998). (중략)

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.592-604
• /
• 1999

The steady state and dynamic characteristics of large cell area MCFC stacks were analyzed to solve the problems such as temperature difference generated in stacks and pressure difference between anode and cathode. Manipulated variables (current density, duel utilization rate, oxidant utilization rate) and controlled variables (temperature difference, anode and cathode pressure difference) which had an important effect on the MCFC stack performance were determined using operation results of two types of MCFC stacks (5kW (3,000 $\textrm{cm}^2$, 20 ea). 3kW (6,000 $\textrm{cm}^2$, 5ea)). The stability and transfer function representing system dynamics were obtained by steady state gain rate which showed the relative change between MVs and CVs. The transfer function was a 3$\times$3 matrix and a typical first order system without time delay. The optimal operating condition of large cell area MCFC stacks could be determined by analyzing dynamic characteristics. In case of a 5 kW MCFC stack, pressurized operation with recycle flow should be used to control the outlet temperature less than 68$0^{\circ}C$ and to control the MCFC system effectively. MIMO control or decoupler should be used to remove the interaction between MVs and CVs. This result will be used as important data in determining the control structure design and operation mode of large cell area MCFC systems in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.433-439
• /
• 2020

This study compared and analyzed the change of air consumption according to water depth with human characteristics and theoretical values. The experimental results are as follows. First, subjects A and B showed similar rise rates depending on the water depth. Second, subject C had a significantly higher rate of increase in air consumption at 25m underwater because the body responded sensitively to deep water pressure, which increased air consumption because breathing was faster than other participants. Third, the subjects D and E showed significantly lower overall air consumption. D and E were 37 and 35 years of age, respectively, the youngest, strongest and most experienced in deep sea diving at the time of military service. Fourth, the average air consumption per minute of the test subjects increased from 5m in water to 1.45 times, 10m in water to 1.85 times, and 20m in water to 2.8 times. This seems to be a result of different experiences, physical fitness, the degree of adaptation of the body to underwater, and different breathing techniques. Lastly, the difference between the experimental average value and the theoretical value appears to be the result of using more or less air than the theoretical value depending on the experiences and physical strength of each of the 5 rescuers, the degree of adaptation of the body underwater, and the method of underwater breathing.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.135-142
• /
• 2010

The composting of layer manure is economical and efficiently process. In this study, the variation of composting characteristics in layer manure was investigated according to air supply capacity. The fermented compost was added in layer manure and mixed with sawdust inside composting reactors. The level of air supply capacity was varied in the range of $50{\sim}200\;{\ell}/m^3/min$. During composting the temperature variations of composting piles was different the temperatures of composting piles for T-1 ($50\;{\ell}/m^3/min$) and T-2 ($100\;{\ell}/m^3/min$) were reached at $40^{\circ}C$ and $50^{\circ}C$ within 2 days, respectively. For T-3 ($150\;{\ell}/m^3/min$) and T-4 ($200\;{\ell}/m^3/min$), their temperatures was $60^{\circ}C$ within same days and maintained during 8 days. Water contents decreased according to the air supply capacity; 8.9%, 15.4%, 18.0% and 18.6% for T-1, T-2, T-3 and T-4. The weight ratios of T-1, T-2, T-3 and T-4 were reduced to 12.8%, 15.6%, 18.1% and 17.9%, respectively. The decreasing volumetric ratios of T-1, T-2, T-3 and T-4 were 18.0%, 21.0%, 22.3% and 22.0%. The oxygen discharge concentrations during composting were 12 ppm for T-1, T-2 and 9 ppm for T-3 and T-4. After composting, fertilizer components such as total nitrogen (TN) and phosphorous pentoxide ($P_2O_5$) were examined at each air supply capacity. Nitrogen contents of the T-1, T-2, T-3 and T-4 were 0.75%, 0.74%, 0.72% and 0.64%. Also, The contents of $P_2O_5$ were 0.35%, 0.40%, 0.38% and 0.42% for T-1, T-2, T-3 and T-4.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.327-332
• /
• 2011

As the preceding research for the design of gangway in the next generation high speed train, the aero-acoustic noise at the gangway is calculated. For this purpose, the shape of gangway with mud flaps is assumed as the two-dimensional cavity. Then, 5 gap sizes between mud flaps of gangway are selected and parametric study is performed according to the gap sizes. From this study, the aerodynamic features such as vortex shedding, pressure, etc. are computed. Also, the aero-acoustic properties of tonal noise and overall noise are analyzed at the 3 locations of microphone and the relation between the gap size of mud flap and the noise level is assessed. Through this study, it is shown that the noise characteristics of base and specific models are better than those of other models.

• Culinary science and hospitality research
• /
• v.16 no.4
• /
• pp.220-229
• /
• 2010

Brewing tea with regular teapots can cause a problem in keeping the temperature of the tea. Cold weather, a cold teapot, and/or the temperature of tea leaves make tea cold, lowering the temperature of the tea leaves that can also make the flavor of the tea leaves worse. This experiment shows both the problem and the solution to the temperature problem of tea leaves. To maintain the appropriate temperature and reduce the problem, we researched and developed a special straw for tea leaves as a result of this experiment The straw consists of various filtering holes(diameter 1~2 mm) with the height of 5 mm from the very bottom of the straw. Using the straw is better to keep higher temperature, better flavor, and the smell of tea. Also, the sensory evaluation shows that the overall taste of tea is improved(p<0.05).