• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.744-748
• /
• 2010

4대강 살리기 사업에 있어 하천 준설 및 다목적 보 설치는 주요하천 상 하류의 일괄적인 준설을 통한 통수단면 확보로 홍수 소통능력을 극대화 하고, 친환경적 보설치를 통해 하도정비 실시이후에도 현재의 갈수위 이상의 수위를 유지하면서 홍수피해저감효과를 극대화하는 것을 목표로 한다. 4대강 사업시 콘크리트 형식으로 건설될 다목적 보는 월류식 구조물이지만 보의 저부에서 발생하는 양압력이나 기타 재하 하중과의 조합으로 인해 전도나 활동을 일으킬 수 있는 가능성을 가질 수 있고, 보의 규모가 커지고 가동보 등의 복합적인 형태를 가질 경우 보의 붕괴는 콘크리트 중력식 댐의 붕괴와 비슷한 양상을 가질 것으로 판단된다. 본 연구에서는 월류 구조물이 붕괴되었을때 상 하류 하천에 미치는 영향을 분석하고자 하였다. 자연하천 내의 보 붕괴 및 그에 따른 수위상승으로 인한 제방 붕괴시 실제 범람원에 안정적으로 적용가능한 고정확도 2차원 홍수범람 모형을 평가하였고, 가상하도 및 실험하도에 대한 적용을 실시하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.65-70
• /
• 2018

본 연구에서는 2차원 수치모형을 통해 보의 설치 각도 변화에 대한 보 상하류에서 흐름특성 변화와 하도 변화를 정량적으로 분석하였다. 수치모의 결과, 흐름은 경사형보를 월류하면서 경사진 방향으로 굴절되었으며, 보의 설치 각도가 증가할수록 흐름의 굴절 각도가 증가하는 경향을 보였다. 또한 보의 설치 각도가 증가할수록 무차원유속은 감소하였다. 보의 보 상류에서는 보의 의해 형성된 배수의 영향이 끝나는 지점에서 유사가 퇴적되어 델타가 발달하였다. 델타는 흐름방향을 따라 하류로 이동하였다. 이동속도는 보에 가까워질수록 감소하며, 크기는 증가하였다. 보 하류에서는 무차원 보의 길이가 증가함에 따라, 무차원 사주의 파장이 감소하고, 무차원 사주의 파고는 증가하였다.

• Geophysics and Geophysical Exploration
• /
• v.17 no.2
• /
• pp.49-57
• /
• 2014

3D magnetic inversion, based on the assemblage of 2D forward modeling and inversion as a practical technique to reflect the a priori information, was conducted to investigate the spatial distribution features of black-shale related and pyrometamorphic uranium deposit and several lithological units of Ogcheon Super Group in an area of Geumsan. By using the 3D visualization technique with suitable susceptibility interval and horizontal slice map, the spatial distribution of magnetic susceptibility corresponded to the black shale related uranium bearing lithological units, Black Slate member was well coincided with a information of uranium deposit. Also, even though it is indirect indicator for the detetction of uranium deposits interbedded in Gray Hornfels member, spatial susceptibility distribution which shows the south-east magnetic linearment corresponding to the Majeon-ri formation and Dark Gray Slate were matched well. From this investigation, we inferred that maximum depth extension which Black Slate member can be separately recognized with respect to adjacent Dark Gray Slate with strong magnetic susceptibility anomaly is about 150m with reference elevation level of 306m. In addition, Majeon-ri formation located south of Black Slate member revels relatively high magnetic susceptibility range but shows high spatial susceptibility fluctation. And, as an intrusive rocks, Jurassic Biotite Granite shows relatively low magnetic susceptibility characteristics. On the contrary, Cretaceous granite distributed in soutthern part of the study area shows the relatively high susceptibility distribution.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.3
• /
• pp.201-207
• /
• 2020

In this study, various types of porous beams were designed and analyzed to examine the relationship between the behavior of a porous beam and certain nonlocal parameters. The nonlocal parameters were defined as functions of the conditions of defects in the porous material. Finite element analysis was conducted on the beams under typical boundary and loading conditions. Beams with stiffeners having the same dimensions as the defects in the porous beams were also analyzed. The deformation tendency of these beams was determined and described in terms of the nonlocal parameters. The deformation of a porous beam was linearly proportional to the square of the diameters of the defects, whereas that of a beam with a stiffener was linearly proportional to the cube of the diameter of the stiffener. Furthermore, for a stiffened beam with axial loading, the results derived from a 3D solid element and those under 2D plane stress conditions were different.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.383-386
• /
• 2019

4 차산업혁명의 발달은 전 세계가 건강한 삶에 관련된 스마트시티 및 맞춤형 치료에 큰 관심을 갖게 하였고, 특히 기계학습 기술은 암을 극복하기 위한 유전체 기반의 정밀 의학 연구에 널리 활용되고 있어 암환자의 예후 예측 및 예후에 따른 맞춤형 치료 전략 수립 등을 가능케하였다. 하지만 암 예후 예측 연구에 주로 사용되는 유전자 발현량 데이터는 약 17,000 개의 유전자를 갖는 반면에 샘플의 수가 200 여개 밖에 없는 문제를 안고 있어, 예후 예측을 위한 신경망 모델의 일반화를 어렵게 한다. 이러한 문제를 해결하기 위해 본 연구에서는 고차원의 유전자 발현량 데이터를 신경망 모델이 효과적으로 학습할 수 있도록 2D 이미지로 표현하는 기법을 제안한다. 길이 17,000 인 1 차원 유전자 벡터를 64×64 크기의 2 차원 이미지로 사상하여 입력크기를 압축하였다. 2 차원 평면 상의 유전자 좌표를 구하기 위해 유전자 네트워크 데이터와 Node2Vec 이 활용되었고, 이미지 기반의 암 예후 예측을 수행하기 위해 합성곱 신경망 모델을 사용하였다. 제안하는 기법을 정확하게 평가하기 위해 이중 교차 검증 및 무작위 탐색 기법으로 모델 선택 및 평가 작업을 수행하였고, 그 결과로 베이스라인 모델인 고차원의 유전자 벡터를 입력 받는 다층 퍼셉트론 모델보다 더 높은 예측 정확도를 보여주는 것을 확인하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2840-2848
• /
• 1997

Recognition of 3D objects using computer vision is complicated by the fact that geometric features vary with view orientation. An important factor in designing recognition algorithms in such situations is understanding the variation of certain critical features. The features selected in this paper are the angles between landmarks in a scene. In a class of polyhedral objects the angles at certain vertices may form a distinct and characteristic alignment of faces. For many other classes of objects it may be possible to identify distinctive spacial arrangements of some readily identifiable landmarks. In this paper given an isotropic view orientation and an orthographic projection the two dimensional joint density function of two angles in a scene is derived. Also the joint density of all defining angles of a polygon in an image is derived. The analytic expressions for the densities are useful in determining statistical decision rules to recognize surfaces and objects. Experiments to evaluate the usefulness of the proposed methods are reported. Results indicate that the method is useful and powerful.

• Economic and Environmental Geology
• /
• v.48 no.4
• /
• pp.313-324
• /
• 2015

This study constructed a 3D geological model for Uggi Nuur Fe-Mn mineralization zone in Mongolia, and the 3D geological distribution is cross-analyzed with magnetic anomaly distribution to figure out relationship between ore zone and subsurface geology. As a result of 4 step 3D modeling procedures including geological cross section, surface modeling, foliation modeling and solid modeling, the geology of the both study area is bordered by faults in NW direction with Munguntessj formation being located in the west side of the fault while Yashill formation is located on the other side of the fault. Moreover, the strike direction of foliation in the both formation shows same directional pattern with the NW faults. The magnetic anomaly distribution reveals that higher anomaly values are concentrated to near the ground surface. The analyses of 3 dimensional distribution between subsurface geology and magnetic anomaly indicates that higher anomaly is mainly distributed over the Munguntessj formation as a elongated lens bodies whereas the magnetic anomaly is evenly found in the both of Munguntessj formation and Yashill formation in the study area 2. It infers that volcanic activities associated mineralization occurred during silurian period, and the mineralized zone is thought to be realigned along the geological structures caused by later stage tectonic activities.

• Computational Structural Engineering
• /
• v.8 no.4
• /
• pp.87-97
• /
• 1995

For the same configuration of two-dimensional finite element models, 6-node element exhibits stiffer bending stiffness than 8-node element. This is true in the relation between 16-node element and 20-node element for three-dimensional model. This stiffening phenomenon comes from the elimination of several mid nodes from full-node elements. Therefore, this may be called 'relative stiffness stiffening phenomenon'. It seems that there are a couple of ways to correct the stiffening effect, however, we could find only one effective method-the method of modification of Gauss sampling points-which passes the patch test and does not alter other kinds of stiffness, such as extensional stiffness. The quantity of modification is a function of Poisson's ratios of the constituent materials. We could obtain two modification equations, one for plane stress case and the other for plane strain case. This method can be extended to 3-dimensional solid elements. Except the exact plane strain cases, most 3-dimensional plates could be modeled successfully with 16-node element modified by the equation for the plane stress case. The effectiveness of the modification method is checked by applying it to several examples with excellent improvements. In numerical examples, beams with various boundary conditions are subjected to static and time-dependent loads. Free and forced motion analyses of beams and plates are also tested. The beam and plate may be composed of isotropic multilayers as well as a single layer.

• 전자공학회논문지 IE
• /
• v.47 no.4
• /
• pp.53-58
• /
• 2010

In this paper we propose symbol decision method reflecting the color non-uniformity in 3-dimensional color space. By comparing with 2-dimensional color space decision method, we show the superiority of BER performance of the proposed method. Proposed method may reflect the non-uniformity since the symbol decision boundary in color space is transformed from 3D RGB space, and one dimension corresponding to Y value is added. Therefore, we can obtain the better BER performance by using the symbol decision method in 3D color space. In this paper, through numerical simulation, show the superior BER performance of 3D color space symbol decision method compared with 2D color space symbol decision method under AWGN and common mode noise channel.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2001

Two-dimensional binary-phase diffraction gratings which can be employed to fabricate two- and three-dimensional periodic structures are designed and analyzed using rigorous coupled-wave analysis. These gratings serve as phase-masks which generate several diffracted waves from a normally incident beam and thus can produce a periodic interference pattern in space via nearfield holography. The properties of the diffracted beams can be controlled by varying the polarization and wavelength of the incident beam, surface-profile, groove depth and duty cycle of the mask. For the two-dimensional structure, optimum results can be obtained when the diffraction efficiency of the zero-order beam is minimized while that of the first-order maximized. On the other hand, when the diffraction efficiency of the zero-order is appreciable or even greater than other orders, we can obtain a variety of three-dimensional interference patterns which may be used to fabricate photonic crystals of tetragonal-body-centered and hexagonal structures in a submicron scale. scale.