Journal of the korean academy of Pediatric Dentistry
/
v.33
no.2
/
pp.221-232
/
2006
The purpose of this study was to investigate the effect of step-curing mode on polymerization shrinkage and contraction of composite resin restoration. Class I cavities were prepared on the extracted human premolars. The cavities were ailed with Filtek $Z-250^{TM}$ (hybrid resin, 3M ESPE, USA) and Filtek $flow^{TM}$ (flowable resin, 3M ESPE, USA) and cured with one of the following irradiation modes; Halogen 40sec with continuous curing, LED 10sec with continuous curing, and LED 13sec with step-curing. Contraction stress was measured with strain gauge which was connected to TML $Datalogger^{TM}$ (TDS-102, SOKKI, Japan) and resin-dentin interfaces were observed by scanning electron microscope. The results of present study can be summarized as follows : 1. Composite resin restoration showed transient expansion just after irradiation of curing light. Contraction stress was increased rapidly at the early phase of polymerization and reduced slowly as time elapsed (P<0.05) 2. $Filtek\;flow^{TM}$ showed lower contraction stress than Filtek $Z-250^{TM}$ regardless of curing modes. 3. LED step-curing mode showed lowest contraction stress in Filtek $Z-250^{TM}$ compared with other curing modes(P<0.05). 4. LED step-curing mode showed lowest contraction stress in $Filtek\;flow^{TM}$ compared with other curing modes(P<0.05), but difference in contraction stress was not so greate as in $Filtek\;Z-250^{TM}$. 5. Polymerization of composite resin by LED light with step-curing mode and halogen light with continuous ode resulted in better marginal sealing than LED light with continuous mode.
Journal of the korean academy of Pediatric Dentistry
/
v.30
no.1
/
pp.102-109
/
2003
The purpose of this study was to evaluate the linear polymerization shrinkage(%) and microhardness of composite resin(Z-100, 3M, USA) according to 2-step light curing method. Conventional light curing unit(Curing Light 2500, 3M USA) and 2-step light curing unit(Elipar Highlight, ESPE, Germany) were used as light source. The strain gauge method was used for determination of polymerization shrinkage(%). Samples were divided by 3 groups according to light curing methods (Group I : $450mW/cm^2$, 40sec, Group II : $650mW/cm^2$, 40sec, Group III : $150mW/cm^2$, 10sec & $650mW/cm^2$, 30sec). Preparations of acrylic molds were followed by filling and curing. Strain gauges attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Ore-way ANOVA and/or Scheffe test. The results of the present study can be summarized as follows: 1. Composite resin in acrylic molds showed the initial expansion at the early phase of polymerization. This was followed by the contraction with the rapid increase in volume during the first 60 seconds and gradually diminished as curing process continued. 2. The lowest linear polymerization shrinkage(%) was found in group III followed by group I, II during the measuring periods. 3. Group III using 2-step curing method showed statistically significant reduction of linear polymerization shrinkage(%) compared with group I, II at 1 minute and 10 minutes from light irradiation(p<0.05). 4. The microhardness values of each group not revealed significant difference.
This study was performed to evaluate the influence of temperature, relative humidity, and light conditions during healing and acclimatization on the graft-take and growth of grafted peppers (Capsicum annuum L.), in order to propose optimum environmental conditions for the healing and acclimatization of grafted peppers. The healing and acclimatization period was for six days and was divided into three stages (Stage I, II and III), of which each period was two days. Grafted peppers were healed under the condition of 30 and 95% relative humidity (RH) during Stage I. During Stage II and III, grafted peppers were healed and acclimatized under different temperatures ($20^{\circ}C$, $25^{\circ}C$, or $30^{\circ}C$) and RH conditions (75%, 85% or 95%). The growth of grafted peppers was greater under lower temperature and lower relative humidity conditions. The graft-take just after the end of healing and acclimatization was greater grafted peppers under high RH condition. However, the graft-take of peppers which were healed and acclimatized under $30^{\circ}C$ and RH 95%, dropped by about 10 percent on day seven after healing and acclimatization. And also, grafted peppers were healed and acclimatized under the different temperatures ($25^{\circ}C$ or $30^{\circ}C$), RH conditions (65%, 75% or 85%), and light condition (dark or light). Lower RH (to 65%) and light condition at $25^{\circ}C$ during healing and acclimatization promoted the graft-take and growth of grafted peppers.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.31
no.4
/
pp.379-384
/
1995
The retinomotor responses of jack mackerel, Trachurus japonicus and carp, Cyprinus carpio were studied for the different strobe flash frequencies in respects of the application of the light stimulus to herding and barrier system. The strobe flash frequencies ranged at 1.7, 5, 10, 25, 430Hz in jack mackerel and 1.7, 5, 25Hz in carp. The retinal adaptation ratio was examined histologically according to the time elasped of 1, 5, 10, 30min after turning on the light in each experimental condition. Cone index were determined in order to express the retinal adaptation ratio. Jack mackerel showed an increase of the retinal adaptation ratio ranging from average 27% at the pre-stimulus light to 42.6%, 49.8%, 59.8% and 83.1% at the irradiation times of 1, 5, 10 and 30min., respectively. Carp showed an increase of the retinal adaptation ratio ranging from average 28.4% at the pre-stimulus light to 51%, 53.9% and 91.3% at the irradiation times of 1, 5 and 30min., respectively. The light adaptation process was observed to be fast approximately in order of 430Hz, 25Hz, 5Hz, 1.7Hz and 10Hz for jack mackerel, and 25Hz, 5Hz and 1.7Hz for carp, and to be light-adaptated in 30 minutes.
다양한 배양조건을 이용하여 당근 모상근의 생장과 carotenoid 함량을 조사하였으며, 이러한 배양조건을 airlift형생물 반응기에 적용하여 모상근의 다량 배양을 시도하였다. 고형배지 배양에서의 carotenoid 함량은 광조건에서 배양된 모상근이 암조건에서 배양된 모상근보다 10배 정도 증가하였으며, 모상근의 생장은 광조건이 암조건보다 낮은 수준이었다. 공기 유출기 배양에서는 모상근이 광조건과 암조건 모두에서 매우 빠르게 생장하여 생줄량의 차이가 없었으며, 모상근의 생장과 carotenoid 함량에 있어서 빛의 조사는 모상근의 전체적인 생중량을 증가시키기 보다는 배양 후기 생장단계에서 carotenoid 함량을 증가시켜서 암조건에 비하여 10배 정도의 carotenoid(11 $\mu\textrm{g}$/g)를 생산하였다. 모상근을 생물 반응기에서 배양하였을 때, 모상근이 지수함수적으로 빠르게 생장하여 배양 25일 동안에 처음 무게의 11배를 나타내었다. 그리고 pH는 처음 5.5에서 5일후 4.9로 떨어지다가 그 이후에 일정한 수준(pH 4.8)을 보여주었으며, 광주기와 광도을 조절하지 않은 상태에서의 carotenoid 함량은 2$\mu\textrm{g}$/g으로 나타났다.
Journal of Practical Agriculture & Fisheries Research
/
v.22
no.1
/
pp.99-112
/
2020
A edible mushroom, Hypsizygus marmoreus is commercially cultivated. However, the researches of cultivation and physiological characteristics were not conducted in Korea. In this study, we conducted on artificial cultivation of H. marmoreus and elucidated the effect of light on the mycelial growth and fruit body development using LED light sources with different wavelength; blue (peak wave length 460nm), green(peak wave length 530nm), yellow(peak wave length 590nm), red(peak wave length 630nm), and white as positive control. Mycelial growth of H. marmoreus strains were inhibited about 30~40% in inhibition ratio under the illumination with blue, green, yellow LED light. However, red LED light was not inhibited. Elongation of stipe was effective under the long wave length such as yellow and red light. Abnormal fruit body was produced under the long wavelength and dark. However, development of pileus was effective under the short wavelength such as green and blue light. Also, as a result of cultivation with mixed light for high quality and harvest, many effective numbers and yields of fruiting bodies were obtained in the mixed treatment of blue and white light, and pileus developed well.
Proceedings of the Plant Resources Society of Korea Conference
/
2020.08a
/
pp.65-65
/
2020
우리나라의 잇꽃 재배는 2010년 39ha 수준이 재배되다가 2014년에는 76ha 까지 확대되었으나 점차 감소하는 추세를 보이고 있으며 2018년에는 55ha가 재배되고 있는 것으로 보고되었고 주산지는 전라남도와 경상북도로 알려져 있다. 잇꽃(Carthamus tinctorius L.)은 국화과에 속하는 두해살이 초본 식물로 한자명은 홍화(紅花), 영명으로는 Safflower를 사용하고 있다. 우리나라에서 잇꽃 이용은 잇꽃 종실을 위주로 이용되고 있으나 일본의 경우 잇꽃의 경관적 가치를 활용하여 산형현(山形縣)에서는 홍화축제가 매년 개최되고 있으며, 미국 등에서는 잇꽃의 저온 압착유가 기능성 건강식품류로 판매되고 있다. 본 연구는 차광 조건에 따른 잇꽃의 개화특성 및 종자의 지방산 조성을 조사하여 일조시수가 짧은 준고랭지에서 잇꽃의 적응성을 평가하기 위해 수행되었다. 차광조건별로 개화기의 엽면적을 조사한 결과 30% 차광조건에서 9041.0mm2로 무차광에 비해 높아지는 양상을 보였고 50% 이상의 차광에서는 유의하게 낮아지는 경향을 나타냈다. 식물체의 초장은 50% 차광에서 낮아지는 양상이었으며, 주경의 착엽수는 30%와 70% 차광조건에서 18.3매/주 이상으로 증가되는 경향을 보였다. 화서별 착화수에서는 1차 화경 및 2차 화경 모두에서 30% 차광조건에서 착화수가 높은 경향을 나타냈으며 70% 차광조건에서는 2차화경 착화수가 유의하게 낮아지는 경향을 보였다. 차광 조건별로 잇꽃의 개화단계를 비교한 결과 동일한 조사시기에 무차광에서는 개화 3단계의 만개기까지 도달한 비율이 51.6%로 높았으나 50% 이상 차광에서는 11.1%로 낮아 개화가 지연되는 결과를 보였다. 차광조건에 따른 종자의 100립중은 무차광에서 4.9g의로 유의하게 높았으며 차광 비율이 높아질수록 낮아지는 양상이었고 단윔녀적당 종자 수량에서도 무차광이 201.1kg/10a를 보인 반면70% 차광에서는 86.6kg/10a의 낮은 수량을 보였다. 잇꽃 종자의지방산 조성에서 조지방 함량은 18.1~18.6% 범위로 차광조건에 따른 유의한 차이는 없었으며 palmitic acid의 함량은 무차광에서 5.35%로 높았으나, oleic acid의 함량은 30% 차광조건에서 10.2%로 무차광에 비해 높아지는 양상을 나타냈으며 linoleic acid는 50% 차광조건에서 83.6%로 가장 높은 비율을 보였다.
이온이나 플라즈마를 사용해서 박막형성이나 MBE진공증착법에 비해서 분자배열이나 고차구조의 제어 및 그의 다양성에 있어서 LB법에 대한 기대가 크다. 특히 습식법인 점에서 생체기능을 짜넣을 수 있는 분자소자의 개발에는 불가능하다. 역으로 생체분자의 자기조직화나 정보전달기능을 분자 Level로 이해하는 점에서도 LB법은 중요하다고 본다. 또 저차원자성체 전도체 여기자등 물리량에 의한 차원성을 고찰하는 점에서도 LB막의 거동이 주목되고 있다. 또 자발분극된 강유전성의 고분자 즉 Poly등의 박막에 광조사를 하면 광생성된 캐리어가 내부전계에 따라서 이동하고 ~$10^{4}$V 정도의 높은 광기전력을 발생시키는 것도 나타났다. 얻어진 전류는 단지 초전효과를 상회하고 광전류라고 할 수 있다. 쇼트키형 소자의 금속-반도체의 절연막층을 MIS형이라고 하며 특성이 향상된다. SnO$_{2}$/NiPc/Polyethylene막/Al형 광전지가 만들어졌다. 광전변환막이 다양한 목적에 사용되리라 사료되며 지금은 초기 연구단계이나 실용화하는데는 많은 시간이 소요되나 간단한 디바이스 등과 같은 것은 제작이 가능할 것이며 광에너지로 힌한 화학, 전기, 역학 에너지로 변환되는 데는 시간 문제인것 같다. 1년간 일본 동경공업대학 생명이공학부에서 연구한 내용을 정리하여 보았으며 이에 협조하여 주신 문교부 학술진흥재단에 감사드리며 또 등평연구실에 감사드린다.
This study was conducted to develop a method for the quantitative determination of soil clay content by spectophotometry. The optimum wavelength obtained with reference clay minerals for spectrophotometry was 500 nm. For the proposed spectrophotometry, 0.5 g of soil sample was put in the 250 ml Erlenmeyer flask and 100 ml dispersing agent was added. After shaking the flask at 130 rpm with a mechanical shaker overnight, the flask was removed from the shaker and was shaken up-and-down for 30 seconds. With a micro-pipet, 4 ml of the suspension was transferred into the previously-inserted cell and the absorbance was measured instantly. Results by the spectrophotometry for clay content analysis were compared with those by the conventional sedimentation technique (the pipet method). The proposed equation was $y\;=\;38.03x_1-0.17x_2-1.17$, where y, $x_1$, and $x_2$ were clay content (%) by the pipet method, water content corrected clay content (%) by spectrophotometry, and organic matter content ($g{\cdot}kg^{-1}$), respectively. The regression coefficient for the equation was $r\;=\;0.984^{**}$, indicating highly significant correlation between the results of the two methods.
Kim Kwangsin;Kim Kyeongsook;Chung Eun-Su;Son Soon Hwan;Nam Gi-Jung
Proceedings of the Korean Radioactive Waste Society Conference
/
2005.11a
/
pp.87-95
/
2005
Laser sealing/cutting technique, one of the 4 core technologies to manufacture self-luminous glass tubes (SLGTs) has been developed. Through the analysis of commercial products it is found that Pyrex Is used for SLGTs. A CO2 laser, which is commonly used for glass work was used for the study The factors affecting the sealing/cutting were laser intensity, duration. Irradiation method, and pressure inside the tube. The whole Process is composed of 2 stages. In the first stage. both ends of the tubes are sealed while tritium is insected in the tubes. And the tritium sealed tubes are cut in the desired size in the second stage. Defocused beam was used for seal ing and focused beam was used for cutting. After the sealing/cutting, the tubes were heat treated to prevent fracture due to the residual heat stress.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.