• Korean Journal of Acupuncture
• /
• 제29권1호
• /
• pp.83-92
• /
• 2012

Objectives : The purpose of this research was to develop the magnetic acupuncture system which used solenoid coil for magnetizing acupuncture needle. The system could generate the meridian electric potential (MEP) similar to the potential by manual acupuncture. Thus, we tried to confirm the therapeutic effect that is caused by the MEP generation. Methods : To confirm the MEP, we stimulated the magnetic acupuncture with at 2Hz, $92.7{\pm}2mT$, PEMFs (Pulsed Electro-Magnetic Fields) at ST37 and measured the evoked potential between ST36 and ST41. Also, we conducted a fatigue recovery test using isokinetic exercise in order to identify the therapeutic effect on musculoskeletal disorders. We chose LR9 as a stimulation point. To observe the state of fatigue, we measured the EMG and analyzed median frequency and peak torque for 20minutes. Results : We observed that MEP which incurred from magnetic acupuncture was higher than he reported MEP induced by manual acupuncture. Moreover, its modes were divided into two types by the direction of magnetic flux. When generating magnetic flux in the direction of acupoint, the positive peak voltage of the MEP was generated. In contrast, negative peak voltage of the MEP was generated whenever meganetic flux generated in the outward direction. As a result of fatigue recovery, the median frequency (MF) of the magnetic acupuncture group were recovered faster than that of the non-stimulation group. However, the peak torques of both groups were not restored until after 20 minutes. Conclusions : We confirmed that the magnetic acupuncture system can lead to the MEP similar to manual acupuncture. Moreover, the MEP had a therapeutic effect on the musculoskeletal disorders.

• 한국작물학회지
• /
• 제60권3호
• /
• pp.300-307
• /
• 2015

잡곡의 안정적 생산체제 마련을 위한 답전윤환 최적 모델개발의 일환으로 답전윤환에 있어서 논으로부터 밭1년과 밭2년차 재배에 있어 조, 수수, 기장과 벼연속구와 논-밭-논 윤환구의 벼의 생육 및 수량특성을 조사 분석한 결과는 다음과 같다. 1. 조의 4품종 평균 출수소요일은 밭1년차에는 76.3일 소요되었으나, 밭2년차는 평균 70.5일 소요되어 약 6일정도 출수소요일이 짧았다. 포기당 이삭수는 밭1년차가 평균 2.2이삭이었으나, 밭2년차는 평균 3.3이삭으로 포기당 1이삭이 증가하였다. 10a 당 수량은 밭1년차가 179 kg이었으나, 밭2년차는 220.3 kg을 나타내 약 23% 증수하였다. 2. 기장 4품종의 평균 출수소요일 67일 소요되었으나, 밭2년차 기장은 평균 64.8일 소요되어 밭1년차에 비해 밭2년차가 약 2일 일찍 출수하였다. 포기당 이삭수는 밭1년차에서 4.2이삭이었던 반면 밭2년차에서는 평균 8.3이삭으로 약 4이삭이 증가하였다. 10a 당 평균수량은 밭1년차는 130.8 kg이었으나, 밭2년차는 152.8 kg으로 16.8% 증수하였다.3. 수수의 경우 5품종 평균 출수소요일은 밭1년차 68.6일 소요되었으며 밭2년차는 평균 67.4일 소요되어 큰 차이가 없었다. 수당립수는 밭1년차는 2,619.6립 이었으며, 밭2년차는 평균 2,931.6립으로 약 12% 증가하였다. 10a 당 평균 수량은 밭1년차는 231.7 kg으나, 밭2년차 평균수량은 242.3 kg으로 4.6% 증수하였다. 4. 벼연속구와 논-밭-논 윤환구에서의 벼의 생육 및 수량 특성을 보면 출수기는 차이가 없었다. 간장은 논연속구 75.6 cm에 비해서 논-밭-논 윤환구가 82.9 cm로 7.3 cm 컷으며, 수장도 논연속구에 비해 논-밭-논 윤환구가 1 cm 컷다. 포기당 이삭수는 논연속구가 20.7이삭, 논-밭-논 윤환구는 25.0이삭으로 논연속 윤환구에 비해 윤환구가 4.3 이삭 많았다. 10a당 수량은 논연속구가 479.9 kg, 논-밭-논 윤환구는 526.8 kg으로 연속구에 비해 윤환구가 9.8% 높았다.

• 한국치위생학회지
• /
• 제20권6호
• /
• pp.875-888
• /
• 2020

Objectives: The purpose of this study was to investigate the infection control system and actual conditions according to the type of dental medical institution. Methods: From April 1st to May 10th, 2020, dental institutions were recruited through stratified random sampling. Each item constituting the infection control system by dental institution type was analyzed using the chi-square test and fisher's exact test. Results: The infection control system and operation level of each dental institution type was 89.0 points for university-general hospitals, 75.6 points for dental hospitals, and 34.4 points for dental clinics. The environment management levels were 76.1, 72.5, 73.0, and 74.0 points for university-general hospitals, similar to 77.2, 75.1, 71.0, and 73.8 points for dental hospitals, while dental clinics had 61.1, 40.0, 37.0, and 45.6 points. Prevention and management of staff infection exposure, wearing personal protective equipment, and hand hygiene levels were 90.7, 75.5, 88.5 points for university-general hospitals, 79.8, 79.5, 80.4 points for dental hospitals, and 50.2, 88.0, 61.5 points for dental clinics, respectively. Conclusions: Efforts are required to bring about improvement in the areas of insufficient infection control in order to raise the overall infection control levels, especially the management of dental clinics is urgently needed.

• World Technopolis Review
• /
• 제1권1호
• /
• pp.16-26
• /
• 2012

Many scientists today say that converged technologies, not specifically dedicated technologies, will be in the vanguard in the $21^{st}$ century. Technological Convergence is the merging of different areas of technology to perform similar tasks. Since we are living in the era of Technological Convergence, it is time for us to think about how to cope with the daily demands we are facing in science parks. Technological Convergence is a mega trend in commercial areas today but, so far, no science parks seem to have tried to reshape their management policies or programs in order to utilize this trend. For the development of science parks we suggest some tasks such as: identify potentials for Technological Convergence, establish a convergent ecosystem by building connections across stove-piped systems, effect a technological convergence platform, and conduct further research for strengthening plans for converging technologies.

• 한국측량학회지
• /
• 제8권1호
• /
• pp.1-13
• /
• 1990

본 연구에서는 우리나라의 새로운 측지자표계와 준거타원체의 설정 및 국가기준점(삼각점)의 실용성과 산출에 관한 기본 방향을 제시하였다. 또한, 정밀 1차, 2차 기준점측량성과를 기초로 한 삼각점 실용성과갱신(부분갱신)의 기본 방향도 제시하였다.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.469-475
• /
• 2006

In this paper, an optimal suspension system with preview of the road input is synthesized for a half tracked vehicle. The main goal of this research is to improve the ride comfort characteristics of a fast moving tracked vehicle in order to maintain the driver's driving capability. Several different kinds of preview control algorithms are evaluated with active or semi-active suspension systems. The road information estimated from the motion of the 1st road-wheel is adequate to make the best use of the preview control algorithm for tracked vehicles. The ride-comfort characteristics of the tracked vehicle are more dependent on pitching angular acceleration than heaving acceleration. The pitching motion is reduced by the suspension system with hard outer suspensions and soft inner suspensions. Simulation results show that the performance of sky-hook algorithms for ride comfort nearly follow that of full state feedback algorithms.

• 소음진동
• /
• 제5권4호
• /
• pp.483-492
• /
• 1995

For evaluation of rotational accuracy performance of high speed machine tool spindle system, the characteristics of main spindle and tool motion behavior are presented by means of three point accuracy testing method. The results of experiments and analyses are as follows: (1) The high speed spindle rotational accuracy can be evaluated by the combination of the spindle and tool motion behavior. (2) The spindle motion behavior increases up to more that 4 times the tool motion behavior. (3) For the influence of oil viscosity on spindle and tool taper application, 32 cSt of oil viscosity showed the most satisfactory result for rotational accuracy. (4) In order to improve the rotational accuracy of high speed machine tool spindle system, it is needed to reduce the combination error. This can be achieved by improving the working accuracy and supplying the proper lubrication with contact area at the spindle and tool.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.685-689
• /
• 2004

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of HVAC(Heating, Ventilating and Air-Conditioning) for double' deck train. The HVAC system is installed under the roof of carbody. In the lay-out of HVAC system, air duct must be installed to supply air to 1st and 2nd floor respectively. The standard k-$\epsilon$ and LES models for turbulence and SIMPLE algorithm for pressure equation hased on finite volume method are used to solve the physic a] HVAC model. To assure convergence, QUICK scheme for momentum equation and the 2nd order upwind scheme for turbulent equations arc used. From the results of simulation, the temperature and velocity magnitude are also distributed uniformly in the interior of double-deck passenger car.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.252-254
• /
• 1992

This paper proposes a new algorithm that finds fuzzy control law of the system in which little knowledge has been known. In view or conventional fuzzy method, making control law needs the sense and the knowledge of the system which are provided by expert. But fuzzy control using proposed algorithm needs no expert for hating control law. After construction of the 1st order approximated ARMA model using input-output pairs, new defuzzification method is applied. The deduced rule is stored in fuzzy input space and updated by the proposed algorithm adaptively. To show the validity and effectiveness of proposed control method. simulation result is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.361-364
• /
• 2002

In this paper, we propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is $Pad'{e}$-approximated, then initial values are determined by the Ziegler-Nickels method. So deciding binary strings of parents generation using by the fitness values of genetic algorithms, we perform selection, crossover and mutation to generate the descendant generation. The advantage of this method is better than the Ziegler-Nickels method in characteristic of output, and has extent of applying without limit of K, L, T parameters.