• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.131-138
• /
• 2009

A simulation-optimization model is developed for development of groundwater and control of a saltwater wedge for protecting over-exploiting freshwater pumping wells. To achieve the goal an objective function is developed for three types of wells: freshwater pumping, freshwater injection and saltwater pumping. Integrity of groundwater environment is accounted for by including three indices. Illustrative cross-sectional examples show that both types of barriers can protect freshwater pumping wells from saltwater intrusion. A barrier well operating at the same rate located anywhere within a certain reach can protect a pumping well. However, the location of the reach appears to contradict the common practice of barrier placements. Consideration of the groundwater environment yields a unique optimal location for barrier wells.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.367-367
• /
• 2018

전 세계적으로 이상기후에 의한 영향으로 여름철 장마와 같은 우기가 점차 사라지고 집중호우 및 가뭄이 빈번하게 발생하는 등 지하수위 변동성에 따른 물 부족 현상이 발생하고 있다. 특히, 제주특별자치도는 하천수 및 저수지의 수원을 농업용수로 이용하는 내륙지역과는 달리 농업용수의 수원으로 지하수를 이용하고 있어 향후 기후변화로 인한 극단적인 가뭄과 농업형태의 변화등 지하수의 의존도는 가속화 될 전망이다. 따라서, 제주특별자치도는 지하수 관리차원에서 신규관정개발을 최소화 하고 용수공급량의 부족과 불균형을 해소시키기 위하여 2016년부터 농업용수 광역화 사업을 추진하고 있다. 본 연구는 제주특별자치도에서 추진하고 있는 '농업용수 광역화 사업'과 연계하여 용천수를 활용한 농업용 수자원 확보를 위하여 용천수 및 상시하천수의 정량적인 수량파악 및 농업용 수질기준에 적절한 유출수를 선정하고 제주지역 농업용수에 대체수자원을 활용한 지하수 의존비율을 저감시키는데 목표를 두고 수행되었다. 제주특별자치도 서귀포 지역에 분포하고 있는 16개 용천수 및 2개 상시하천을 대상으로 최종 해안으로 유출되는 10개 지점에서 농업용수 활용가능성을 검토한 결과 최소 유량 값은 각 지점별로 속골물 6,313.3($m^3$/일), 조이통물 11,406.3($m^3/day$), 꿩망물 8,402.8($m^3/day$), 선궷내물 4,290.8($m^3/day$), 논짓물 690.8($m^3/day$), 대왕수 1063.0($m^3/day$), 작지물 7,060.4($m^3/day$), 하강물 1,487.6($m^3/day$), 악근천 1,043.6($m^3/day$), 예래천 2,114.4($m^3/day$)로 산정되었으며, 수질 분석에 있어서는 작지물을 제외한 9개 지점에서 농업용수 사용 기준을 충족 하였다. 이상의 결과는 향후 제주특별자치도의 농업용수 공급량의 부족과 불균형 해소 및 지하수 관리차원의 신규관정 개발을 최소화 하는데 보탬이 될 것으로 판단된다.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.541-550
• /
• 1997

A least-square regression analysis is applied for the estimation of velocity streamfunction field based on discretely sampled current meter data. The coefficients of a streamfuunction that is expanded in terms of trigonometric basis function are obtained by enforcing the horizontal non-divergence of two-dimensional flow field. This method avoids Interpolation and gives a root-mean-square (rms) residual of fit which Includes the divergent part and noisiness of oceanic data. The Implementation of the method Is done by employing a boundary-fitted, curvilinear orthogonal coordinate which facilitates the specification of boundary conditions. An application is successfully made to the Texas-Louisiana shelf using the 32 months current meter data (31 moorings) observed as a part of the Texas-Louisiana Shelf and Transport Processes Study (LATEX). The rms residual of the fitting is relatively small for the shelf, which indicates the field Is Ivell represented by the streamnfunction.

• Journal of Environmental Impact Assessment
• /
• v.11 no.2
• /
• pp.79-91
• /
• 2002

Four dimensional data assimilation (FDDA) technique was considered for 3 dimensional wind field in coastal area and a set of 3 numerical experiments including control experiments has been tested for the case of the synoptic weather pattern of the weak northerly geostrophic wind with the cloud amount of less than 5/10 in autumn. A three dimensional land and sea breeze model with the sea surface temperature (SST) of 290K was performed without nudging the observed wind field and surface temperature of AWS (Automatic Weather System) for the control experiment. The results of the control experiment showed that the horizontal temperature gradient across the coastline was weakly simulated so that the strength of the sea breeze in the model was much weaker than that of observed one. The experiment with only observed horizontal wind field showed that both the pattern of local change of wind direction and the times of starting and ending of the land-sea breeze were fairly well simulated. However, the horizontal wind speed and vertical motion in the convergence zone were weakly simulated. The experiment with nudgings of both the surface temperature and wind speed showed that both the pattern of local change of wind direction and the times of starting and ending of the land-sea breeze were fairly well simulated even though the ending time of the sea breeze was delayed due to oversimulated temperature gradient along the shoreline.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.499-506
• /
• 2015

The friction velocity is a quantity with the dimensions of velocity defined by the friction stress and density of a wall surface at near wall of flow condition. Also, the friction velocity is the hydraulic parameter describing shear force at the bottom flow. Moreover, it is a very important factor in designing open channel and essential to determine the mixing coefficient in the main flow direction. The estimation of the friction velocity are such as methods using channel slope, linear law of the mean velocity at viscous sub-layer and direct measurement of wall shear stress, etc. In the present study, we propose a friction velocity equation that has been optimized by combining the concept of entropy, which is used in stochastic method, and to verify the proposed equation, the experimental data measured by Song was used. The R squared for friction velocities between proposed equation and friction velocity formula analyzed 0.999 to 1.000 in a very good agreement with each equation.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.309-324
• /
• 2001

To apply the real-time kinematic GPS surveying technique, this research has tried to obtain the TOKYO datum first from the continuous reference stations distributed all over the country. Then, analysis of the geography of a coastal area including both of land and sea has been carried out by the post-processed continuous kinematic GPS technique and the real-time kinematic GPS surveying technique. After considering the initial conditions and measuring time zone for real-time kinematic GPS, post-processed and the real-time kinematic GPS measurements have been carried out. A new system has been proposed to store measured data by using a program developed to store GPS data in real time and to monitor the satellite condition through controller simultaneously. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM can be also constructed for the harbor reclamation, the dredging and the variation of soil movement in a river.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.663-673
• /
• 2021

Normally, allowable mean overtopping discharge is used as a design parameter for coastal structures. The crest elevation of a structure must ensure wave overtopping discharge within acceptable limits for structural safety and the safety of pedestrians, vehicles, operations, and so on. Some researchers have alternatively proposed using the maximum individual wave overtopping volumes as design criteria during a design storm, since these can provide a better design measure than the mean overtopping rate. This study contributes to the knowledge on maximum individual overtopping volumes in Rayleigh-distributed wave conditions. Two-dimensional physical model tests on typical rubble mound structure geometries were performed, and the new measurement method for individual overtopping was adopted. An empirical formula was proposed to predict the maximum individual overtopping volumes based on the mean overtopping rate, and the reduction effects by the armor crest width on the mean wave overtopping discharge were assessed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.469-480
• /
• 2022

To design the crown wall of rubble-mound breakwaters, the horizontal wave load should be available, but determining this load remains difficult. Lee et al. proposed modification factors for Goda's formula for the horizontal wave pressures on acrown wall. The empirical formula by Lee et al. was based on a two-dimensional model test with a relatively narrow armour crest width in front of the crown wall. In this study, a series of experiments at the same facility were conducted on the horizontal wave pressures on the crown wall of a rubble-mound breakwater with a wide armour crest width. As a result, the pressures of the unprotected part of the crown wall were nearly identical to the narrow crest width. However, the pressures of the protected part tended to decrease with a change in the armour crest width. From the experimental results, the horizontal pressure modification factors of Goda's formula including the armour crest width effect are suggested here and are likely applicable to practical designs of the crown walls of rubble-mound breakwaters covered with tetrapods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.127-127
• /
• 2023

지표수와 하상 경계층에서 발생하는 흐름 교환은 하천, 호소, 연안, 해안 등 자연계에 존재하는 수환경시스템에서 일반적으로 나타나는 수리학적 특성으로서, 흐름 교환이 발생하는 경계층 아래 하상층 영역을 혼합대(hyporheic zone)라 부른다. 수질오염사고 등에 의해 외부의 오염물질이 하천 내 유입될 경우, 혼합대 흐름에 의해 하상층으로 침투되고 지표수 대비 유속이 느린 하상 내 공극 흐름에 의해 거동함에 따라 이들의 하천 내 체류시간이 증가하게 된다. 따라서, 본 연구에서는 지표수와 하상 흐름을 연계한 수치해석 방법을 적용하여 혼합대가 지표수 내 용질 체류시간에 미치는 영향을 분석하였다. 먼저 연직 2차원 Reynolds 평균 Navier-Stokes(RANS) 방정식과 Darcy 방정식을 연계하여 지표수와 하상 내 흐름을 해석하였다. 지표수 영역은 RANS 방정식을 이용하여 모의하였고, 지표수 흐름해석에서 얻어진 하상의 압력장을 경계조건으로 하여 Darcy 방정식과 함께 하상 내 흐름을 모의하였다. 여기서 하상의 형태는 자연계 하천에서 일반적으로 관찰되는 사련하상(Ripple bed)으로 모사하였다. 이후, 지표수-하상 연계모의를 통해 얻어진 흐름 결과를 바탕으로 지표수-하상 경계층에서 용질거동을 모의하였다. 흐름 모의결과를 과거 실험자료와 비교한 결과, 지표수 영역 내연직흐름 분포를 정확하게 재현하였고, 동시에 혼합대 흐름 구조에 큰 영향을 미치는 지표수-하상 경계층 압력 분포 역시 관측값과 유사하게 나타났다. 용질거동 해석을 통해 얻어진 용질의 체류시간을 분석한 결과, 혼합대 흐름이 고려된 경우(투수성 하상)와 고려되지 않은 경우(불투수성 하상)를 비교했을 때 전자에서 체류시간 분포의 감수곡선이 길어지고 첨두농도가 감소하는 것으로 나타났다. 아울러, 지표수 영역의 유입부 경계의 평균 유속이 증가함에 따라 최대 체류시간이 감소하는 것으로 나타났는데, 이는 지표수-하상 경계층에서의 압력 경사가 커져 혼합대 내 유속이 증가함에 기인하는 것으로 분석되었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.3
• /
• pp.174-183
• /
• 2014

Seabed beneath and near coastal structures may undergo large excess pore water pressure composed of oscillatory and residual components in the case of long durations of high wave loading. This excess pore water pressure may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, to evaluate the liquefaction potential on the seabed, numerical analysis was conducted using the expanded 2-dimensional numerical wave tank to account for an irregular wave field. In the condition of an irregular wave field, the dynamic wave pressure and water flow velocity acting on the seabed and the surface boundary of the composite breakwater structure were estimated. Simulation results were used as input data in a finite element computer program for elastoplastic seabed response. Simulations evaluated the time and spatial variations in excess pore water pressure, effective stress, and liquefaction potential in the seabed. Additionally, the deformation of the seabed and the displacement of the structure as a function of time were quantitatively evaluated. From the results of the analysis, the liquefaction potential at the seabed in front and rear of the composite breakwater was identified. Since the liquefied seabed particles have no resistance to force, scour potential could increase on the seabed. In addition, the strength decrease of the seabed due to the liquefaction can increase the structural motion and significantly influence the stability of the composite breakwater. Due to limitations of allowable paper length, the studied results were divided into two portions; (I) focusing on the dynamic response of structure, acceleration, deformation of seabed, and (II) focusing on the time variation in excess pore water pressure, liquefaction, effective stress path in the seabed. This paper corresponds to (II).