• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.57-63
• /
• 2001

The wound rotor type induction motor(WRIM) control system which is widely used in the industry has many maintenance problem because of external resistors and magnetic contactors. In this paper, the simple sensorless vector control algorithm for WRIM is proposed without any additional devices except detecting rotor currents. Because the external resistors are disconnectd and the rotor slip rings are shorten, the power loss due to external resistors is removed and the maintenance problem is improved remarkably. Also, the vector control performance becomes better because the proposed sensorless vector control algorithm does not use the rotor resistance which is usually used to estimate the slip frequency in case of indirect vector control scheme. The proposed algorithm is verified by the digital simulation and the experiment.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.316-321
• /
• 2013

This study was carried out to analyze heat transfer characteristics and heat flow through air-inflated double layer PO film with thermal resistance method. The experiments was conducted in the laboratory controlled air temperature between 258.0 K and 278.0 K. The experimental materials were made up two layers PO film and an inflated-air layer. The thickness of air-inflated layer was fixed at 3 types of 110, 175, 225 mm. The electrical circuit analogy for heat transfer by conduction, radiation and convection was introduced. Experimental data shows that the dominant thermal resistance in heat transfer through the air-inflated double layer film was convection. Calculation errors were 1.1~18.5 W for heat flow. In result, the method of thermal resistance could be introduced for analysis of heat flow characteristics through air-inflated double layer film.

• Journal of Sensor Science and Technology
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2000

In order to measure the thickness of the slag layer on the molten metal in the melting vessels for steel making foundaries, we manufactured the slag-thickness measuring system consisting of the probe and its driving system, which is based on the principle of detecting the change in the electrical resistivity. Experimental results show that there is a very wide difference of the electrical resistivity by the order of about $10^3$ between the molten metal and the hot slag and, hence, the air/slag and slag/molten metal interface can be exactly detected with the use of the probe which can be moved toward the melt. Therefore, it can be concluded that the proposed scheme of the slag measurement system in this study is Proven to be excellent in its efficiency and accuracy.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.61-61
• /
• 2017

노지 고추 수확작업은 100% 인력에 의존하고 있으며 7~9월에 걸쳐 5~6회의 다수의 작업이 수행되어 노동 강도가 크다. 또한 농촌의 고령화와 노동력 감소로 인하여 수확인력의 부족이 발생하고 있음에도 불구하고 시중에 유통되고 있는 고추 및 노지채소 수확작업 편이기기는 동력이 아닌 인력으로 이랑사이를 이동하며 작물을 수확하는 구조로 되어있다. 이는 노동 강도를 줄여주는 효과가 미미하기 때문에 동력이 수반된 편이장치가 필요하며 또한 적절한 모터 및 제어장치가 요구된다. 적절한 모터를 선정함에 있어서 영향을 주는 인자는 주행저항(RR)이며, 구성요소로는 구름마찰저항(Rr), 공기저항(RА), 등판저항(Rg), 가속저항(Ra)이 있으며, 다음과 같은 식으로 정의된다. 주행저항(RR)=구름마찰저항(Rr)+공기저항(RA)+등판저항(Rg)+가속저항(Ra) 구름마찰저항(Rr)=구름마찰저항계수(${\mu}$)${\times}$차량총중량(W) 등판저항(Rg)=차량총중량(W)${\times}Sin{\theta}$ 공기저항(RА), 및 가속저항(Ra)은 1m/s 미만의 속도가 요구되기 때문에 무시할 수 있다. 동력원에서 최종 구동축으로 전달된 동력은 주행장치를 통하여 지면에 전달되고 이 동력에 의해 작업차의 주행장치에 추진력이 발생하며 주행장치의 추진력이 주행저항 이상이 될 때 작업차는 전진하게 된다. 따라서 작업차의 주행속도를 V(m/s), 전동기의 효율을 ${\mu}_m$, 동력전달효율을 ${\mu}_{TD}$라고 하면 다음과 같은 식이 산출된다. 전동기의 소요출력(P)=주행저항(RR)${\times}$속도(V)/전동기의 효율(${\mu}_m$)${\times}$동력전달효율(${\mu}_{TD}$) 구름마찰계수를 0.3이라고 할 때 포장의 경사도와 작업차의 주행속도 변화에 따른 주행소요 동력을 비교하였다. 주행소요동력은 포장의 경사각과 주행속도의 증가와 더불어 증가한다. 고추 및 노지채소 수확작업 편이장치의 작업시 요구되는 주행속도는 일반적으로 0.25m/s, 등반각은 5도이다. 이때 구동 전동기의 출력은 안전율을 고려하여 식에 의해 계산한 결과 1ps으로 산출 되었다. 선정한 구동모터의 감속비는 7.18 : 1, 에너지의 효율은 78 %, 기동토크는14 N/m 이며, 축전지의 경우 구동모터에 기반 하여 구입이 간편하고 상용화 되어있는 연축전지를 사용하여 교체 및 수리가 간단하도록 하였다. 축전지는 12V 18Ah의 축전지 2개를 사용한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.9-15
• /
• 2011

In this study, we investigated the hydrodynamic and thermal performance of constructal architectures on the basis of the mass flow rates for a given pressure drop, and we determined the thermal resistance and flow uniformity. The five flow configuration used in this study were the first construct with optimized hydraulic diameter, the second construct with optimized hydraulic diameter, the first construct with non-optimized hydraulic diameter, second construct with non-optimized hydraulic diameter, and a serpentine configuration. The results of our study suggest that the best fluid-flow structure is the second constructal structure with optimized constructal configurations. We also found that in the case of the optimized structure of cooling plates, the heat transfer was remarkably higher and the pumping power was significantly lower than those of traditional channels.

• Korean journal of applied entomology
• /
• v.19 no.3 s.44
• /
• pp.156-162
• /
• 1980

The inheritance and varietal differences of resistance to bacterial leaf blight caused by Xanthomonas oryzae in rice were studied. Among eighteen cultivars used, 'IR2061-465-1-5-5', 'IR2061-552-6-9', 'IR 1561-228-9-3', ana 'Milyang42, were found to have a high level of resistance to the three isolates of X. oryzae at maximum tillering and flowering stage. Varietal differences in lesion development of the cultivars belonging to the same varietal group were clearly recognized. For the genetic study on bacterial leaf blight resistance, two rice breeding lines 'IR2061-465-1-5-5', 'IR1561-228-3-3' were crossed with susceptible cultivar 'Milyang 23'. The $F_1,F_2,\;and\;F_3$ progenies were evaluated at flowering stage using the bacterial isolate 'JN 7853'(II). Average lesion length of the $F_1$ plants of the crosses showed longer than that of resistant parents, and the frequency distribution of lesion length in the $F_2\;and\;F_3$ populations showed continuous variation.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.207-212
• /
• 1998

Tea field-collected populations of the tea red spider mite (Tetranychus kazawai Kishida) from five different locations in the southern region of Korea were assessed for resistance to seven acaricides using leaf spray method. There were considerable differences in susceptibility depending on the tested acaricides and the location from which the population was collected. The populations showing high resistance ratio of more than 20 with respect to certain acaricide were as follows: the Sungjun and Cheju populations to azocyclotin, tebufenpyrad, fenpyroximate, pyridaben, propargite, and fenpropathrin; the Haenam population to propargite and fenpyroximate; the Bosung population to propargite; the Youngam population to pyridaben. Therefore, the use of other alternative acaricides against the Sungjun and Cheju populations is needed. However, careful selection of the appropriate acaricide against the Haenam, Bosung and Youngam populations of the tea red spider mite might be maintained in effective control.

• Journal of Korean Society of Transportation
• /
• v.20 no.6
• /
• pp.69-80
• /
• 2002

차로변경이 발생하는 두 가지 상황 즉, 강제 차로 변경과 선택적 차로 변경 중, 선택적 차로변경 상황에서 운전자가 수락 가능한 간격을 발견했을 때, 차로별 속도 차가 차로 변경 의사결정에 미치는 영향을 모사할 수 있는 모형식을 추정하였다. 즉, 선택적 차로 변경은 운전자의 차로 변경 여부에 대한 상황판단과 함께 목적 차로의 간격 수락여부에 대한 의사결정으로 이루어지는데, 본 논문에서는 목적 차로에 수락 가능한 간격이 존재할 경우 차로별 속도차가 운전자의 의사결정에 어떤 영향을 미치는지에 대해 분석하였다. 이를 위해, 운전자 의 의사결정에 영향을 미칠 수 있는 다른 요소 즉, 중차량, 기하구조, 및 합·분류의 영향을 최소화하는 지점을 선택하여 표본조사를 실시하였으며, 보다 설명력 있는 모형식을 얻기 위해 상관분석 등을 수행하여 불필요하다고 생각되는 변수는 제외시켰다. 또한, 운전자의 희망속도와 주행 속도 차에 의한 영향을 반영하기 위해 현 차로 속도를 부가적인 변수로 추가하였으며, 계수추정은 통계패키지인 SAS를 이용하였는데, 자료분석에 있어, 속도차 구간에 따라 다른 간격수락 특성을 보여 차로별 속도차를 0∼2.0m/s구간과 2∼11.52m/s구간으로 나누어 분석을 수행하였다. 분석결과 속도차 0∼2.0m/s구간에서는 속도차가 증가할수록 차로 변경률이 높아졌으나, 2∼11.52m/s구간에서는 오히려 차로 변경률이 낮아지는 것으로 나타났는데, 이는 속도 차의 증감에 대해 운전자로 하여금 차로 변경을 유도하는 요소와 함께 저항하게 하는 요소가 있다는 것을 알 수 있었다. 분석결과. 2.0m/s 이상의 속도차에서 차로변경에 대한 저항이 상대적으로 크게 작용한다는 것을 알 수 있었으며, 도로 설계시 이를 반영하여 도로기하구조 및 안전성 등을 향상시킬 수 있을 것으로 보인다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2011

An analytical study on the flow resistance of tree-shaped channel-flow architectures was carried out based on the principle of the constructal law; the evolutionary increase in the access to currents that flow through the channels with improvements in the flow configurations were studied in a square domain using two diameters. Two types of tree-shaped configurations were optimized. The minimized global flow resistance decreased steadily as the system size $N^2$ increased. From the two channel configurations, the one that resulted in better pressure drop was selected. Further, it was shown that the system performance can be enhanced by adopting the second tree-shaped configurations when the system size is greater than $18^2$.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.97-103
• /
• 1999

The dynamic resistance monitoring in primary circuit is one of the important issues. Because in-process and real time quality assurance of resistance spot weld is needed to increase the product reliability. In this study, new dynamic resistance detecting method is proposed as a practical manner of weld quality assurance using instantaneous current and voltage measured at the primary circuit. and also, various patterns of primary dynamic resistance curve are characterized with the macro photograph and the weldability lobe curve. It is found that the primary dynamic resistance patterns are basically similar to those of the secondary, but there is evident advantage such as no extra devices are needed to obtain the quality information and eventually real time feedback control will be possible.