• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.3-36
• /
• 2015

As of end of 2014, the population engaging in aviation activities for leisure has reached approximately 13 million, where approximately 356 cases involve a general aircraft, 200 cases involve light aircraft, and 636 cases involve an ULM. The industry for leisure has become a very promising industry in line with rapidly rising living standards which are expected to further increase in the future. The demand for such services is expected to increase over time. The purpose of this paper is to review the development and site selection of airfields in anticipation of these developments in the industry. While the government also has experience in the review of airfield location and candidate sites, it is not the government that carries out the actual construction. As such, the feasibility of the site needs to be verified in terms of actual construction. This study identified factors for Site Selection of factors through a review of related documents and existing research reports. A questionnaire was also used to collect the views of experts in the field, which was then analyzed. The Research model was confirmed in the layered form for an AHP analysis. The factors for Site Selection were identified as the technical / operational factors and economic / political elements for a two-stage configuration. The third step consisted of technical and operational elements. The final step is was constructed a total of 11 elements (weather, surface conditions, obstacle limitation surface, airspace conditions, operating procedures, noise problems, environmental issues, availability of facilities, construction and investment costs, contribution to the local economy, accessibility, demand / the proximity of demand). The surveys are conducted for more than 10 General and light aircraft pilots, professionals, and instructor. The analysis results showed a higher level in the technical / operating elements (73.2%) in the first step, while the next step sawa higher level of the operational elements (30.9%) than the other. The factors for Site Selection were any particular elements did not appear high, the weather conditions (17.5%), noise problems (19.8%), the proximity of demand (6%), accessibility (5.7%), environmental issues (11.1%), availability of facilities (8%), airspace conditions (7.9%), obstacle limitation surface (12%), construction and investment costs (4.2%) and to operating procedures (4.9%), contribution to the local economy (3.8%).

• Asia Marketing Journal
• /
• v.14 no.2
• /
• pp.127-156
• /
• 2012

A lot of interest in the baby-boomer generation, those who were born after World War II, has emerged since their retirement has been accelerated. The retirement of baby-boomers has caused many health, public welfare, social policy and family relationship problems. However, their increased purchasing power has made them more attractive consumers than any other generation, and they have become a fascinating niche market in the depressed economy. This research selected middle-class women of the baby-boomer generation who have had powerful effects on society and have emerged as an attractive niche market, and attempted to understand their lives intensively. Based on research activities, the purpose of this research is to identify baby-boomer generation middle-aged women's life values. Qualitative research methodology was used to achieve research objectives, and this research aimed to suggest marketing implications to connected industries based on the research results. The research objectives are as follows. 1. understanding the lives of baby-boomer middle-class women who have powerful effects on socio-economic phenomena 2. identifying the life values of baby-boomer middle-class women 3. generating marketing implications based on an understanding of baby-boomer middle-class women's lives and life values This research conducted FGIs(focus group interviews), one of the qualitative research methodologies, to figure out baby-boomer middle-class women's life values intensively and selected 10 women living in Seoul for data collection. The qualitative data of collected FGIs were analyzed with spiral data analysis methodology proposed by Creswell(2007). The most effective factors to influence these middle-class women's lives powerfully were 'time' and 'independence'. Their consciousness of the importance of using time affects their life pattern generally, and their independence also impacts greatly on the way they exploit time and on their diverse relationships. They maximized their self-realization and showed long-term partnership with their surrounding circumstances because of those effective factors. Baby-boomer middle-class women's self-realization was divided into two areas. One was their outside activities and another was perfect management of their physical appearance and home interior. Like the results of this research, their need for social entrance will be reinforced more strongly since their internal and external activities aim for the achievement of self-realization. In addition, this research suggests that baby-boomer middle-class women's activities are connected with their management of their physical appearance and home interior decorations, and that such management is caused not only by a simple interest in fashion and beauty but also a profound desire for self-realization. On account of their consciousness, which is different from other generations, Korean baby-boomer middle-class women are able to maintain positive partnerships with their surrounding circumstances; however, they also show ambivalent emotions to retain effective partnerships. To overcome those stressful situations, they make greater efforts to keep up their health and youth, and also engage in diverse activities to maintain their mental health. Finally, they generate positive attitudes toward their economic situation and extra time to develop self-realization and pursue happy, youthful and healthy lives. Based on those results, this study suggests the following implications. First, industries targeting the baby-boomer generation should develop innovative products and services which help the baby-boomer generation maximize their efficiency of time since time is one of the most important factors powerfully impacting the baby-boomer generation. They will engage in various activities to fill up their extra time and consume helpful products and services. Second, such industries should supply the baby-boomer generation with opportunities which propose new ways of self-realization since this generation shows a great desire for self-realization because of their self-efficacy. With customized strategies of satisfying their needs, the baby-boomer generation would discover opportunities to utilize their abilities, relationships and aesthetic senses, and industries would develop a niche market. Third, market segmentations which target the baby-boomer generation's desire to maintain their physical appearance and home interior should be executed since such activities are the main strategies to develop this generation's self-realization. The baby-boomer generation's desire to study those areas would be expanded, and those education systems should produce innovative products and services targeting the baby-boomer generation. This implication also offers to government officials new policies related with the baby-boomer generation. This exploratory study utilized qualitative research methodology to understand baby-boomer middle-class women's lives, and proposed propositions and limitations for further researches. As for the limitations, first, it is hard to generalize the research results so that they may apply to all areas and economic classes of the baby-boomer generation since this research selected only 10 women living in Seoul for the data collection process. To overcome this limitation, extended data collections of subjects from diverse regions and economic classes should be designed. Second, quantitative research should be conducted to supplement the findings with validities. Third, this research focused on only general ideas of the baby-boomer generation's lives since the range of this study was focused on their overall lives. Therefore, intensive research related to specific areas of their lives should be conducted.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.78-95
• /
• 2011

This study has developed various DEMs with different spatial resolutions using many different interpolation methods with the aid of a 1:5,000 digital map. In addition, this study has evaluated the vertical accuracy of various DEMs constructed by check point data obtained from the network RTK GPS survey. The obtained results suggest that a DEM developed from the TIN-based Terrain method performs well in evaluating height restriction of buildings in a flying safety area considering general RMSE values, land-type RMSE values and profile evaluation results, etc. And, it has been found that three meters is the right spatial resolution for a DEM in evaluating height restriction of buildings in a flying safety area. Meanwhile, elevation values obtained by the DEM are not point estimation values but interval estimation values. This can be used to check whether the height of buildings in the vicinity of an airfield violates height limitation values of the area. To check whether the height of buildings measured in interval estimation values violates height limitation values of the area, this study has adopted three steps: 1) high probability of violation, 2) low probability of violation, 3) inconclusiveness about the violation. The obtained results will provide an important basis for developing a GIS related to the evaluation of height restriction of buildings in the vicinity of an airfield. Furthermore, although results are limited to the study area, the vertical accuracy values of the DEM constructed from a two-dimensional digital map may provide useful information to researchers who try to use DEMs.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.365-371
• /
• 2012

The radiation therapy treatment technique is developed from 3D-CRT, IMRT to Tomotherapy. and these three technique was most widely using methods. We find out a comparison normal tissue doses and tumor dose of 3D-CRT, IMRT(Linac Based), and Tomotherapy on Head and Neck Cancer. We achieved radiological image used the Human model phantom (Anthropomorphic Phantom) and it was taken CT simulation (Slice Thickness : 3mm) and GTV was nasopharngeal region and PTV(including set-up margin) was GTV plus 2mm area. and transfer those images to the radiation planning system (3D-CRT - ADAC-Pinnacle3, Tomotherapy - Tomotherapy Hi-Art System). The prescription dose was 7020 cGy and measuring PTV's dose and nomal tissue (parotid gland, oral cavity, spinal cord). The PTV's doses was Tomotherapy, Linac Based - IMRT, 3D-CRT was 6923 cGy, 6901 cGy and 6718 cGy its dose value was meet TCP because its value was up to the 95% based on 7020 cGy, Nomal tissue (parotid gland, oral cavity, spinal cord) was 1966 cGy(Tomotherapy), 2405 cGy(IMRT), 2468 cGy(3D-CRT)[parotid gland], 2991 cGy(Tomotherapy), 3062 cGy(IMRT), 3684 cGy (3D-CRT)[oral cavity], 1768 cGy(Tomotherapy), 2151 cGy(IMRT), 4031 cGy(3D-CRT)[spinal cord] its value did not exceeded NTCP. All the treatment techniques are equated with tumor and nomal tissue doses. The 3D-CRT was worse than other techniques on dose distribution, but it is reasonable in terms of TCP and NTCP baseline Tomotherapy, IMRT -dose distribution was relatively superior- was hard to therapy to claustrophobic patients and patients with respiratory failure. Particularly, in case on Tomotherapy, it take MVCT before treatment so dose measurement will be unnecessary radiation exposure to patients. Conclusion, Tomotherapy was the best treatment technique and 2nd was IMRT, and 3rd 3D-CRT. But applicable differently depending on the the patient's condition even though dose not matter.

• Journal of Distribution Research
• /
• v.15 no.1
• /
• pp.73-101
• /
• 2010

Using data collected from franchisees from Busan, we empirically examined the relationship both structural (tie strength), relational (trust), and cognitive (shared value) of social capital and between those dimensions and the patterns of economic performance and noneconomic performance (relationship continuity intention). So we established 9 hypotheses to test the structural relationship among dimensions of social capital and performances like below. H1: A franchisee's perceived tie strength with its franchisor will positively influence its trust in the franchisor. H2: A franchisee's perceived shared value with its franchisor will positively influence its trust in the franchisor. H3: A franchisee's perceived tie strength with its franchisor will positively influence its economic performance. H4: A franchisee's perceived shared value with its franchisor will positively influence its economic performance. H5: A franchisee's perceived trust in its franchisor will positively influence its economic performance. H6: A franchisee's perceived tie strength with its franchisor will positively influence its relationship continuity intention with the franchisor. H7: A franchisee's perceived shared value with its franchisor will positively influence its relationship continuity intention with the franchisor. H8: A franchisee's perceived trust in its franchisor will positively influence its relationship continuity intention with the franchisor. H9: A franchisee's perceived economic performance will positively influence its relationship continuity intention with the franchisor. The conceptual model specifying the relationship among dimensions of social capital and performances is presented in Fig. 1. Tests of the hypotheses were performed using a structural equation model. This model also reflected a good fit to the data ($\chi^2$=101.12 df=62 p=0.004, RMSEA=0.050 GFI=0.936 AGFI=0.895 NFI=0.959 CFI=0.986). The standardized solution estimated by the AMOS 7 program was for interpreting the structural results (Table 1). As was expected, tie strength and shared value were founded to be significant predictors of trust (H1 supported; H2 supported). Tie strength and trust have a significant positive effect on economic performance (H3 supported; H5 supported). But shared value have not a significant effect on economic performance (H4 Rejected). Tie strength were not associated with relationship continuity intention (H6 Rejected). While on the other higher shared value, trust, and economic performance have a significant effect on the relationship continuity intention (H7 supported; H8 supported; H9 supported). The results show integratedly that, first, tie strength does not affect directly but affects indirectly on relationship continuity intention via trust and economic performance. Second, shared goals affect directly and do indirectly via trust on relationship continuity intention. But shared goals does not affect via economic performance on relationship continuity intention. Finally, the study suggests important implications for both research and practice for franchise system especially.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.324-332
• /
• 2011

Purpose: The purpose of this study was to compare the stress distribution of teeth and jaw on load by differentiating property of materials according to each layer of widely used mouthguard. Materials and methods: A Korean adult having normal cranium and mandible was selected to examine. A customized mouthguard was constructed by use of DRUFOMAT plate and DRUFOMAT-TE/-SQ of Dreve Co. according to Signature Mouthguard system. The cranium was scanned by means of computed tomography with 1mm interval. It was modeled with CANTIBio BIONIX/Body Builder program and simulated and interpreted using Alter HyperMesh program. The mouthguard was classified as follows according to the layers. (1) soft guard (Bioplast)(SG) (2) hard guard (Duran)(HG) (3) medium guard (Drufomat)(MG) (4) soft layer + hard layer (SG + HG) (5) hard layer + soft layer (HG + SG) (6) soft layer + hard layer + soft layer (SG + HG + SG) (7) hard layer + soft layer + hard layer (HG + SG + HG) The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were oblique ($45^{\circ}$). The impact load was 800 N for 0.1 sec. The stress distribution was measured at maxillary teeth, TMJ and maxilla. The statistics were conducted using Repeated ANOVA and in case of difference, Duncan test was used as post analysis. Results: In teeth and maxilla, the mouthguard contacting soft layer of mandibular teeth presented lowest stress measure and, in contrast, in condyle, the mouthguard contacting hard layer of mandibular teeth presented lowest stress measure. Conclusion: For all impact directions, soft layer + hard layer + soft layer, the mouthguard with three layers which the hard layer is sandwiched between two soft layers, showed relatively even distribution of stress in impact.

• Journal of Korea Water Resources Association
• /
• v.54 no.8
• /
• pp.629-641
• /
• 2021

In this study, a two-dimensional numerical model (Nays2DH) was applied to analyze the process of morphological changes in the river channel bed depending on the changes in the amount of flooding after fully opening the Sejong weir, which was constructed upstream of the Geum River. For this, numerical simulations were performed by assuming the flow conditions, such as a non-uniform flow (NF), unsteady flows (single flood event, SF), and a continuous flood event (CF). Here, in the cases of the SF and CF, the normalized hydrograph was calculated from real flood events, and then the hydrograph was reconfigured by the peak flow discharge according to the scenario, and then it was employed as the flow discharge at the upstream boundary condition. In this study, to quantitatively evaluate the morphological changes, we analyzed the time changes in the bed deformation the bed relief index (BRI), and we compared the aerial photographs of the study area and the numerical simulation results. As simulation results of the NF, when the steady flow discharge increases, the ratio of lower width to depth decreases and the speed of bar migration increases. The BRI initially increases, but the amount of change decreased with time. In addition, when the steady flow discharge increases, the BRI increased. In the case of SF, the speed of bar migration decreased with the change of the flow discharge. In terms of the morphological response to the peak flood discharge, the time lag also indicated. In other words, in the SF, the change of channel bed indicates a phase lag with respect to the hydraulic condition. In the result of numerical simulation of CF, the speed of bar migration depending on the peak flood discharges decreased exponentially despite the repeated flood occurrences. In addition, as in the result of SF, the phase lag indicated, and the speed of bar migration decreased exponentially. The BRI increased with time changes, but the rate of increase in the BRI was modest despite the continuous peak flooding. Through this study, the morphological changes based on the hydrological characteristics of the river were analyzed numerically, and the methodology suggested that a quantitative prediction for the river bed change according to the flow characteristic can be applied to the field.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.2
• /
• pp.109-117
• /
• 2013

The Global Framework on Climate Services (GFCS) will guide the development of climate services that link science-based climate information and predictions with climate-risk management and adaptation to climate change. GFCS structure is made up of 5 pillars; Observations/Monitoring (OBS), Research/ Modeling/ Prediction (RES), Climate Services Information System (CSIS) and User Interface Platform (UIP) which are all supplemented with Capacity Development (CD). Corresponding to each GFCS pillar, the Commission for Agricultural Meteorology (CAgM) has been proposing "Global Initiatives in AgroMeteorology" (GIAM) in order to facilitate GFCS implementation scheme from the perspective of AgroMeteorology - Global AgroMeteorological Outlook System (GAMOS) for OBS, Global AgroMeteorological Pilot Projects (GAMPP) for RES, Global Federation of AgroMeteorological Society (GFAMS) for UIP/RES, WAMIS next phase for CSIS/UIP, and Global Centers of Research and Excellence in AgroMeteorology (GCREAM) for CD, through which next generation experts will be brought up as virtuous cycle for human resource procurements. The World AgroMeteorological Information Service (WAMIS) is a dedicated web server in which agrometeorological bulletins and advisories from members are placed. CAgM is about to extend its service into a Grid portal to share computer resources, information and human resources with user communities as a part of GFCS. To facilitate ICT resources sharing, a specialized or dedicated Data Center or Production Center (DCPC) of WMO Information System for WAMIS is under implementation by Korea Meteorological Administration. CAgM will provide land surface information to support LDAS (Land Data Assimilation System) of next generation Earth System as an information provider. The International Society for Agricultural Meteorology (INSAM) is an Internet market place for agrometeorologists. In an effort to strengthen INSAM as UIP for research community in AgroMeteorology, it was proposed by CAgM to establish Global Federation of AgroMeteorological Society (GFAMS). CAgM will try to encourage the next generation agrometeorological experts through Global Center of Excellence in Research and Education in AgroMeteorology (GCREAM) including graduate programmes under the framework of GENRI as a governing hub of Global Initiatives in AgroMeteorology (GIAM of CAgM). It would be coordinated under the framework of GENRI as a governing hub for all global initiatives such as GFAMS, GAMPP, GAPON including WAMIS II, primarily targeting on GFCS implementations.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.839-853
• /
• 1998

The present study was performed to prove the relationship between CO-CR discrepancy and facial skeletal type. In this study, 242 subjects were randomly selected and devided into 9 groups(devided into class I, II, III by ANB and each one devided into dolicho-, brachy-, mesofacial skeleton by Ricketts' vertical index). Lateral cephalometric radiographs with the mandible in centric occlusion were taken and measured and CO and CR bites were registered on all subjects. Diagnostic casts were mounted on Panadent articulator using an estimated face-bow and centric relation bite registration. The amount and direction of CO-CR discrepancy present was recorded using a Condylar Position Indicator(CPI) and a centric occlusion wax bite registration. CPI measurements and cephalometric measurements were statistically analyzed. The finding of this study can be summerized as follows : 1. There is little correlation between right and left sides for magnitude or direction of CO-CR discrepancies. The correlation between the magnitude of CO-CR discrepancy of left A-P and right A-P is higher than that of left S-I and right S-I. 2. Correlation of Class II malocclusion group was higher than that of the other groups between the magnitude of CO-CR discrepancy of left CPI and right CPI. 3. There is no difference between the pattern of CO-CR discrepancy of 9 malocclusion groups. 4. There is very little, if any, correlation between Skeletofacial measurements and CO-CR discrepancy. 5. In Class II brachyfacial skeleton and Class III mesofacial skeleton there was Lateral cephalometric measurements by that we predict CPI measurements was detected. That was overbite, overjet, upper genial angle, lower genial angle, saddle angle, articular angle, convexity of point A, ANS-Me/Na-Me, PCBL/RH, Posterior FH/anterior FH.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.51-59
• /
• 2001

Column and box tests were performed to investigate the removal efficiency of NAPL using the surfactant enhanced flushing In heterogeneous medium. Homogeneous Ottawa sand and heterogeneous soil were used to verify the increase of remediation efficiency for the surfactant enhanced flushing in column test. Box tests with two different heterogeneous sub-structure were performed to quantify the capability of the surfactant enhanced flushing as a remediation method to remove NAPL from the heterogeneous medium. Two different grain size sand layers were repeated in the box to simulate the heterogeneous layer formation and the modified fault structure was built to simulate the fault system in the box. O-xylene as a LNAPL and PCE as a DNAPL were used and oleamide as a non-ionic surfactant. The maximum NAPL effluent concentration with 1% oleamide flushing in the homogeneous column test increased about 460 times compared to that with only water flushing and about 250 times increased in the real soil column test. In heterogeneous medium, the maximum effluent concentration increased about 150 times in 1% oleamide flushing and most of NAPL were removed from the box within 8 pore volume flushing, suggesting that the removal efficiency increased very much compared to in only water flushing. Results investigated the capability of the surfactant enhanced remediation method to remove NAPL even in heterogeneous medium.