• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.161-168
• /
• 2015

In this paper, we present an inertial sensor-based gait distance measurement system using accelerometer, gyroscope, and magnetometer. To minimize offset and gain error of inertial sensors, we performed the calibration using the self-made calibration jig with 9 degrees of freedom. For measuring accurate gait distance, we used gradient descent algorithm to remove gravity error and used analysis of gait pattern to remove drift error. Finally, we measured a gait distance by double-integration of the error-removed acceleration data. To evaluate the performance of our system, we walked 10m in a straight line indoors to observe the improvement of removing error which compared un-calibrated to calibrated data. Also, the gait distance measured by the system was compared to the measurement of the Vicon motion capture system. The evaluation resulted in the improvement of $31.4{\pm}14.38%$(mean${\pm}$S.D.), $78.64{\pm}10.84%$ and $69.71{\pm}26.25%$ for x, y and z axis, respectively when walked in a straight line, and a root mean square error of 0.10m, 0.16m, and 0.12m for x, y and z axis, respectively when compared to the Vicon motion capture system.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.28 no.3
• /
• pp.121-128
• /
• 2024

There are growing concerns that the recently implemented Earthquake Early Warning service is overestimating the rapidly provided earthquake magnitudes (M). As a result, the predicted damages unnecessarily activate earthquake protection systems for critical facilities and lifeline infrastructures that are far away. This study is conducted to improve the estimation accuracy of M by incorporating the observed S-wave seismograms in the near source region after removing the site effects of the seismograms in real time by filtering in the time domain. The ensemble of horizontal S-wave spectra from at least five seismograms without site effects is calculated and normalized to a hypocentric target distance (21.54 km) by using the distance attenuation model of Q(f)=348f^0.52 and a cross-over distance of 50 km. The natural logarithmic mean of the S-wave ensemble spectra is then fitted to Brune's source spectrum to obtain the best estimates for M and stress drop (SD) with the fitting weight of 1/standard deviation. The proposed methodology was tested on the 18 recent inland earthquakes in South Korea, and the condition of at least five records for the near-source region is sufficiently fulfilled at an epicentral distance of 30 km. The natural logarithmic standard deviation of the observed S-wave spectra of the ensemble was calculated to be 0.53 using records near the source for 1~10 Hz, compared to 0.42 using whole records. The result shows that the root-mean-square error of M and ln(SD) is approximately 0.17 and 0.6, respectively. This accuracy can provide a confidence interval of 0.4~2.3 of Peak Ground Acceleration values in the distant range.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1052-1058
• /
• 2003

The possibility of micro/nano machining through electro-chemical process is discussed in this research. Electro-chemical dissolution region is localized within 1 ${\mu}m$ by applying ultra short pulses with tens of nanosecond duration. The effects of voltage, pulse duration, and pulse frequency on the localization distance are investigated. Localization distance can be manipulated by controlling the voltage and pulse duration, and various hole shapes are produced including stepped holes and taper free hole. High quality micro-hole with 8 ${\mu}m$ diameter with 20 ${\mu}m$ depth and micro-groove with 9 ${\mu}m$ width with 10 ${\mu}m$ depth are machined on 304 stainless steel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.1
• /
• pp.80-86
• /
• 2013

The 3-Dimensional(3D) localization system based on beacon expansion and coordinate-space disassembly for the design of the 3D localization system in indoor environment is proposed and the performance of the proposed system is analyzed in this paper. The localization ratio of the 3D localization system adapts the proposed algorithm is analyzed by the calculation of errors occurred in the coordinates that the mobile node locates. It is indicated that the average error distance of the 3D localization system adapts the proposed algorithm is less than that of the 3D localization system not adapts the proposed algorithm as 0.47m. The localization average distance error in 12 coordinates is indicated that the 1.5m case is less than 2.5m case as 0.38m by some experimentations under the condition that the distances between the ceiling and the mobile node are 1.5m and 2.5m measured from the ceiling respectively. It is seen that the 3D localization system based on beacon expansion and coordinate-space disassembly can improved the degradation of the quality of service that is caused by some conditions and performance differences in sensors.

• Tribology and Lubricants
• /
• v.16 no.1
• /
• pp.15-21
• /
• 2000

Radiation of Nd-YAG laser changes and refines the surface microstructure of steels, which gives rise to enhancement of hardness and resulting wear resistance. In the present work, the effect of processing parameters during the surface modification with laser on the wear behavior of the SM45C steel was studied by means of wear testing. The counter material was alumina ceramics. The microstructure observation revealed the dependence of molten depth and width on the defocusing distance. The laser modification of steel surface give rise to improved wear resistance in the testing speed range of either <0.2 m/s or >0.9 m/s Material transfer from steel was wear observated the surface of counter material when testing speed was lower than 0.7 m/s.

• Journal of Environmental Impact Assessment
• /
• v.15 no.1
• /
• pp.53-65
• /
• 2006

Topographic condition is one of the most important things in farming activities. The topographic condition didn't matter for farming in the past because agricultural products had competitive power in the market. So farmers tried to extend their farms without any concern of topographic condition. We need less labor-consuming farming as industrial structure has been changed and the competitive power of the farming has been getting weak. This study analyzed the fallow potential in agricultural area by topographic condition so that we have got results as follows. Maps of elevation, slope, distance from roads and water resources were made for getting a fallow probability model in farms, and these 4 factors were used as independent variables while a variable on whether it is fallow or not is a dependent variable in logistic regression model. In an analysis of the fallow potential depending on farm land types, the fallow probability in fallow orchard showed the highest value of farm lands, 0.973. Cultivated orchard had 0.730 and upland had 0.616 of the fallow probability. The fields having high fallow potential had high elevation, steep slope, and long distance from water resources and roads. Especially, fields having a probability over 0.99 appeared in orchards, fallow uplands and single cropping uplands, which were recognized to have several disadvantages related to the fallow like as high elevation, steep slope, and long distance from water resources and roads. With the logistic analysis, the suitable farm lands appeared at 16.45m of the mean elevation, 1.89 degree of the mean slope, 39.91m of the average distance from water resources, and 32.39m of the average distance from roads. On the contrary, non-suitable land appeared at 114.7m of the mean elevation, 24.9 degree of the mean slope. The distance from roads was more important variable than the distance from water resources for analyzing suitable farm land.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.101-105
• /
• 2011

This paper calculates protection distance to protect WiBro service from ISM(Industrial Scientific Medical) equipment which is used in the same frequency with WiBro. We analyze with a scenario that WiBro receiver is closed to ISM equipment which has interfering power of CISPR(International Special Committee on Radio Interference) 11 limit. As a result, the protection distance of 14 m was calculated by using MCL (Minimum Coupling Loss) for the worst case. And, the protection distance of 10 m was calculated to meet 5 % interference probability below by using MC(Monte Carlo) for statistic analysis in case of a interferer.

• Explosives and Blasting
• /
• v.21 no.1
• /
• pp.69-76
• /
• 2003

Test blasting has been performed with V-cut to investigate the characteristics. Blasting vibrations were measured at two directions, the proceed direction and side direction. Propagation characteristics were determined by regression analysis; square root scaled distance and cube root scaled distance with maximum charge per delay of the blast. Testing result, The cross point was 62m in the allowable vibration velocity of 3mm/sec and 46m In 5mm/sec. Also, vibration level with measuring point was highest and decayed fastest, adapting to cube root scaled distance, for the proceed direction on ground.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.267-274
• /
• 2001

A prototype experiment on the anchovy boat seine was carried out in the southern sea of korea to analyze the vertical opening and the underwater geometry. The vertical opening and the underwater geometry of the prototype net were determined by distance of Minilog position with the combinations of the distance between paired boats and the towing speed. The results osbtained can be summarized as follows; 1. Vertical opening of the protype net was gradually lowered according to the increase of the distance between paired beats and the towing speed. 2. Vertical opening of Wing net, Inside wing net, Square, Fore bag net, Flapper and After bag net of the prototype net according to the distance between paired boats were varied in the range of 8.4~9.0, 15.7~17.4, 12.9~17.9, 13.6~19.0, 8.3~8.4, 11.1~14.7m respectively, varied in the range of 12~16, 22~24, 27~38, 59~83, 92~93, 41~54% of the normal opening respectively. 3. Vertical opening of Wing net, In side wing net, Square, Fore bag net, Flapper and After bag net of the prototype net according to the towing speed were varied in the range of 7.7~10.5, 19.6~21.6, 12.2~16.9, 15.4~17.1, 8.0~8.2, 13.7~14.7m respectively, varied in the range of 14~19, 27~30, 32~36, 67~74, 89~91, 51~54% of the normal opening respectively. 4. Prototype net was appeared apparent the pocket shape, because Wing net and Inside wing net was opened 20% of the normal opening. 5. Working depth of the prototype net was gradually shallow according to the increase of the distance between paired boats and the towing speed.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.436-441
• /
• 2013

An experiment using a 5 m-long sand column was performed to evaluate the resisting capability against micro-pollutants of the infiltration gallery, multi-purpose filtration pond and riverbank/bed filtration, of which the filtration distance is becoming increasingly shorter in Korea. Results suggested that the Korean riverbed sand contained significant amount of organics, resulting in a relatively vigorous adsorption of chloride ion on the sand surface. Results also indicated that while phenol was not detected in the column filtrate, both 1,4-dioxane and diazinon were exposed to adsorption by the sand as they moved through the column, decreasing their peak concentrations during the movement. It can be expected that the peak concentrations will diminish significantly in the practical scale due to its longer travel distance.