• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.143-150
• /
• 2006

The quickest path problem deals with the transmission of a message of size ${\sigma}$ from a source to a destination with the minimum end to end delay over a network with bandwidth and delay constraints on the links. We consider two basic modes and four variations for the message delivery at the nodes reflecting the mechanisms such as circuit switching. Internet protocol, and their combinations, For each of first five modes, we present O($m^2+mnlogn$) algorithm to compute the quickest path for a given message size ${\sigma}$, For the last mode, the quickest path can be computed in O(m+nlogn) time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5C
• /
• pp.487-495
• /
• 2007

When error occurs during the network transmission of the image, the quality of the restored image is very serious. Therefore to maintain the received image quality, the error concealment technique is necessary. This paper presents an efficient spatial error concealment method using adaptive edge-oriented interpolation. It deals with errors on slice level. The proposed method uses boundary matching method having 2-step processes. We divide error block into external and internal region, adaptively restore each region. Because this method use overall as well as local edge characteristics, it preserves edge continuity and texture feature. The proposed technique reduces the complexity and provide better reconstruction quality for damaged images than the previous methods.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.42.2-42.2
• /
• 2009

연속주조공정에서 용강의 통로, 산화방지 및 유체 흐름을 용이하게 하는 역할을 하는 다공성 노즐(porous nozzle)은 용강과의 직접적인 접촉으로 인한 화학 반응 및 용강의 침투현상을 방지하기 위해 불활성 가스를 주입하여 청정강을 제조하는데 이용된다. 공정 중 노즐 막힘으로 인한 배압상승과 열충격에 의한 크랙(crack) 발생이 문제되고 있으며 신뢰성 향상 연구가 요구되고 있다. 따라서 본 연구에서는 기공크기와 기공분포가 고온안정성 및 내열충격성에 미치는 영향을 알아보고, 내구성 시험 및 고장분석을 통하여 노즐의 신뢰성 향상 방안을 고찰 하였다. 기공을 제어한 시편을 제조하여 기공분포에 따른 고온안정성을 확인하기 위해 실제 사용 조건인 용강온도($1550^{\circ}C$)와 보다 높은 온도($1700^{\circ}C$)에서 각각 고온 시험을 수행하였다. 열충격을 스트레스 인자로 한 내구성 시험을 수행한 후 고장원인을 분석하였으며 열화정도를 확인하기 위해 열처리 온도에 따른 차압 및 굽힘 강도 변화를 비교하였다. 또한 결정상 분석을 통해 온도에 대한 상변화를 확인하였고, 시편의 표면 및 파단면의 미세구조 분석을 통해 크랙 발생여부를 확인하였다. 다공성 노즐의 기공분포가 균일 할수록 고온안정성 및 내열충격성이 향상됨을 확인하였고, 이를 통해 Porous Nozzle의 열화원인으로 판단되는 기공 크기 및 분포에 따른 크랙 발생에 대해 열응력 고찰을 수행하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.3
• /
• pp.146-159
• /
• 2016

This study used Navier-Stokes Solver(LES-WASS-2D) for analyzing hydrodynamic characteristics with high order in order to analyze self-burial mechanism of pipeline with spoiler under steady flow. For the validity and effectiveness of numerical model used, it was compared and analyzed with the experiment to show flow characteristics around the pipeline with and without the spoiler. And the hydraulic(flow, vortex, and pressure) and force characteristics were numerically analyzed around the pipeline according to the incident velocity, and shape and arrangement of spoiler. Primarily, if the spoiler is attached to the pipeline, the projected area is increased resulting in higher flow velocity toward the back and strong vortex caused by wake stream in the back. Secondly, the spoiler causes vertically asymmetric flow and vorticity fields and thus asymmetric pressure field. It increases the asymmetry of force on the pipe and thus develops large downward fluid force. Both of them are the causes of selfburying of the pipeline with spoiler.

• Journal of the Economic Geographical Society of Korea
• /
• v.9 no.3
• /
• pp.379-395
• /
• 2006

The purpose of this study is to analyze the spatial characteristics of travel patterns and travel behaviors of transit users in the Metropolitan Seoul area. We apply the data mining techniques to explore the travel patterns of transit users from the T-money card database which has been produced over 10,000,000 transaction records per day. The database contains the information of locations and times of origin, transfer, and destination points for each transaction as well as the informations of transit modes taken via the transaction. We develop an data mining algorithm to explore traversal patterns from the enormous information. The algorithm determines the travel sequences of each passenger, and produce the volumes of support on each points (stops) of transportation networks in the Metropolitan Seoul area. In order to visualize the spatial patterns of travel demands for transit systems we apply GIS techniques, and attempt to investigate the spatial characteristics of travel patterns and travel demand. Subway stops located in the Gangnam area appear the highest peak for the travel origin and destination, while the CBD in the Gangbuk stands at the second position. Two or three sub-peaks appear at the densely populated residential areas developed as the high-rise apartment complex. Subway stations located along the Subway Line 2, especially from Guro to Samsung receive heavy travel demand (total support), while bus stops located at the CBD in the Gangbuk stands the highest travel demand by bus.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1458-1463
• /
• 2004

By using unique experimental techniques and careful construction of the experimental apparatus, the characteristics of the local heat transfer were investigated using the condensing R134a two-phase flow, in horizontal single mini-channels. The circular channels ($D_h=0.493$, 0.691, and 1.067 mm) and rectangular channels ($D_h=0.494$, 0.658, and 0.972 mm) were tested and compared. Tests were performed for a mass flux of 100, 200, 400, and 600 $kg/m^2s$, a heat flux of 5 to 20 $kW/m^2$, and a saturation temperature of $40^{\circ}C$. In this study, effect of heat flux, mass flux, vapor qualities, hydraulic diameter, and channel geometry on flow condensation were investigated and the experimental local condensation heat transfer coefficients are shown. The experimental data of condensation Nusselt number are compared with existing correlations.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.210-213
• /
• 2004

본 논문은 스프레드시트 수준에서 처리하고 있는 (주)광성브레이크의 업무를 통합하여 신속, 원활하게 수행할 수 있는 ERP시스템을 설계하고 구현한다. 먼저, 각종 업무에서 사용되는 스프레드시트들를 분석하여 회사업무의 전체 흐름을 파악하고, 또한 기초, 자재, 생산, 영업의 4개 업무를 통합하여 운용할 수 있도록 통합 데이터베이스를 설계/구축하고, 구축된 데이터베이스와 연동을 갖는 업무 관리프로그램을 설계/구현한다. 개발된 시스템은 각 업무간에 완벽한 통합성을 제공하고, 또한 논문에서 설계한 ERP시스템이 J2EE 플렛폼상에서 개발하였기 때문에, 특정 기종에 제한하지 않고 사용할 수 있다.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.215-219
• /
• 2007

This study was conducted to analyze not only for the quality guaranteed of red ginseng but also for the minor ginsenosides. Although several studies have reported to analyze ginseng saponins, those were focused to major saponins, including 6 to 7 ginsenosides. As increase of interest in medicinal effect of ginseng products, anasis of various ginsenosides in both red and white ginseng are strongly demanded. To perform optital condition of 12 ginsenoside analysis, We controlled HPLC conditions, such as the gradient elution of the mobile phase. We found the adequate separation method for 12 ginse-nosides. The optimum condition was as following : H$_2$O/CH$_3$CN ratios were 82/18, 70/30, 55/45 and 50/50, respectively. Sol-vent flow rate was 1.00 ma/min. Column temperature was kept to 35$^{\circ}$C. UV detector was set to 203 nm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.113-113
• /
• 2017

중소하천에서 홍수 시 보 주변 흐름은 잠수월류(submerged overflow)의 형태이고, 이러한 조건 하의 보 파괴원인 중 가장 큰 부분은 제방과의 연결부에서 발생하는 세굴로 인한 것이다. 그러나 하천설계기준(2009)에서는 보 연결부 보호공에 대해 수리학적 특성과 유사적 특성을 고려한 적절한 세굴 범위를 제시하지 못하고 있는 실정이다. 또한 기존의 연구들은 주로 고정상 실험결과를 이용하여 세굴범위를 제시하고 있으며, 제체의 재료적 특성을 고려한 연구가 상대적으로 미약한 실정이다. 이에 본 연구에서는 제체의 재료적 특성(점성을 가진 유사 특성)을 고려하여 잠수월류 시 보 하류부 제방의 세굴길이를 도출하였다. 본 연구방법으로 이론적 접근에서 보 연결부 세굴을 유발하는 주요인자들을 활용하여 관계식을 제안하였고, 수리실험을 통해 제안된 식의 검증을 수행하였다. 수리실험은 균일 사다리꼴 단면의 직선 수로($7.0m(L){\times}2.0m(B){\times}0.5m(H)$)에서 이동상 제방구간(2.0m)과 고정상 제방구간을 나누어 실험의 효율성을 높이고자 하였으며, 이동상 제방 전용 다짐판 및 다짐 봉 등 자체적으로 제작된 실험 장비들이 이용되었다. 실험결과와 제시된 이론적 접근의 비교를 통해 제시된 이론식이 제체의 다짐도의 영향이 고려가 되지 않았음을 가정하였으며, Lee et al.(2001)의 연구를 참고하여 제체에 대한 다짐의 영향을 고려한 후 두 값들이 선형적인 비례 관계가 나타남을 확인하였다. 최종적으로 이러한 관계를 모두 고려한 잠수월류 시 보 하류부 세굴길이에 대한 예측식을 제안하였다. 본 예측식은 하천 계획 및 설계시 호안의 범위를 산정하는데 참고자료로 유용할 것으로 판단된다. 향후에는 완전월류(perfect overflow)에서 보 연결부 세굴에 대한 연구를 수행하여, 월류 형태 별 제방 세굴길이에 대한 연구를 완성하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.97-106
• /
• 1989

This paper is on the modeling of two-dimensional groundwater flow, which is the first step of the development of Dynamic System Model for groundwater flow and pollutant transport in subsurface porous media. The particular features of the model are its versatility and flexibility to deal with as many real-world problems as possible. Points as well as distributed sources/sinks are included to represent recharges/pumping and rainfall infiltrations. All sources/sinks can be transient or steady state. Prescribed hydraulic head on the Dirichlet boundaries and fluxes on Neumann or Cauchy boundaries can be time-dependent or constant. Sources/sinks strength over each element and node, hydraulic head at each Dirichlet boundary node and flux at each boundary segment can vary independently of each other. Either completely confined or completely unconfined aquifers, or partially confined and partially unconfined aquifers can be dealt with effectively. Discretization of a compound region with very irregular curved boundaries is made easy by including both quadrilateral and triangular elements in the formulation. Large-field problems can be solved efficiently by including a pointwise iterative solution strategy as an optional alternative to the direct elimination solution methed for the matrix equation approximating the partial differential equation of groundwater flow. The model also includes transient flow through confining leaky aquifers lying above and/or below the aquifer of interest. The model is verified against three simple cases to which analytical solutions are available. The groundwater flow model shall be combined with the model of pollutant transport in subsurface porous media. Then the combined model, with the applications of the Eigenvalue technique and the Dynamic system theory, shall be improved to the Dynamic System Model which can simulate the real groundwater flow and the pollutant transport accurately and effectively for the analyses and predictions.