• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.197-212
• /
• 2020

This study was carried out material characteristics and firing conditions for some potteries in early and middle Neolithic period at the Munamri sites, where the first farmland remails were found in Korea. It is divided into six kinds of surface patterns for potteries such as the raised, bamboo tube and red painted (patternless) from the early Neolithic period (BC 4000 to 6000), and the patterns of horizontal herringbone, short slanted lined or lattice and incised thick line in the middle Neolithic period (BC 3000 to 4000), respectively. Based on the color measures, redness and yellowness of potteries were relatively high as condition of oxidation firings, were also observed black cores on the cross section of potteries. The firing temperature is divided into two groups having under 800℃ and 800to 900℃, the difference in patterns of the potteries are not confirmed. As a microtextures, the bamboo tube pattern potteries show the sericitization biotite, the quartz have developed a suture line textures, and altered alkali feldspars are occurred. X-ray diffraction analysis shows that the main minerals contained in potteries are chlorite and amphibole besides quartz, alkali feldspar and biotite. Considering the geology around the Munamri area is the biotite amphibole granite and soil layers within 10km radius are used as the raw materials for the potteries. The raw materials are presumed that the sources from the metamorphic rocks along the water systems through the mountains around the sites on the basis of well developed suture line textured quartz in potteries. Results on normalized geochemical compositions, the potteries by surface patterns are very similar to sources, and it is judged that was made by using the surrounding soils despite the long time difference from the early to middle in the Neolithic period.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.288-302
• /
• 2017

Accurate measurement of benthic nutrient fluxes (BNF) is a prerequisite for evaluating the effect of sediments on nutrient cycle in the surface water. The intact sediment cores were collected in July 2015 at the midstream of Nakdong River. We identified pre-incubation time (6, 12, 24 hr), dissolved oxygen concentration (90, 70, 50% saturation), diffusive boundary layer thickness (0, 0.6-0.8, 1.2-1.4 mm), and incubation temperature (10, 17, 20, $25^{\circ}C$) as the most important control factors, and measured the BNF fluctuation with the variation of these factors using the laboratory sediment core incubation method. Since the chemical composition, redox condition, hydrodynamic regimes and microbial activities at the sediment-water interface were changed as a result of the alteration of control factors, sediment core incubation should be conducted under as close to the natural conditions of study site as possible, in order to produce the results similar to actual values. Relative percentage differences between two replicates were below 20% in most control factors, which showed satisfactory precision for strict compliance with the experimental conditions and procedures. In the further studies, we will compare the results of core incubation with those of in situ measurements to confirm the accuracy of the sediment core incubation method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.87-93
• /
• 2006

Inventories, and characteristics such as dimension, fuel rod array, weight, $^{235}U$ enrichment, and discharge burnup of spent nuclear fuel (SNF) generated from existing and planed nuclear power plants based on National 2nd Basic Plan for Electric Power Demand and Supply were investigated and projected to support geological disposal system design. The historical and projected inventory by the end 2057 is expected to be 20,500 and 14,800MTU for PWR and CANDU spent nuclear fuel, respectively. The quantity of SNF with initial $^{235}U$ enrichment of 4.5 wt.% and below was shown to be 96.5% in total. Average burnup of SNF revealed $\sim36$ GWD/MTU and $\sim40$ GWD/MTU for the period of 1994-1999 and 2000-2003, respectively. It is expected that the average burnup of SNF will be $\sim45$ GWD/MTU at the end of 2000's. From the comprehensive study, it was concluded that the imaginary SNF with $16\times16$ Korean Standard Fuel Assembly, cross section of $21.4cm\times21.4cm$, length of 453cm, mass of 672 kg, initial $^{235}U$ enrichment of 4.5 wt.%, discharge burnup of 55 GWD/MTU could cover almost all SNFs to be produced by 2057.

• Applied Biological Chemistry
• /
• v.42 no.3
• /
• pp.240-245
• /
• 1999

The starches were isolated from normal (Mudeung) and waxy (Chalssal) hull-less barleys which contained similar contents of ${\beta}-glucan$ and amylose. Their water binding capacity, swelling power and solubility were analyzed. Scanning electron microscopy showed most starch granules had predominant lense shape granules. The particle size of starch granules was in the range of $0.1{\sim}30\;{\mu}m$. The higher pasting temperature was found for $Mudeung(84^{\circ}C)$ than for $Chalssal(61.5^{\circ}C)$. However, Mudeung barley had a lower peak viscosity(535 BU) than that of Chalssal(1,510 BU). Differential scanning calorymetry analysis showed that To and Tp for two starches were 57.0, $60.6^{\circ}C$ for Mudeung, and were 57.0 and $62.2^{\circ}C$ for Chalssal, respectively. Enthalpy changes were 7.9 and 13.2 J/g for Mudeung and Chalssal, respectively.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.158-170
• /
• 2008

In response to the changing demands of ever competitive market, SK Telecom has built a new marketing system that can support dynamic marketing campaigns and, at the same time, scale up to the large volumes of data and transactions for the next decade. The system which employs Unix-based client-server (using Web browser interfaces) architecture will replace the current mainframe-based COIS system. The project, named NGM (Next Generation Marketing ), is unprecedentedly large in scale. However, both managerial and technical problems led the project into a crisis. The application framework that depended on a software solution from a major global vendor could not support the dynamic functionalities required for the new system. In March 2005, SK telecom declared the suspension of the NGM project. The second phase of the project started in May 2005 following a comprehensive replanning. It was decided that no single existing solution could cope with the complexity of the new system and hence the new system would be custom-built. As such. a number of technical challenges emerged. In this paper, we report on the three key dimensions of technical challenges - middleware and application framework, database architecture and tuning, and system performance. The processes and approaches, adopted in building NGM system, may be viewed as "best practices" in the telecom industry. The completed NGM system, now called "U.key System," successfully came into operation on the ninth of October, 2006. This new infrastructure is expected to give birth to a series of innovative, fruitful, and customer-oriented applications in the near future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.588-594
• /
• 2020

This study proposes non-destructive rebound-hardness and ultrasonic testing methods to more accurately evaluate the residual structural performance of reinforced concrete structures in a fire. Techniques are also proposed to assess the stiffness used in the deflection calculation with natural frequencies obtained by vibration tests. In the compressive strength evaluation using rebound hardness, the residual compressive strength of thick specimens and a larger water/cement (W/C) ratio were shown to be large. The homogeneity of concrete at high temperature compared to ambient temperature conditions was assessed by the velocity of ultrasonic waves that penetrate the concrete, and it followed W/C or thickness of slab makes little different results. To assess the stiffness of fire-damaged slabs and increase in deflection, the natural frequency was measured by vibration tests and incorporated into the equation of the stiffness. The application of this technique to the slab experiment showed that it can be a very reasonable evaluation technique. In addition, to evaluate the residual strength of a member after fire, a test of the strength of a component was carried out during and after heating.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2013

Purpose: The aim of this study was to determine a suitable type and size of Hangul fonts for printed materials in the presbyopic age. Methods: Based on the most common Hangul fonts used today, three types of fonts were used Hamchrombatang, Sinmoonmyungjo and Sinmyungjo at small font sizes in the range 9-11 point (pt). Subjects were 101 volunteers aged 41 through 85 years. Near visual acuity (VA) was corrected to read VA 0.5 at 40 cm after distance correction. The subjects were asked to read words containing 88 characters in 10 pt after a question about preference. Readability was assessed by reading rate that was calculated as the number of words read correctly in one minute (words per minute, wpm). Results: The most preferred font type was Simmyungjo at small font sizes. Although preferred font sizes were different in each font type, Sinmyungjo was generally preferred at 10 pt more than other fonts. Hamchrombatang and Sinmyungjo were read significantly faster than Sinmoonmyungjo. There was a weak negative relationship between readability and age in Sinmyungjo. In comparing between the top 10% and the bottom 10% group sorted by reading rate, the top group showed lower average age and addition than the bottom group, however there were no significant differences in reading rate among the fonts. Conclusions: Although increasing age tends to be low in readability for Sinmyungjo, in the light of preferred font and readability, it is recommended to use a 10 pt Sinmyungjo font in printed materials for the presbyopic age.

• Journal of Bio-Environment Control
• /
• v.13 no.2
• /
• pp.73-80
• /
• 2004

Two red pepper(Capsicum annuum L.) cultivars, 'Geumtap' and 'Bugang', were cultivated at main producing areas in Korea and harvested four times in 1998 and 1999. Length, weight, dry matter ratio and color of red peppers were measured at each harvest. The relations between external characteristics with regional climatic elements such as total accumulated air temperature, total amount of precipitation and duration of sunshine during the fruit growing periods were compared. Length and fruit weight decreased by delayed harvest. These characteristics were shown significant difference according to cultivars, but not to growing year. Dry matter ratio had a tendency to increase at the 3rd and 4th harvest. The red color as measured a${\times}$L values of pepper powder, increased with being later in harvesting, but the trend was uncertain. In fruit growth, fruit length showed a positive correlation with total accumulated air temperature in later growth period of fruits(from 1st to 20th day before harvesting), and fruit weight had relationships with accumulated air temperature and total amount of precipitation in later growth period of fruit. There was no relation between dry matter ratio and climate elements. The red color was shown high correlations with total amount of precipitation and duration of sunshine. There was highest coefficient of determination($r^2$) in all external characteristics.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.371-376
• /
• 2014

Purpose: The aim of this study was to explore the effect of artificially decreased eye in normal vision on eye-hand coordination (EHC) when using the Lee-Ryan Eye-Hand Coordination Test recently reported. Methods: Eleven adults with normal vision aged $29.46{\pm}5.94$ years participated for this study where a non-dominant eye artificially induced moderate refractive amblyopic vision at near by adding a plus lens conducted EHC tasks and then did the test again under normal vision following 2 weeks. To investigate the ability of EHC, 7 tasks including individually different level of difficulty in the Lee-Ryan EHC Test were selected to compare and analyze EHC in terms of two independent variables such as time taken and the number of errors. Results: In time taken, subjects with artificially decreased vision took more time than normal vision under monocular conditions (p=0.013), while those with the decreased vision completed their tasks faster than normal vision under binocular conditions (p=0.001). In the number of errors, subjects with the decreased vision made more mistakes (p<0.001) as shown in time taken, whereas there was no difference between monocular and binocular viewing conditions in the decreased vision. Conclusions: Unlike previous EHC tests including limitations for application, deficit in EHC can be screened by the Lee-Ryan EHC Test developed based on simple computer-based system. Therefore, it is considered that further studies relevant to deficits in visual function such as amblyopia will be carried out in clinics as well as research.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.445-458
• /
• 2007

The purpose of this study was to evaluate the bond strength of a new Single step system with different curing mode composites, and to evaluate the effect of the intermediate resins which have different hydrophilicity on bonding ability by means of the micro shear bond testing and TEM examination for the adhesive interface. The adhesive used in this study was an experimental single step system (Bisco Inc., Schaumburg IL). Experimental groups were produced by using six kinds of intermediate resin having different hydrophilicity that was hydrophilic, hydrophobic and most hydrophobic resin and as filled or not after applying adhesive. Each experimental group was further divided into two subgroups whether the adhesive was light cured or not. Dual cured composite (Bis Core, Bisco Ltd., Schaumburg, IL) was placed on the adhesive layer as light cure or self cure mode. The results or bond strength were statistically analyzed using one way ANOVA and multiple comparisons are made using Tukey's test at ${\alpha}\;<\;0.05$ level. The results of this study were as follows ; 1. The application of intermediate resin did not increase the bond strength for light cured composite. 2. The bond strength of an experimental adhesive with self cured composite was significantly increased by the application of intermediate resin layer. 3. The bond strength of adhesive was irrespective of the cure or not of itself before intermediate resin layer applied. 4. As applied hydrophilic resin layer was, the initial bond strength was higher than both hydrophobic and most hydrophobic one used but there was no significance. Using a single step adhesive with dual/self cured composite, the incompatibility between both of them should be solved by the application of intermediate hydrophobic resin to reduce the adhesive permeability. However, Single step adhesive can be used in the light cured composite restoration without any decrease of the initial bond strength.