• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.167-172
• /
• 2006

In this paper, the 25W power amplifier for UHF band radio transceiver has been designed and realized. The power amplifier was composed of drive, power amplifier and control stages. Feedback topology and coaxial line baluns were used for wide band operation. The VDMOS, which has reliable performance for linearity and efficiency, was used for power device and designed to operate as push-pull amplification at Class AB Bias. The power amplifier designed in such a way was found to show stable AM modulation performance when voice signal was detected at the gate stage, with being designed and realized to meet output specifications of commercial air traffic control transmitter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.4
• /
• pp.313-322
• /
• 2005

In this paper, High power factor electronic ballast using a double resonant Inverter for 250[W] MHD lamp is designed and implemented. Proposed electronic ballast is composed of configuration that is cascaded boost active PFC circuit as power factor corrector and half-bridge double resonant inverter Into two stage approach. Theoretical analysis of circuit and characteristics estimation is generally illustrated by using normalized parameter. To remove the phenomenon of acoustic resonance in the lamp, Simple frequency controller composed timer IC and driving IC is designed and employed on the ballast. The experimental results show that an high power factor electronic ballast using a double resonant inverter is operated stably.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.71-73
• /
• 2007

본 논문은 질화갈륨 전력 소자를 이용한 이동통신 중계기 및 기지국용 전력증폭기 모듈의 설계에 대하여 기술하고 있다. 전력 버짓 분석을 통하여 전치증폭기와 구동증폭기, 그리고 최종단 고출력증폭기의 전력 용량을 계산하였고, 여기에 적합한 질화갈륨 소자를 선택하였다. 최종 개발에 앞선 초기버젼의 전력증폭기를 구성하여 1-tone과 2-tone에 대하여 전력특성을 측정해 보았다.

• Particle and aerosol research
• /
• v.16 no.3
• /
• pp.65-72
• /
• 2020

In this study, the indoor fine dust concentration in an office of the Korea Knowledge Industry Center was measured for about 80 hours when the concentration of atmospheric PM_2.5 was very high. The effect of the operation of the air cleaner and the forced ventilation system on the indoor PM_2.5 was investigated, and the particle size distribution of the indoor and outdoor particles was analyzed. When forced ventilator and air purifiers were partially used, the indoor PM_2.5 concentrations were maintained between 27.7 ㎍/㎥ and 32.9 ㎍/㎥ when the atmospheric PM_2.5 was 127.7 ㎍/㎥ to 141.6 ㎍/㎥ during working hours. It is more effective to operate the air purifier without operating the forced ventilation system when the concentration of the PM_2.5 is high since the PM_2.5 penetrating the installed filter is continuously introduced indoor from the outside.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.72-75
• /
• 2012

In this paper, high-efficiency DC-AC converter is implemented for the wireless power transmission. The DC-AC converter is implemented by combining the oscillator and power amplifier. Because the conversion efficiency of wireless power transmitter is strongly affected by the efficiency of power amplifier, the high-efficiency power amplifier is implemented by using the Class-E amplifier structure. Also, because the output power of oscillator connected to the input stage of power amplifier is low, high-gain two-stages power amplifier using the drive amplifier is implemented to realize the high-output power DC-AC converter. The dual band harmonic suppression filter is implemented to suppress 2nd, 3rd harmonics of 13.56 MHz. The output power and conversion efficiency of DC-AC converter are 40 dBm and 80.2 % at the operation frequency of 13.56 MHz.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.3
• /
• pp.229-236
• /
• 2008

Recently, multilevel H-bridge inverters have become popular in medium to high power ac drive applications. One of significant advantages of them is low harmonic contents in their input line currents thanks to the transformer with multiple phase-shifted secondary windings. This paper attempts to provide basic guidelines for the design of the phase shifting transformer windings and theoretical analysis of input line current harmonics of H-bridge inverters. The part I provides the derivation of basic relationships between input and output current of the transformer and the relationship between the phase shifting characteristics and design aspects of the transformer.

• Journal of Biosystems Engineering
• /
• v.27 no.2
• /
• pp.97-106
• /
• 2002

이 연구는 채소의 생산에서 가장 많은 노동력이 소요되고 단순ㆍ반복적인 결속작업의 기계화기술을 개발하기 위하여 수행되었다. 본 논문은 이 연구의 제1보로서 채소의 결속작업실태를 조사분석하여 결속기의 개발방향을 설정하고, 채소의 이송 및 결속끈의 공급장치를 개발한 결과를 수록한 것이다. 채소의 결속작업은 철심이 내장된 끈을 사용하여 타원형으로 결속하고 있었으며, 작업자가 경험적으로 계량하여 결속된 단의 크기는 작물별 차이는 있으나 동일 작물에서 작업자간 차이는 없는 것으로 나타났다. 따라서 결속기는 작업자가 채소를 공급하면 일정 길이의 결속끈을 사용하여 타원형으로 결속하여 배출하는 방식으로 개발한 필요성이 있다고 생각된다. 이를 위해서 결속기는 작업자가 채소를 용이하게 공급할 수 있으며 결속장치까지 흐트러짐이 없이 이송하는 채소의 이송장치, 결속끈의 길이를 조절하여 공급하는 결속끈의 공급장치, 이송된 채소를 결속끈을 꼬아서 타원형으로 결속하는 결속장치 등으로 구성되어야 할 것이다. 채소의 이송장치는 작업자가 채소의 일정량을 용이하게 공급할 수 있도록 폭의 조절이 가능한 트레이를 체인콘베이어에 부착한 구조, 결속끈의 공급장치는 압축력이 걸려 있는 우레탄 재질의 구동 및 종동롤러로 원하는 길이의 결속끈을 피딩하면 칼날로 절단하는 구조로 개발하였다.

• Journal of Aerospace System Engineering
• /
• v.18 no.2
• /
• pp.79-86
• /
• 2024

We have developed software for the SMFD that utilizes a range of graphic design tools. These tools enable us to effortlessly create graphic elements by defining their attributes, such as position and motion. Subsequently, we can convert these designs into source code and execute the resulting software on the target system, leveraging the graphic engines provided by the tools. However, when it comes to developing the displaying software for the SMFD using multiple graphic design tools on a single system, we face various challenges. In this paper, we will delve into these challenges and propose solutions for developing the displaying software for SMFD based on heterogeneous display design tools.

• Restorative Dentistry and Endodontics
• /
• v.27 no.3
• /
• pp.270-276
• /
• 2002

치근단 수술시 구동형 수술현미경과 미세수술기구들이 사용됨에 따라 치근단 절제술 후 역충전와동의 효과적인 형성 및 충전을 위해 새로운 초음파기구가 개발되었다 따라서 본 연구에서는 최근 상품화되어 사용되고 있는 초음파기구중 신속하게 역충전와동을 형성할 뿐아니라 충분한 깊이를 제공하여 역충전재료의 변연누출 감소에 효과적인 것으로 알려져 있는 3종의 초음파기구를 사용하여 역 충전와동을 형성 한 후 SuperEBA로 충전하여 그 변연누출을 비교하였다. 모두 56개의 근첨형성이 완료된 단근치를 선택하여 Profile .06를 사용하여 근관형성한 후 음성대조군 2개를 제외한 54개의 치아를 수직가압법으로 충전하였다. 근단부 3mm를 절제한 뒤 KaVo Isthmus, KaVo T-shape 그리고 KiS tip을 각각 18개의 치아에 사용하여 역충전와동을 형성하고 그중 각각 2개의 양성대조군 치아를 제외한 나머지 치아에 SuperEBA로 충전하였다. 각치아는 1% methylene blue dye에 침윤시켜 1주일 후 종절단하여 그 색소침투정도를 측정, 비교하였다. 실험결과 측정된 평균 변연누출은 KaVo Isthmus가 $1.5\pm$1.4mm, KaVo T-shape이 1.7$\pm$1.2mm이고 KiS tip은 1.1$\pm$0.7mm 이었으며, 통계적으로 유의할만한 차이는 없었다. 따라서 초음파기구를 사용한 역충전와동의 임상시술 성공여부는 술자의 편의도와 임상적 사용시 조작능력에 달려 있는 것으로 사료된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1079-1086
• /
• 2012

In this paper, X-band 60 W Solid-State Power Amplifier with sequential control circuit and pulse width variation circuit for improve bias of SSPA module was designed. The sequential control circuit operate in regular sequence drain bias switching of GaAs FET. The distortion and efficiency of output signals due to SSPA nonlinear degradation is increased by making operate in regular sequence the drain bias wider than that of RF input signals pulse width if only input signal using pulsed width variation. The GaAs FETs are used for the 60 W SSPA module which is consists of 3-stage modules, pre-amplifier stage, driver-amplifier stage and main-power amplifier stage. The main power amplifier stage is implemented with the power combiner, as a balanced amplifier structure, to obtain the power greater than 60 W. The designed SSPA modules has 50 dB gain, pulse period 1 msec, pulse width 100 us, 10 % duty cycle and 60 watts output power in the frequency range of 9.2~9.6 GHz and it can be applied to solid-state pulse compression radar using pulse SSPA.